Guardo WS-200 Digital Weather Station

Product Information

Brand: Guardo

Model: WS-200

Languages Included: English (EN), Dutch (NL), French (FR), German (DE)

Declaration of Conformity

Company: TE-Group NV

Address: Kapelsestraat 61, 2950 Kapellen, Belgium

The Guardo WS-200 Digital Weather Station conforms to the safety requirements of directives 2011/65/EU, 2015/863/EU, 2014/30/EU, 2014/35/EU, 2014/53/EU, 2009/125/EU, and 2019/1782/EU. Conformity is guaranteed by the CE symbol. The product has been tested against relevant standards and specifications including EN 62321, EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 50663:2017, ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, ETSI EN 300 220-1 V3.1.1, ETSI EN 300 220-2 V3.2.1, ETSI EN 300 330 V2.1.1, IEC 62368-1, EN 62479:2010, and EN 62368-1:2014+A11:2017.

Authorized Signature: J. Van Os, Product & Research Manager

Date: Kapellen - September 2020

Parts and Buttons

Main Unit (Illustration 1)

• 1. Indoor Temperature: Displays the current indoor temperature.
• 2. Low battery indicator (main unit): Alerts when the main unit's batteries are low.
• 3. Humidity Trends: Shows historical humidity data.
• 4. Indoor Humidity: Displays the current indoor humidity level.
• 5. Indoor comfort indicator: Provides an indication of indoor comfort levels.
• 6. Time (12/24h): Displays the current time in either 12-hour or 24-hour format.
• 7. Snooze Icon: Indicates the snooze function is active.
• 8. Alarm Icon: Indicates an alarm is set or active.
• 9. Weekday: Displays the current day of the week.
• 10. Date: Displays the current date.
• 11. Comfort Indicator for different channels: Shows comfort levels for various connected sensors.
• 12. HI/LOW Alert for Humidity: Alerts for high or low humidity readings.
• 13. Humidity Data from remote sensor: Displays humidity data from an external sensor.
• 14. Low battery indicator (remote sensor): Alerts when the remote sensor's batteries are low.
• 15. Temperature Trends: Shows historical temperature data.
• 16. Temperature Data from remote sensor: Displays temperature data from an external sensor.
• 17. Channel No. for remote sensor: Indicates the channel number of the remote sensor.
• 18. Auto scrolling icon: Shows that data from different channels is automatically scrolling.
• 19. HI/LOW Alert for Temperature: Alerts for high or low temperature readings.
• 20. Snooze / Light Button: Activates the backlight or snoozes an alarm.
• 21. Hanging Hole: For mounting the unit on a wall.
• 22. Buttons: [SET], [CHI/], [], [ALARM], [MEM], [ALERTS].
• 23. Battery Compartment Cover: Covers the battery compartment.
• 24. DC IN JACK: For connecting the power adapter.
• 25. Metal Stands: For positioning the unit upright.

Remote Sensor (Illustration 2)

• 1. LED indicator: Flashes to confirm sensor activity.
• 2. Battery compartment: Holds the batteries for the sensor.
• 3. Hanging hole: For mounting the sensor on a wall.
• 4. Channel switch: Selects the channel for the sensor (1, 2, or 3).
• 5. Rope hanging hole: For attaching a rope for hanging.

Installation

Main Unit

1. Remove the protective foil from the display.
2. Remove the battery compartment cover (23).
3. Insert 3 x AAA batteries, ensuring correct polarity (+ and -). This is optional if using the DC adapter.
4. Attach the metal stands (25) to the designated holes on the main unit.
5. Connect the power adapter to the main unit (22) and a power outlet.
6. Replace the battery compartment cover.

The main unit can be placed on a flat surface using the metal stands or hung on a wall using the hanging hole.

Remote Sensor

1. Remove the battery compartment cover and select the desired channel (1, 2, or 3) using the channel switch (4).
2. Insert 2 x AA batteries, ensuring correct polarity (+ and -). The red LED indicator (1) will flash once.
3. Replace the battery compartment cover.

The sensor can be mounted on a wall using the hanging hole (3).

Sensor Placement Recommendations:

• Mount the sensor on a north-facing wall or in a shaded area. Placement under an eave or deck rail is preferred.
• The maximum wireless transmission range is up to 50 meters in open air, without obstructions like walls or floors.
• Mount the sensor in a vertical position to allow moisture to drain properly.
• Keep the sensor out of direct sunlight and ensure it is well-ventilated.

Operation

• Upon connecting the main unit to power (or inserting batteries), it will automatically turn ON and begin detecting indoor temperature and humidity.
• To receive signals from the remote sensor, ensure both the main unit and the sensor are set to the same channel. Use the [CHI/] button on the back of the main unit to select the channel.
• Once the channels are synchronized, press and hold the [CHI/] button until a beep is heard and the 3 dashes on the display flash. The connection between the sensor and the main unit may take up to 3 minutes.

Button Functions

• [SET]: Press and hold to enter setting mode. Press to cycle through settings (language, beep, 12/24h format, time, date, °C/°F format). Press again to confirm a setting.
• [CHI/]: Use to select channels 1, 2, or 3. In setting mode, use to change values.
• []: In setting mode, use to change values.
• [MEM]: Press to view daily maximum and minimum records, Heat Index, and Dew Point.
• [ALARM]: Press and hold to enter alarm time setting mode. Press to set alarms. Press to view the 2 alarm settings.
• [SNOOZE/LIGHT]: Press to activate the backlight for 10 seconds (when powered by batteries). Press to select backlight brightness (high, low, off) when powered by adapter. Press to snooze an alarm; the alarm will sound again after 5 minutes. Press any button to stop the alarm.
• [ALERTS]: Press and hold to enter alert setting mode. Press to activate or deactivate alerts.

For detailed information on all functions and settings, please refer to the complete manual available at www.guardo.be.

Safety Instructions

• Do not dismantle or modify the product in any way.
• The main unit must be protected from rain and moisture.
• The product is not intended as a reference thermometer. Guardo is not liable for damages resulting from inaccurate readings.
• Remove batteries if the product will not be used for an extended period to prevent leakage and damage. Do not leave discharged batteries in the compartment.
• Replacing batteries will erase saved information.
• Clean the product only with a soft cloth. Avoid using benzene, thinner, or other chemical solvents.
• Never immerse the product in water.
• Do not expose the product to extreme force, shock, or significant temperature or humidity fluctuations.
• Do not mix new and old batteries, or batteries of different types.
• Dispose of this product responsibly according to local regulations for electronic waste.

Support

For more information, spare parts, technical questions, or return requests, please contact support@guardo.be.

Guarantee

Copyright © Guardo. Guardo is a registered trademark of TE-Group NV. Guardo products are warranted against defects in material and workmanship for two (2) years from the original purchase date. For guarantee conditions and details, visit www.guardo.be.

Further Information

Visit www.guardo.be for the detailed manual and additional documentation.