LINOVISION IOT-R41: Industrial 4G LTE Router

Low Power Consumption Design

Product Overview

[Image Description: A compact, black industrial router with two antennas, a USB port, and indicator lights. It is connected to a small power adapter.]The LINOVISION IOT-R41 is a Mini Industrial 4G LTE Router designed for demanding environments, offering low power consumption and robust connectivity.

Outstanding Features

4G LTE CAT4/3G Network With Multiple Carrier Networks
Super Compact Dimension (70 x 55 x 22 mm) Ideal for Embedded Scenes
Support DC 5-24V Wide Voltage Input
Power Consumption as low as 60mA with Smart Operating Modes
Supports RS232/RS485 and DI / DO Remote Control
USB 2.0 (Type-C) for Power Supply, Network Supply, and Debug
Industrial Design for Harsh Environment
Support Fail-over and Watchdog for a Robust Connection
GPS and Global Navigation Satellite System (GNSS) Included
Support Various VPN for Remote and Secure Connectivity
Remote and Bulk Management for Easy Maintenance

Specifications

Hardware System

CPU	ARM Cortex-A7, 528 MHz
Memory	128 MB DDR3 RAM and 128 MB Flash

Cellular Interface

Network	4G LTE (CAT 4)/WCDMA/GSM
Antenna Connector	1 × 50 Ω SMA Connector (Center PIN: SMA Female)
SIM Slot	1 (Nano SIM-4FF)

Ethernet Interface

Numbers	1 × 10/100 Mbps LAN Port
Mode	Full or Half Duplex (Auto-Sensing)

GNSS

Antenna Connector	1 × 50 Ω SMA Connector (Center PIN: SMA Female)
Technology	GPS/GLONASS/Beidou/Galileo/QZSS

Serial Interface

Number	1 x RS232 or 1 x RS485 (Software Switchable)
Connector	3.5mm Terminal Block
Terminal Resistor	1 × 120 Ω Resister Switch (for RS485)
Baud Rate	300bps to 230400bps

DI/DO

Numbers	1 x DI (dry contact) + 1 x DO (wet contact), Galvanic Isolation
Connector	3.5mm Terminal Block
Maximum V/A	0.3A@30VDC (DO)

Others

Reset Button	1 × RESET
USB	1 × USB 2.0 (Type-C) for Power Supply, Network Supply and Debug
LED Indicators	1 × SYSTEM, 1 × SIM
Built-in	Watchdog, Timer

Software

Network Protocols	IPv4/IPv6, PPP, PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, RIPv1/v2, OSPF, DDNS, VRRP, HTTP, HTTPS, DNS, ARP, QOS, SNTP, Telnet, SSH, etc.
VPN	DMVPN, IPsec, OpenVPN, PPTP, L2TP, GRE
Security	SPI Firewalls, Access Control (ACL), DMZ, Port Mapping, MAC Binding, DoS&DDoS Protection, Filtering(IP&Domain)
Management	Web, CLI, SMS, On-demand dial up, SNMP v1/v2/v3, DeviceHub, VPN
AAA	Radius, Tacacs+, LDAP, Local Authentication
Multilevel Authority	Multiple Levels of User Authority
Serial Port	Transparent(TCP Client/Server, UDP), Modbus Master/Slave, Modbus Gateway (Modbus RTU to Modbus TCP)

Power Supply and Consumption

Power Connector	2-pin 3.5 mm Terminal Block
Power Input	1. 5-24 VDC, with Surge-Protection and Reverse Polarity Protection 2. 5V/1A by USB Type-C Port
Power Consumption	Idle: 78mA@12V Data link: 226mA (peak)@12V Standby mode: 6.3 mA@12V

Physical Characteristics

Ingress Protection	IP30
Housing & Color	Metal, Black
Weight	103g
Dimension	70 x 55 x 22 mm (2.76 x 2.17 x 0.87 in)
Installation	Desktop, Wall Mounting

Environmental

Operating Temperature	-40°C to +60°C (-40°F to +140°F)
Storage Temperature	-40°C to +85°C (-40°F to +185°F)
Ethernet Isolation	1.5 kV RMS
Relative Humidity	0% to 95% (Non-condensing)

Dimensions

[Diagram Description: Orthographic views of the router. Front view shows width 70mm and height 60.7mm. Side view shows depth 22mm and height 55mm. Top view shows width 70mm and depth 55mm. Rear view shows ports.]The router measures 70mm in width, 55mm in depth, and 22mm in height.

Ordering Information

Model	Band
IOT-R41(US)	LTE-FDD:B2/B4/B5/B12/B13/B25/B26 WCDMA: B2/B4/B5
IOT-R41(EU)	LTE-FDD: B1/B3/B7/B8/B20/B28 WCDMA: B1/B8 GSM/EDGE: B3/B8
IOT-R41(AU)	LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66 WCDMA: B1/B2/B5/B8 GSM/EDGE: B2/B3/B5/B8

* Any other frequency band requirements please contact us.

	Linovision IOT-R32W Industrial 4G LTE Cellular Router Specifications Detailed specifications for the Linovision IOT-R32W Industrial 4G LTE Cellular Router, including network connectivity, protocol support, industrial design, security features, hardware and software specifications, and package contents.
	Linovision IOT-R32 Industrial Cellular Router Quick Start Guide This guide provides essential information for installing and configuring the Linovision IOT-R32 industrial cellular router, including hardware setup, PC configuration, and network connection methods (WAN and cellular).
	Linovision IoT-R32L Industrial Cellular Router Quick Guide A concise guide to installing and configuring the Linovision IoT-R32L industrial cellular router, covering hardware overview, installation, login, and network setup.
	Linovision Cellular Routers: A Selection Guide Compare the specifications of Linovision's IoT-R32L, IoT-R32W, and IoT-R75W cellular routers to find the best fit for your needs.
	LINOVISION IOT-R51W vSIM Routers User Manual User manual for the LINOVISION IOT-R51W vSIM Router, covering installation, PC connection, web platform access, WiFi settings, use cases, and troubleshooting.
	Linovision IOT-R75W Quick Start Guide A quick start guide for the Linovision IOT-R75W industrial cellular router, detailing installation, hardware overview, and basic network configuration steps.
	LINOVISION IOT-R32W Router: DI/DO Instructions Guide Comprehensive instructions for the LINOVISION IOT-R32W Router, detailing its Digital Input (DI) and Digital Output (DO) functionalities, connection diagrams, configuration via SMS, CLI, Modbus TCP, and Modbus RTU.
	Linovision IOT-R32W Quick Start Guide: Installation and Setup Get started with the Linovision IOT-R32W industrial cellular router. This quick start guide covers installation, hardware overview, and basic Web GUI login procedures for efficient setup.