HelloBaby P37RX Video Baby Monitor

Product Overview

This document is the user manual for the HelloBaby P37RX 2.4GHz Digital Wireless Video Baby Monitor, providing essential information for setup, operation, and safety.

Model: P37RX

Manufacturer: Videotimes Technology (Hubei) Co.,Ltd

Important Safety Instructions

⚠️ IMPORTANT SAFEGUARDS ⚠️

When using your baby monitor, basic safety precautions should always be followed, including the following:

• Read all instructions before using the product.
• This product is not a substitute for responsible adult supervision.
• Do not use this product near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Protect the power cord from being walked on or pinched.
• Only use attachments and accessories specified by the manufacturer.
• Unplug this product during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel.
• Do not attempt to repair the product yourself.
• This product is intended for indoor use only.
• The AC adapter is the disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The baby unit should be placed at least 3 feet (1 meter) away from the crib.
• Do not place the baby unit inside the crib.
• The parent unit is not a toy and should be kept out of reach of children.

Product Features

The HelloBaby P37RX offers:

• 2.4GHz FHSS digital technology for secure and interference-free connection.
• High-resolution color LCD display.
• Two-way talk-back communication.
• Infrared night vision for clear viewing in the dark.
• Temperature monitoring.
• Lullabies.
• Out-of-range alert.
• Low battery alert.
• Expandable up to 4 cameras (sold separately).

Setup and Operation

Parent Unit Setup:

1. Connect the AC adapter to the parent unit and plug it into a power outlet.
2. Charge the parent unit fully before first use.
3. Turn on the parent unit by pressing the power button.

Baby Unit Setup:

1. Connect the AC adapter to the baby unit and plug it into a power outlet.
2. Place the baby unit in the desired location, ensuring it has a clear view of the baby.
3. Turn on the baby unit (if applicable, or it may be powered by the adapter).

Pairing:

The parent and baby units are pre-paired. If pairing is lost or you add a new camera, follow the pairing instructions in the full manual.

Using the Talk-Back Feature:

Press and hold the "Talk" button on the parent unit to speak to the baby. Release the button to listen.

Regulatory Information and Warnings

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

AVERTISSEMENT

ATTENTION : Ce moniteur bébé est destiné à être utilisé comme une aide. Il ne remplace pas une surveillance adéquate par un adulte.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Statement

Hereby, Videotimes Technology (Hubei) Co.,Ltd declares that this P37RX is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

UKCA Statement

Hereby, Videotimes Technology (Hubei) Co.,Ltd declares that this P37RX is in compliance with the relevant UK legislation.

RoHS Statement

This product complies with the Restriction of Hazardous Substances (RoHS) Directive.

WEEE Statement

This symbol indicates that the product should not be disposed of with household waste. It should be handed over to a designated collection point for the recycling of electrical and electronic equipment.