Flydigi Apex 3 Elite Gaming Controller User Manual

Connection Controller

Press and hold the HOME button for 3 seconds to enter the Menu. From here, you can set the controller mode, configuration, brightness, and other settings.

Platform Connectivity

PC Connection

When using on a PC, please change the controller to Xinput mode.

Modes: Wireless mode, Wired mode.

Android Mobile Connection

When using on an Android Mobile, please change the controller to Android mode.

STEP 1: Scan the QR code and download the Android Flydigi Game Center APP.

STEP 2: Enter the APP, navigate to peripheral management, click 'Connection Controller', and follow the guide for controller connection in the Android Game Center.

Nintendo Switch Connection

When using on Switch, please change the controller to Switch mode.

Open the Switch, enter the [Handle] option, and long press the HOME button to successfully pair. The button mapping relationship in Switch mode is provided below. If paired and connected, pressing the HOME button can wake up the Switch from standby state.

Force Feedback Triggers Quick Experience

Flydigi presets 3 force feedback modes. Long press the Home button to enter the Menu, then navigate to the [Configuration] page to quickly change modes.

Configuration 1: General Mode

Force feedback trigger not turned on (factory default).

Configuration 2: Racing Mode

Simulate the throttle feel.

Configuration 3: Sniper Mode

Simulate the hand feel of the gun's paragraph trigger.

Configuration 4: Machine Gun Modes

Simulation of high-frequency recoil for auto-firing.

Advanced Gameplay & Customization

Visit Flydigi's official website www.flydigi.com to download [Flydigi Space Station]. This software allows customization of trigger settings, button mapping, lighting effects, and more.

Flydigi PC Space Station Features

Force Feedback Trigger Adjustment

Adjustable force feedback mode, setting strength, stroke, vibration, etc.

Lighting Adjustment

Adjustable lighting mode, set light color, brightness, etc.

Button Customization

Adjustable key mapping, setting macro commands and connecting points.

Display Picture Settings

Adjustable display animation, set custom pictures.

Appearance and Components

The controller features a central "HOME" button. On the top face, there are two analog joysticks, one on the left and one on the right. Below the left joystick is a circular directional pad (D-pad). To the right of the joysticks, arranged in a diamond pattern, are the face buttons: A, B, X, and Y. A "SELECT" button and a "START" button are positioned to the left and right of the HOME button, respectively, with a "CAPTURE" button located below the START button. The controller includes a full-color interactive screen above the HOME button. The top casing is removable. The controller also features adjustable RBG lighting and replaceable light boards, along with adjustable force feedback triggers on the top shoulders.

On the back of the controller, there are four remapping back buttons located on the underside of the grips. Magnetic charging contacts are present on the bottom for charging. A holder slot is available, and a power switch is located on the bottom edge.

Parts Description and Disassembly

Removable Upper Cover

Please remove the D-pad before disassembling. Then, lift the gap of the eye handle grip to remove the upper cover.

Replaceable Joystick

Pull the joystick out vertically to remove or install it. Joysticks of different heights are suitable for different games.

The Name and Content of Harmful Substances in the Product

This form is prepared in accordance with the provisions of SJ/T 11364.

○ Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572-2011.

× Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specified in GB/T 26572-2011.

Other Accessories

Included accessories are: USB-C cable, USB wireless dongle, Personalized light card, Replacement joysticks, Carrying Case, Light card pin, Sticker.

Note: The replaceable light plate comes with an accessory kit and can be replaced by yourself. For usage, refer to the instructions provided with the light plate accessory kit. Due to different versions, there may be differences in included accessories (Flydigi controller charging base needs to be purchased additionally).

Frequently Asked Questions (Q&A)

Q: The controller cannot connect to the Dongle and Bluetooth device.

A: Select Pairing in the on-screen menu, it shows Pairing, then turn on the phone's Bluetooth again, or plug the wireless dongle into the device's USB port, keeping the controller close to the receiver.

Q: The controller connects the device through the wireless dongle, but the button fails.

A: Avoid the receiver being too far away, ensure there is no blockage between the dongle and the controller, and check for nearby electronic devices that might generate electromagnetic interference.

Q: The joystick cannot return to the center, the trigger is triggered by mistake, and the body sensation is not controlled.

A: Press and hold the SELECT + START + right joystick for three seconds to enter calibration mode. First, leave the controller on the desktop for 5 seconds. Then, push the left and right joysticks to the end and rotate them twice. Next, press the trigger twice. Finally, press SELECT + START + right joystick simultaneously to complete the calibration.

Q: Upgrade the controller firmware.

A: Install the Flydigi game center on your mobile device or the Flydigi PC Space Station on your computer, and upgrade the firmware according to the instructions within the software.

Specifications

RF: Bluetooth 5.0, Bluetooth 5.0 BLE

Operating distance: Less than 10 meters

Battery information: Rechargeable lithium-ion battery, battery capacity 1500mAh, charging time 3-4 hours, charging voltage 5V, charging current 1000mA.

Working current: Less than 80mA in use, and less than 0.4mA in standby.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Product Details

Product weight: 310g

Temperature range: -5 °C ~ 50 °C when in use

Humidity range: 20% ~ 80% when used