Miele S 401 I Vacuum Cleaner Parts Overview
Date: 04.03.2024
010 Casing bottom
This section details the bottom casing components of the Miele S 401 I vacuum cleaner. The diagram shows various parts labeled with numbers, including the main casing structure, internal mounts, and connection points. A specific part number, $3926510-010$, is associated with this assembly.
Key components visible in the diagram include:
- Main bottom casing structure (10)
- Various internal brackets and supports (e.g., 80, 90, 100, 110, 130, 140, 150, 160, 170, 180, 190, 200, 210, 220)
- Wheel assemblies and related parts (e.g., 30, 70)
- Electrical components and connectors (e.g., 105, 106)
- Filter or vent elements (120)
020 Casing top
This section illustrates the top casing of the Miele S 401 I vacuum cleaner. It includes the main lid or cover and associated internal mechanisms for securing it.
Key components visible in the diagram include:
- Top casing cover (140)
- Internal latches and locking mechanisms (e.g., 100, 120, 125)
- Mounting points and screws (e.g., 7, 11, 13)
- Small accessory or vent covers (20, 40, 50, 60)
- Hose or cable management clips (30, 90)
030 Operating unit
This section provides a detailed view of the operating unit of the Miele S 401 I vacuum cleaner, likely containing the main controls and internal electronics.
Key components visible in the diagram include:
- Main operating unit housing (10)
- Control panel and buttons (100, 110)
- Internal wiring and connectors (e.g., 1, 8, 14, 25, 27, 28)
- Circuit boards and electronic components (e.g., 150, 170, 180, 200, 210, 230, 240, 260)
- Switch mechanisms (e.g., 90)
- Cable management and strain relief parts (e.g., 50)
- Filter or air intake components (12)
- Fasteners and small brackets (e.g., 13, 17, 18)
- Cord rewind mechanism components (30, 40, 6, 7)
040 Fan
This section details the fan assembly for the Miele S 401 I vacuum cleaner, responsible for generating suction power.
Key components visible in the diagram include:
- Fan motor units (05, 10)
- Fan impellers or blades (20, 130)
- Motor housing and mounting brackets (e.g., 80, 17)
- Electrical connections and terminals (e.g., 15, 3, 2, 14)
- Air intake or filter housings (e.g., 10, 80)
- Mounting screws and fasteners (e.g., 75, 4, 9)
050 Suction hose
This section illustrates the components of the suction hose and wand assembly for the Miele S 401 I vacuum cleaner.
Key components visible in the diagram include:
- Main suction hose sections (e.g., 50, 80, 90, 100, 110, 120, 130)
- Hose connectors and adapters (e.g., 10, 30, 40, 60, 82, 84, 86, 92, 94, 96, 102, 104, 106, 112, 114, 116, 122, 124, 140, 145)
- Various floorheads and brush attachments (e.g., 150, 180, 185, 190, 195, 205)
- Brush roll components (e.g., 70, 75)
- Clips and locking mechanisms (e.g., 50, 84, 86, 92, 94, 96, 102, 104, 106, 112, 114, 116, 122, 124)
060 Floorhead Assembly 1
This section details a specific floorhead assembly for the Miele S 401 I vacuum cleaner, likely a primary cleaning head.
Key components visible in the diagram include:
- Main floorhead housing (10)
- Brush roll and internal mechanisms (e.g., 90, 95, 100, 110)
- Wheels for the floorhead (20, 6)
- Height adjustment mechanisms (e.g., 8, 100)
- Connection point for the wand/hose (5)
- Fasteners and small parts (e.g., 7, 130)
070 Floorhead Assembly 2
This section details another floorhead assembly, potentially a secondary or specialized cleaning head for the Miele S 401 I vacuum cleaner.
Key components visible in the diagram include:
- Main floorhead housing (10)
- Brush roll and internal mechanisms (e.g., 55)
- Wheels for the floorhead (20)
- Connection point for the wand/hose (3)
- Internal mounting plates and supports (e.g., 60)
- Fasteners and small parts (e.g., 10, 70, 90)
- Airflow control or adjustment levers (40)
075 Floorhead Assembly 3
This section details a third floorhead assembly for the Miele S 401 I vacuum cleaner, possibly for different floor types or specialized cleaning tasks.
Key components visible in the diagram include:
- Main floorhead housing (10)
- Brush roll and internal mechanisms (e.g., 60)
- Wheels for the floorhead (20)
- Connection point for the wand/hose (140)
- Internal mounting plates and supports (e.g., 80)
- Fasteners and small parts (e.g., 12, 50, 90, 100, 11)
- Airflow control or adjustment levers (30)
