AUDAC WXMK2 Series Universal Wall Speaker

Introduction: Universal Wall Speaker

The WXMK2 series speakers are designed for universal use, ensuring natural, high-fidelity reproduction of music and speech in various environments. They are suitable for modern residential applications, design-focused spaces, retail stores, bars, restaurants, and clubs.

These elegant and original ABS speakers house high-quality components. They are available with three woofer sizes: 3" (7.6 cm), 5 1/4" (13.3 cm), and 8" (20.3 cm). Available in black and white, they can integrate into any environment, from standard homes to sophisticated designer interiors. The included mounting bracket allows for horizontal and vertical installation and orientation. An advanced protection circuit is integrated to protect the tweeter against overload.

Precautions: For Your Safety

• Always keep these instructions for future reference. Never discard them.
• Always handle this unit with care.
• Clean only with a dry cloth.
• Heed all warnings and follow all instructions.
• Never expose this unit to rain, humidity, liquid drips, or splashes. Do not place any liquid-filled objects on this unit.
• Do not install this unit near any heat source, such as radiators or other heat-generating appliances.
• Do not place this unit in environments subject to high levels of dust, heat, humidity, or vibrations.
• This unit is designed for indoor use only. Do not use it outdoors.
• Only use options and accessories specified by the manufacturer.
• Only attach the speaker to structures that can support its weight. Ignoring this precaution may result in the speaker falling.
• Do not use any mounting method for the speaker other than the one specified. If extreme force is applied to the speaker, it may fall.
• Secure the speaker with a safety sling if it is to be mounted at height. Use only commonly accepted rigging tools and methods in the industry.
• Carefully inspect the unit after unpacking. If the carton or the unit itself is damaged, inform your dealer immediately.
• Always respect local regulations and requirements concerning the installation, suspension, and connection of this speaker, even if specifications differ in this document.
• Installation of this speaker should only be performed by qualified personnel.
• Use cables of appropriate section to connect the speaker.
• Use cables with clear color coding for polarity and respect the same polarity throughout the system.
• Only use amplifier outputs with correct voltage and impedance. Exceeding the limits could cause a fire or other malfunctions.
• Avoid explosions: Do not use the speaker near gasoline, solvents, or other combustible materials.
• Avoid electric shocks: Turn off the amplifier when connecting the speaker.
• Do not use the speaker for prolonged periods in case of sound distortion. This could cause permanent damage.

Attention – Repairs

This product contains no user-serviceable parts. Entrust all repairs to qualified after-sales service. Do not perform any repairs yourself unless you are qualified to do so.

CE Declaration of Conformity

This product complies with all essential requirements and other relevant characteristics described in the following directives: 2014/30/EU (EMC) and 2014/35/EU (LVD).

Waste Electrical and Electronic Equipment (WEEE)

The WEEE marking indicates that this product should not be disposed of with ordinary household waste at the end of its life. This regulation was created to protect both the environment and human health. This product is developed and manufactured with high-quality materials and components that can be recycled and/or reused. Please return this product to your collection point or local recycling center for electrical and electronic waste. This will ensure its environmentally friendly material recycling and help protect the environment we all live in.

Installation of the WXMK2

Step 1: Mounting the Speaker

The speaker can be mounted horizontally or vertically using the provided mounting bracket. To mount the speaker in the desired position, the mounting bracket must be detached from the speaker. To do this, loosen the knurled nuts on either side of the speaker. After this, the mounting holes should be visible.

For stable mounting, the speaker must always be fixed with two screws. The position of the mounting holes depends on the orientation (horizontal or vertical) of the installation. The bracket can then be mounted in the desired location. Always use appropriate fixing means for the mounting surface. Once the bracket is mounted in the desired location, the speaker can be attached to the bracket.

Step 2: Power Settings

On the rear of the WXMK2 series speakers, there is a recessed adjustment screw. This screw allows you to set the speaker's power/impedance to one of three impedance values for 100V operation and one value for standard low-impedance applications.

Step 3: Making Connections

A terminal block connector with a loop-through possibility is available on the rear of the speaker. Connection can be made by loosening the terminal screws, inserting the wires according to the polarity indicated below. After retightening the screws, the connector can be inserted into its counterpart on the rear of the speaker.

Respect polarity markings when connecting speaker cables.

Step 4: Enjoy the Music

Once the WX speakers are correctly installed, you have earned a break to relax and enjoy the music!

Additional Information: Technical Specifications

Notes

This section is intended for user notes.