Z-Wave Protocol Implementation Conformance Statement
Wall Plug JP
General Information
- Product Identifier: FGWPA-111
- Brand Name: FIBARO
- Product Version: HW: 1 FW: 4.02:04.02
- Z-Wave Certification #: ZC10-19016342
Product Features
- Loads Controlled: 3
- Firmware Updatable: Updatable by Consumer by RF
- Supported Notification Types: Power Management System
- Electric Load Type: Incandescent, Inductive (e.g. Motor)
- Supported Meter Type: Electric Energy
- Switch Load Capacity Current: 15A for resistive and inductive loads, 8A for incandescent loads.
- Switch Load Capacity Volt-Ampere: 360
- Sensors: Power
- Color: White
Z-Wave Product Information
- Supports Z-Wave Beaming Technology?: Yes
- Supports Z-Wave Network Security?: Yes
- Supports Z-Wave AES-128 Security S0?: Yes
- Supports Security S2?: Yes: S2 Authenticated, S2 Unauthenticated
- SmartStart Compatible?: No
Z-Wave Technical Information
- Z-Wave Frequency: Japan
- Z-Wave Product ID: 0xA000
- Z-Wave Product Type: 0x1701
- Z-Wave Hardware Platform: ZM5101
- Z-Wave Development Kit Version: 6.71.01
- Z-Wave Library Type: Enhanced 232 Slave
- Z-Wave Device Type / Role Type: On/Off Power Switch / Always On Slave
Association Group Information
Group # / Max Nodes | Description |
---|---|
1 / 1 | "Lifeline" reports the device status and allows for assigning single device only (main controller by default). |
2 / 5 | "On/Off (Button)" devices in this group will be switched on or off when relay status is changed using the button (uses Basic command class). |
3 / 5 | "On/Off (Plug power)" devices in this group will be switched on or off depending on the current load of plugged device (uses Basic command class). |
Supported Command Classes (21):
- Application Status
- Association V2
- Configuration
- Device Reset Locally
- Manufacturer Specific V2
- Multi-Channel Association V3
- Powerlevel
- Security S0
- Supervision
- Transport Service V2
- Z-Wave Plus Info V2
- Association Group Information V2
- Basic
- CRC16 Encapsulation
- Firmware Update Meta-Data V4
- Meter V3
- Notification V8
- Protection V2
- Security S2
- Switch Binary
- Version V2
Controlled Command Classes (1):
- Basic
Related Documents
![]() |
Z-Wave Wall Plug US FGWPB-111 Conformance Statement Official Z-Wave Protocol Implementation Conformance Statement for the FIBARO Wall Plug US (FGWPB-111), detailing technical specifications, features, and Z-Wave network compatibility. |
![]() |
FIBARO Double Switch 2: Z-Wave Protocol Implementation Conformance Statement Detailed technical specifications and Z-Wave conformance statement for the FIBARO Double Switch 2 (FGS-223), including product features, Z-Wave information, and command class support. |
![]() |
FIBARO Wall Plug Z-Wave Conformance Statement This document outlines the Z-Wave Protocol Implementation Conformance Statement for the FIBARO Wall Plug, detailing its technical specifications, features, and Z-Wave compatibility. |
![]() |
Z-Wave Protocol Implementation Conformance Statement: Wall Plug UK This document details the Z-Wave Protocol Implementation Conformance Statement for the FIBARO Wall Plug UK, including general information, product features, Z-Wave technical information, and association group details. |
![]() |
Z-Wave Smart Implant FGBS-222 Conformance Statement This document outlines the Z-Wave Protocol Implementation Conformance Statement for the FIBARO Smart Implant (FGBS-222), detailing its general information, product features, Z-Wave specific details, and supported command classes. |
![]() |
FIBARO Flood Sensor Z-Wave Conformance Statement Official Z-Wave Protocol Implementation Conformance Statement for the FIBARO Flood Sensor (FGFS-101), detailing its features, Z-Wave compatibility, and technical specifications. |
![]() |
FIBARO Wall Plug - Z-Wave Protocol Implementation Conformance Statement Technical specifications and conformance details for the FIBARO Wall Plug (FGWPx-102), including Z-Wave features, product information, and technical specifications. |
![]() |
FIBARO Wall Outlet Z-Wave Conformance Statement Official Z-Wave Protocol Implementation Conformance Statement for the FIBARO Wall Outlet (FGWOx-011), detailing its technical specifications, product features, and Z-Wave network capabilities. |