Direwolf Gaming Controller
User Manual
When the product is shipped, the English version of the user manual will be displayed in the form of an online document, which can be viewed by scanning the QR code.
Controller FCC ID: 2AORE-FP1
Dongle FCC ID: 2AORE-R2
Dongle Bluetooth Version: 3.0
Connection - Use on the Computer
Wireless Dongle Connection
1. Plug the [USB Dongle] into the USB port of the computer.
2. Set the controller back switch to the [Wireless Mode] position.
3. Click the [Connect Button] (often indicated by a home or sync button), the controller will automatically connect. At this time, the light is always white.
4. If the light is blue, press and hold the [Home Button] + X key at the same time. Until the light turns white, press and hold the [Connect Button] until the light flashes, unplug the dongle and reinsert it to complete the pairing.
Wired Connection
Turn the controller back switch to the [Wired Mode] position, connect the PC and controller through the USB cable. The light will stay in white. Connection successful.
Connection - Use on Switch
1. Click the controller icon on the Switch and enter [Change Grip/Order].
2. Set the controller back switch to the [Switch Console Icon] position.
3. Press and hold the [Connect Button] for 3 seconds until the light flashes blue. The controller will be auto-paired, and the light will stay in blue.
4. For daily use, set the back switch to the [Switch Console Icon] position and click the [Connect Button], the controller will auto-connect.
| SELECT | START | Home | Capture | Switch | ||||
|---|---|---|---|---|---|---|---|---|
| A | B | X | Y | - | + | |||
| B | A | Y | X | - | + |
Connection - Use on Android Devices
1. Set the back switch to the [Bluetooth Icon] position.
2. Press and hold the [Connect Button] for 3 seconds until the light flashes blue. The controller will enter pairing mode.
3. Turn on the device Bluetooth and connect to "Flydigi Direwolf". The light will stay in blue.
4. For daily use, set the back switch to the [Bluetooth Icon] position and click the [Connect Button], the controller will auto-connect.
Connection - Use on iOS Devices
Set the back switch to the [Apple Icon] position. Turn on the device Bluetooth and connect to "Xbox Wireless Controller". The light will stay in blue.
Specifications
| Mode | Platform | Light | Connection Method | System Requirements |
|---|---|---|---|---|
| [USB Dongle] | PC | White | USB Dongle | Win 7 and above |
| [Bluetooth Icon] | PC/Android | Blue | Wired/Bluetooth | Wired: Win 7 and above Bluetooth: Android 10 and above |
| [Switch Console Icon] | Switch | Blue | Bluetooth | Switch |
| [Apple Icon] | iOS | Blue | Bluetooth | iOS 14 and above |
Radio frequency: Wireless, Bluetooth 5.0
Use distance: less than 10 meters
Battery information: Rechargeable lithium-ion battery, battery capacity 450mAh, charging time 3 hours.
Charging voltage: 5V, charging current: 350mA
Working current: The current is less than 40mA during use, and the current is less than 20µA during standby.
Product weight: 175 g
Temperature range: 5 °C – 45 °C for use and storage.
Appearance
Controller Diagram:
- Top View: Features a Hybrid D-Pad, FN button, two Additional Remappable Back Buttons, Home button, and a USB Port.
- Bottom View: Includes two Additional Remappable Back Buttons and a Handle mode gear.
Other Accessories (Multi-mode)
- USB-C cable
- USB wireless Dongle
Note: The Handle mode gear is for multimode use only.
Flydigi Space Station, Set Your Own Customization
Visit the official Flydigi website (www.flydigi.com) to download "Flydigi Space Station". This software allows you to customize buttons, macros, somatosensory functions, triggers, and other features.
Flydigi Space Station Features
Button Mapping: Buttons can be mapped as controller buttons, mouse clicks, or keyboard keys.
Macro Definition: Set up continuous button presses, record joystick and key data to simplify complex operations.
Somatosensory Mapping: The somatosensory (gyroscope) can be mapped to mouse movement, enabling highly accurate aiming in shooting games.
Trigger Adjustment: Adjustable trigger stroke and dead zone settings to meet requirements for various game scenarios.
Q&A
Q: The controller cannot be paired with the Dongle or Bluetooth device?
A: Please ensure the controller back switch position is correct. Long press the [Connect Button] for 3 seconds until the light flashes. The controller will enter pairing mode. Unplug the Dongle and reinsert it, then cancel the paired device on the Bluetooth settings page and reconnect.
Q: How to upgrade the handle firmware?
A: Install "Flydigi Space Station" on your computer, or install the "Flydigi Game Center" App on your mobile phone, following the software's "Guide to firmware upgrade".
Name and Concentration of Toxic or Hazardous Substances and Elements
| Part Name | Pb | Hg | Cd | Cr | PBB | PBDE |
|---|---|---|---|---|---|---|
| PCBA | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Outer casing | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Packaging | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Wires | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Polymer battery | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Silicone | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Metal, adhesive tape and small structural parts | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
This table is based on the regulations of SJ/T 11364-2014.
⚪ indicates that the concentration of the toxic or hazardous substance in all homogeneous materials in this part is below the limit requirement in GB/T 26572-2011.
❌ indicates that the concentration of the toxic or hazardous substance in at least one homogeneous material of this part exceeds the limit requirement in GB/T 26572-2011.
The environmentally-friendly use period of this product is 10 years based on normal operating conditions. [10 Year Eco-Friendly Use Period]
Federal Communications Commission (FCC) Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. The Federal Communication Commission (FCC) Radiation Exposure Statement indicates power is so low that no RF exposure calculation is needed.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
