CantoUSA RETRO-PAR 2.0
Incandescent Replacement LED Engine
Energy Efficient LED Light Engine
Designed to retrofit directly into existing fixtures.
The RETRO-PAR Series is a TUV listed retrofit kit that rapidly transforms existing inefficient incandescent fixtures into energy efficient LED fixtures. Our patented technology allows the fixture to smoothly dim from 0-100% utilizing existing dimming technology. Retrofit kits are available with a variety of options for both recessed and pendant style fixtures. Installation is as easy as changing a light bulb. Our LED technology creates even fields and delivers consistent color. The RETRO series delivers more light than most incandescent bulbs it replaces with less watt load. Canto USA offers PAR38, PAR46, PAR56 and PAR 64 options as well as custom rings when needed.
10 Year LED Array Warranty
What the RETRO IS
- More cost effective than fixture replacement
- Large lumen output for this section of the market
- Listed for screw-in replacement
- Dims on existing dimming systems with no additional installation of control system
- 0-100% dimming without flicker, pulse, or stepping
- 80+ Higher CRI
Applications
- Where dimming is a key concern
- Where there is no desire or budget to replace existing fixtures
- Where access is limited
- Where a custom solution is required
- Where the ceiling cannot be disturbed
Typical Installations
- Auditoriums
- Churches and houses of worship
- Arenas
- Lobbies
- Museums
- Educational facilities
- Convention centers
- Concert halls
PAR Rings
| PAR Rings | |
|---|---|
| PAR38 Ring | |
| PAR46 Ring | |
| PAR56 Ring | |
| PAR64 Ring | |
| Adjustable Par Ring (56) (64) | |
| Custom - Include .dwg or .pdf |
Fixture Reflectors
| Fixture Reflectors | |
|---|---|
| Tall 15 Degrees | |
| Tall 23 Degrees | |
| Tall 46 Degrees | |
| Short 26 Degree | |
| Short 40 Degree | |
| Short 59 Degrees | |
| Short 70 Degrees | |
| None 120 Degrees |
Color Temp
| Color Temp | |
|---|---|
| 2700K - | |
| 3000K - Standard | |
| 3500K | |
| 4000K | |
| 5000K |
Available for the following in the RETRO Series:
RETRO-Fusion™ 2.0
- RETRO-Fusion 2.0 150 (2,000 Lumens)
- RETRO-Fusion 2.0 300 (3,000 Lumens)
- RETRO-Fusion 2.0 500 (5,000 Lumens)
- RETRO-Fusion 2.0 700 (8,000 Lumens)
- RETRO-Fusion 2.0 1000 (10,000 Lumens)
RETRO-Passive® 2.0
- RETRO-Passive 2.0 150 (2,000 Lumens)
- RETRO-Passive 2.0 300 (3,000 Lumens)
- RETRO-Passive 2.0 500 (5,000 Lumens)
- RETRO-Passive 2.0 700 (8,000 Lumens)
- RETRO-Passive 2.0 1000 (10,000 Lumens)
Order Guide
1. RETRO
| LIGHT | VOLTAGE | FIXTURE TYPE | SINK SIZE | COLOR TEMP | CRI | TOP | TYPE | LENGTH |
|---|---|---|---|---|---|---|---|---|
| 00 | 120 | F2 | X | 2.7K | 80 | TOP | PP (Par Plug)* | 12" standard unless specified |
| 00 | 230 | P2 | X | 3.0K | *90 | TOP | BW (Bare Wire) | 12" min, increase in 6" incre- ments |
| 500 | X | 3.5K | *95 | TOP | JB (JBox) | 0.00" (Flush mount) | ||
| 500 (F2 Only) | S (Short) | 3.5K | *95 | *When specifying PP (Par Plug) a top with 12" length wire will be supplied with WAGO connectors to install on the existing Par Plug wires. | ||||
| 300 | T (Tall) | 4.0K | *97 | |||||
| 150 | S (Short) | 5.0K | ||||||
| 150 |
* Chips with a CRI greater than 80 are an additional 6 weeks beyond standard delivery
3. REFLECTOR
| REFLECTOR | DEGREE | SIZE | |
|---|---|---|---|
| 00 | 15 | T | |
| 23 | T | ||
| 46 | T | ||
| 26 | S | ||
| 40 | S | ||
| 59 | S | ||
| 70 | S | ||
| ZOR (ZORYA) | 25 | S |
4. PAR RING OPTIONS
| RING SIZE | TYPE | ADJST | KIT | |
|---|---|---|---|---|
| PAR56 | *150T | ADJUSTABLE | ADJST | KIT |
| PAR64 | 3571 | KIT | ||
| PARCC | ||||
| **TRMCC |
*When using 150 Tall specify 150T otherwise use 3571
**TRMCC is used for custom trim plate
Note: PAR38 and PAR46 would be a custom ring. Please use code PARCC
Note: PAR46 cannot be used with the RETRO-Passive 300, 500, 700, or 1000
Note: PAR56 with RETRO-Passive requires inverting PAR Ring mount above heat sink
5. DIFFUSERS
| DIF | TYPE | |
|---|---|---|
| 00 | SMALL (For Shorts) | |
| LARGE (For Talls) | ||
| KIT (For Shorts and Talls) |
Please reference the specific RETRO Series informational sheet for electrical data, fixture drawings and photometrics.
