DeepCool AG620 Series
Dual Tower CPU Cooler
- AG620 ARGB
- AG620 BK ARGB
- AG620 WH ARGB
Brand: DeepCool
Installation Guide
This guide provides instructions for installing the DeepCool AG620 Series CPU Cooler on Intel and AMD platforms.
Included Components
- A: CPU Cooler Heatsink Assembly (Dual Tower)
- B: 120mm Fan (x2)
- C: Intel Backplate (for LGA1700/1200/115x)
- D: Intel Mounting Studs (for LGA1700/1200/115x) (x4)
- E: Intel Mounting Brackets (for LGA1700/1200/115x and LGA2066/2011) (x2)
- F: Intel Mounting Studs (for LGA2066/2011) (x4)
- G: AMD Mounting Brackets (x2)
- H: AMD Mounting Studs (x4)
- I: AMD Retention Clips/Brackets (x4)
- J: Fan Clips (for securing fans to heatsink) (x4)
- K: Thermal Paste Applicator/Tool (x1)
- L: Fan Power/ARGB Splitter Cable (x1)
Intel CPU Cooler Installation
For LGA1700/1200/1151/1150/1155 Sockets:
- Place the Intel backplate (C) on the rear of the motherboard, aligning it with the CPU socket mounting holes.
- Insert and screw the Intel mounting studs (D) through the backplate into the motherboard.
- Apply a small amount of thermal paste (using tool K) onto the center of the CPU.
- Carefully position the heatsink assembly (A) onto the CPU, ensuring the mounting posts align with the studs (D).
- Place the Intel mounting brackets (E) over the heatsink's mounting posts and screw them into the studs (D) to secure the heatsink. Tighten in a cross pattern for even pressure.
- Attach the fans (B) to the heatsink's fins using the provided fan clips (J).
- Connect the fan power cables to the motherboard's CPU_FAN header, potentially using the splitter cable (L).
For LGA2066/2011-v3/2011 Sockets:
- Remove the motherboard's original CPU cooler mounting brackets.
- Attach the Intel mounting brackets (E) to the motherboard, aligning them with the CPU socket mounting holes.
- Screw the Intel mounting studs (F) into the brackets (E).
- Apply thermal paste (using tool K) onto the CPU.
- Position the heatsink assembly (A) onto the CPU, aligning the mounting posts with the studs (F).
- Secure the heatsink by attaching the mounting brackets (E) to the studs (F).
- Attach the fans (B) to the heatsink using fan clips (J).
- Connect the fan power cables to the motherboard's CPU_FAN header, potentially using the splitter cable (L).
AMD CPU Cooler Installation
For AM5/AM4 Sockets:
- Remove the motherboard's stock CPU cooler mounting hardware (plastic brackets and screws).
- Attach the AMD mounting brackets (G) to the motherboard, aligning them with the CPU socket mounting holes.
- Screw the AMD mounting studs (H) into the brackets (G).
- Apply thermal paste (using tool K) onto the CPU.
- Position the heatsink assembly (A) onto the CPU, aligning the mounting posts with the studs (H).
- Secure the heatsink by attaching the AMD retention clips/brackets (I) onto the studs (H).
- Attach the fans (B) to the heatsink using fan clips (J).
- Connect the fan power cables to the motherboard's CPU_FAN header, potentially using the splitter cable (L).
Fan Connection
The included splitter cable (L) allows for connecting multiple fans (B) to a single motherboard fan header for power and PWM control. Ensure proper alignment of pins when connecting ARGB cables if applicable.
Warranty and Support
Limited Liability Warranty Summary
DeepCool provides a limited warranty against manufacturing defects for this product. The warranty covers repair or replacement of defective parts. It does not cover damage resulting from:
- Improper use, excessive use, or use outside of intended applications.
- Damage caused by natural disasters (lightning, fire, earthquake, flood, etc.), power surges, or animals.
- Unauthorized disassembly, modification, or repair.
- Removal or damage to the tamper-evident sticker.
DeepCool's liability is limited to the current market value of the product. Proof of purchase is required for warranty claims. For detailed information and support, please visit the official DeepCool website: www.deepcool.com/support.
Users are responsible for shipping costs to send defective products to DeepCool authorized dealers/agents; return shipping costs for repaired products are covered by DeepCool.
Hazardous Substance Table
This table indicates the presence of hazardous substances in product components, based on SJ/T 11364 and EU RoHS regulations.
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Heatsink | × | ○ | ○ | ○ | ○ | ○ |
| Plastic | ○ | ○ | ○ | ○ | ○ | ○ |
| Silicone | ○ | ○ | ○ | ○ | ○ | ○ |
| Integrated Circuit | × | ○ | ○ | ○ | ○ | ○ |
| Parts Bag | × | ○ | ○ | ○ | ○ | ○ |
○: Indicates the content of the hazardous substance in all homogeneous materials of this component is below the limit requirement specified in GB/T 26572.
×: Indicates the content of the hazardous substance in at least one homogeneous material of this component exceeds the limit requirement specified in GB/T 26572. However, due to limitations in technological development, there is no mature alternative solution, and it complies with the environmental requirements of the EU RoHS directive.
The environmental protection use period for this product is 10 years under normal operating temperature and humidity conditions.
