KEF S1 Floor Stand

Introduction

Thank you for choosing KEF S1. Please read and follow this user manual carefully before using S1.

Since 1961 KEF's mission has been to preserve the integrity of sound with as little intervention as possible; from treble to bass, and everything in between. Experience is everything, and that's no overstatement. Combining obsessions with acoustic authenticity and innovative engineering, KEF products are designed to speak for themselves.

Listen and believe

In the Box

The following components are included with your KEF S1 Floor Stand:

• 1x Vertical support column
• 1x Base plate
• 1x Top plate
• 2x Allen keys (labeled [A] and [B])
• 2x Screws (for attaching support to base)
• 4x Screws (for attaching speaker to top plate)

Diagram Description: The package contains a vertical stand column, a flat base plate, a flat top plate for mounting a speaker, two L-shaped Allen keys for tightening screws, and bags of screws.

Installation Instructions

1. Step 1: Attach Support to Base

   Place the base plate on a flat surface. Align the bottom of the vertical support column with the corresponding mounting points on the base plate. Insert two screws [B] through the base plate into the bottom of the support column. Tighten securely using the Allen key [B].

   Diagram Description: Shows the base plate with screw holes. Two screws [B] are inserted through the base plate into the bottom of the support column. An Allen key is used to tighten them.

2. Step 2: Assembled Stand

   The stand is now assembled with the vertical support attached to the base plate.

   Diagram Description: Shows the fully assembled stand structure, comprising the base and the vertical column.

3. Step 3: Mount Speaker

   Place the top plate onto the top of the vertical support column. Align the mounting holes. Insert one screw [A] through the top plate into the support column. Tighten securely using the Allen key [A]. Position your speaker onto the top plate.

   Diagram Description: Shows the top plate being attached to the top of the vertical support. One screw [A] is inserted through the top plate into the support. An Allen key is used to tighten it. A speaker is shown being placed on the top plate.

Speaker Placement on Stand

Proper placement of your speakers on the stand is crucial for optimal sound. The diagrams illustrate the top, front, and side views of a speaker mounted on the KEF S1 Floor Stand.

Diagram Description: Shows three views of a speaker mounted on the stand: Top View (speaker centered on the top plate), Front View (full stand with speaker from the front), and Side View (full stand with speaker from the side).

Specifications

Disclaimer

KEF reserves the right, in line with continuous research and development, to amend or change specifications without prior notice. Errors and omissions excepted (E&OE).

Contact and Warranty Information

For the latest KEF news and product information, please visit www.kef.com.

KEF products purchased from an authorized KEF retailer are covered by a warranty. GP Acoustics (UK) Limited and KEF's authorized distributors provide warranty with a valid proof of purchase.

This warranty is in addition to, and in no way detracts from, your statutory rights as a consumer under any applicable laws governing this warranty.

For full details, please visit: www.kef.com/support.

You can also contact the Customer Service Department:

• Phone (UK): +44 800 652 2696 (charges may apply for calls made outside of the UK)
• Email: support@kef.com
• Post: GP Acoustics (UK) Limited, Eccleston Road, Tovil, Maidstone, Kent, ME15 6QP, UK

GP Acoustics (UK) Limited
Eccleston Road
Tovil, Maidstone
Kent, ME15 6QP
UK
Phone: +44 1622 672 261

Issue Date: 03.2022