CRIVIT Inflatable Pool Goal & Hoop Set

Introduction

Congratulations on your purchase of this high-quality product. Please familiarize yourself with the product before first use by carefully reading these instructions.

Use the product only as described and for the intended applications. Store these instructions carefully. When passing the product to a third party, please also hand over all accompanying documents.

Scope of Delivery

The set includes:

• 1 x Inflatable Water Polo Goal (1)
• 1 x Net (2)
• 1 x Cord (3)
• 1 x Inflatable Basketball Hoop (4)
• 2 x Inflatable Balls (5)
• 1 x Deflation Tube
• 1 x Repair Patch
• 1 x Instructions for Use

Technical Data

Dimensions (inflated):

• Goal: Approx. 137 x 66 x 58 cm (W x H x D)
• Hoop: Approx. 59 x 49 cm (Ø x H)

Date of Manufacture: 02/2022

Declarations:

• UK Conformity Assessed (UKCA)
• CE Marking
• Conforms to Toys (Safety) Regulations 2011 and Directive 2009/48/EC on the safety of toys.

Intended Use

This product is a toy for children aged 3 years and older, intended for outdoor use. It is for private use only and not for commercial use.

Safety Instructions

☠️ Danger to Life!

• ⚠️ Not suitable for children under 36 months due to strangulation hazard from the long cord.
• ⚠️ Use only in shallow water and under adult supervision.
• ⚠️ All packaging and fastening materials are not part of the toy and must be removed for safety before giving to children.

? Risk of Injury!

• Adult assembly is required.
• ⚠️ For domestic use only.
• The product must be fully inflated before use to prevent damage and injury.
• Inform children about safe usage practices.
• Do not climb on the product.
• Do not sit on the product.
• Do not modify the product.
• Do not use if air is leaking.
• Check for damage or wear before each use. Use only in good working order.

⚠️ Avoiding Material Damage!

• Inflatables are sensitive to cold; do not unfold or inflate below 15°C.
• ⚠️ Avoid sunscreen and alcohol-based skin care products, as they can damage the PVC coating and cause color transfer.
• Do not over-inflate to prevent seam damage. Close valves properly after inflating.
• If air pressure increases in hot sun, release some air.
• Keep the product away from stones, gravel, sharp objects, and avoid rubbing or dragging to prevent damage to the foil.
• Use only correct pump adapters for safety valves to prevent damage.
• Avoid contact with sharp-edged, hot, pointed, or dangerous objects.

Assembly

Assembly should always be performed by an adult. Follow the steps in the indicated order.

Inflation Process

• Always inflate air chambers fully.
• Follow the correct sequence for inflating chambers.
• Avoid over-inflating to prevent stretching or tearing seams.
• Use standard foot pumps or double-stroke piston pumps with appropriate adapters.
• Do not use compressors or compressed air bottles, as this can damage the product.
• Ensure chambers are inflated uniformly.
• Inflate until firm to the touch; it should still yield slightly when pressed.

Inflation Order:

1. Lower air chamber of the water polo goal
2. Upper air chamber of the water polo goal
3. Air chamber for the basketball hoop
4. Balls

Inflation Steps:

1. Open the valve seal (1a) (Fig. D).
2. Squeeze the valve stem (1b) and inflate until firm.
3. Close the valve seal and gently push the valve in (Fig. D).

Water Polo Goal Assembly: Place on a firm surface and follow assembly steps in Figs. B-C.

Disassembly

Water Polo Goal: Untie the net knot and pull the net out hole by hole.

Deflation

1. Pull out and open the valve.
2. Gently squeeze the valve stem to release air, or use the deflation tube for rapid deflation.

Repairs

Minor cracks or holes can be repaired using the supplied patch. Important: Do not inflate for 20 minutes after repair. Do not use the patch on seams.

1. Completely deflate the product.
2. Clean the leak area thoroughly; it must be dry and grease-free.
3. Cut a repair patch piece large enough for edges to overlap the damaged area by approx. 1.3 cm.
4. Peel the patch from the paper, place it on the damaged area, and press firmly.

Storage and Cleaning

Store the product clean, dry, and deflated at room temperature. Ensure valves are closed. Do not place sharp objects on the product or use talcum powder during winter storage. Clean only with a damp cloth and dry afterwards. Important: Never clean with harsh cleaning agents.

Disposal

Dispose of the product and packaging according to local regulations. Keep packaging materials away from children. Dispose of products and packaging in an environmentally friendly manner. The recycling code identifies materials for recycling.

Guarantee and Service

DELTA-SPORT HANDELSKONTOR GmbH provides a three-year guarantee from the date of purchase for material and manufacturing defects. The guarantee excludes normal wear and tear, fragile parts, misuse, or failure to follow instructions. Claims require the original sales receipt. For service or claims, contact the provided service hotline or email.

Service Contact:

• Great Britain: Tel: 0800 404 7657, E-Mail: deltasport@lidl.co.uk
• Ireland: Tel: 1800 101010, E-Mail: deltasport@lidl.ie

Your legal rights are not affected by this guarantee.

Diagram Descriptions

Figure A: Components

Illustrates the main parts of the set: an inflatable water polo goal (1), a net (2), a cord (3), an inflatable basketball hoop (4), and two inflatable balls (5).

Figure B: Net Attachment

Shows the process of attaching the net (2) to the inflatable goal (1) using the cord (3).

Figure C: Net Attachment Details

Provides close-up views of the specific points where the net is secured to the goal structure.

Figure D: Valve Operation

Shows detailed steps for operating the inflation valve: opening the valve seal (1a) and squeezing the valve stem (1b) to inflate.