JET JML-1014 Woodworking Lathe
Model: 708351M
Specifications: 230/50/1
Parts List
This document provides a detailed parts list for the JET JML-1014 Woodworking Lathe.
Contact Information:
WMH Tool Group AG
Bahnstrasse 24, CH-8603 Schwerzenbach
Website: www.wmhtoolgroup.ch
Email: info@wmhtoolgroup.ch
Tel: +41 (0) 1 806 47 48
Fax: +41 (0) 1 806 47 58
Document Revision: 03/02
Assembly Diagram Overview
The following diagram illustrates the assembly of the JET JML-1014 Woodworking Lathe. Each numbered part corresponds to an item in the parts list below.
Diagram Description: The diagram shows a detailed exploded view of the woodworking lathe, with various components like the headstock, tailstock, spindle, tool rest, and motor clearly labeled with reference numbers.
Parts List Details
| Index No. | Part No. | Description | Size | Qty. |
|---|---|---|---|---|
| 1 | JML-1 | Headstock | 1 | |
| 2 | JML-2 | Faceplate | 3" | 1 |
| 3 | JML-3 | Spur Center | MT2 | 1 |
| 4 | JML-4 | Spindle | 8ΤΡΙ | 1 |
| 4-1 | JML-4-1E | Adapter | M33x3.5 / 8ΤΡΙ | 1 |
| 5 | JML-5 | Key | 5×25 | 1 |
| 6 | BB-6005VV | Ball Bearing | 1 | |
| 7 | BB-6004VV | Ball Bearing | 1 | |
| 8 | JML-8 | Wave Washer | 1 | |
| 9 | JML-9 | Set Screw | 1/4-20×3/8 | 6 |
| 10 | JML-10 | Handlewheel | 1 | |
| 11 | JML-11 | Drift Rod | 1 | |
| 12 | JML-12 | Spindle Pulley Door | 1 | |
| 13 | JML-13 | Spring | 1 | |
| 14 | JML-14 | Roll Pin | 3×10 | 2 |
| 15 | JML-15 | Round Head Screw | 3/16-24×5/8 | 2 |
| 16 | JML-16 | Hex Nut | 3/16 | 1 |
| 17 | JML-17 | Hex Socket Cap Screw | 1/4-20×3/4 | 4 |
| 18 | JML-18 | Lock Washer | 1/4 | 4 |
| 19 | JML-19 | Spindle Pulley | 1 | |
| 20 | JML-20 | Belt | 1 | |
| 21 | JML-21E | Bed | 1 | |
| 22 | JML-22 | Motor Pulley Door | 1 | |
| 23 | JML-23 | Lock Knob | M8 | 1 |
| 24 | JML-24 | Pin | 1 | |
| 25 | JML-25 | Flat Washer | M8 | 1 |
| 26 | JML-26 | Spring | 1 | |
| 27 | JML-27 | Hex Cap Screw | M8×3 | 1 |
| 28 | JML-28 | Motor Pulley | 1 | |
| 29 | JML-29 | Hex Socket Cap Screw | 1/4-20×5/8 | 2 |
| 30 | JML-30 | Flat Washer | 1/4 | 2 |
| 31 | JML-31 | Lock Nut | 5/16 | 1 |
| 32 | JML-32 | Hex Cap Bolt | 5/16-18×1 | 1 |
| 33 | JML-33 | Motor Bracket | 1 | |
| 34 | JML-34 | Handle Protector | 1 | |
| 35 | JML-35E | Motor | 1 | |
| JML-35-1E | Capacitor (not shown) | 1 | ||
| JML-35-2E | Capacitor Cover (not shown) | 1 | ||
| JML-35-3 | Motor Fan Cover (not shown) | 1 | ||
| 36 | JML-36 | Flat Washer | 5/16 | 1 |
| 37 | JML-37 | Stud | 1 | |
| 38 | JML-38 | Handle | 1 | |
| 39 | JML-39 | Spring | 1 | |
| 40 | JML-40 | Stud | 1 | |
| 41 | JML-41 | Tool Rest Body | 1 | |
| 42 | JML-42 | Tool Rest | 6" | 1 |
| 43 | JML-43 | Bolt | 1 | |
| 44 | JML-44 | Clamp | 2 | |
| 45 | JML-45 | Stud | 1 | |
| 46 | JML-46 | Handle | 1 | |
| 47 | JML-47 | Spring | 1 | |
| 48 | JML-48 | Stud | 1 | |
| 49 | JML-49 | C-Ring | 2 | |
| 50 | JML-50 | Eccentric Rod | 1 | |
| 51 | JML-51 | Bushing | 1 | |
| 52 | JML-52 | Live Center Head | 1 | |
| 53 | BB-6002ZZ | Ball Bearing | 1 | |
| 54 | JML-54 | Live Center Shaft | 1 | |
| 55 | JML-55 | Tailstock Spindle | 1 | |
| 56 | JML-56 | Leadscrew | 1 | |
| 57 | JML-57 | E-Ring | 1 | |
| 58 | JML-58 | Eccentric Rod | 1 | |
| 59 | JML-59 | Stud | 1 | |
| 60 | JML-60 | Tailstock | 1 | |
| 61 | JML-61 | Handlewheel | 1 | |
| 62 | JML-62 | Handle | 1 | |
| 63 | JML-63 | C-Ring | 1 | |
| 64 | JML-64 | Bolt | 1 | |
| 65 | JML-65E | Magnetic Switch (VDE) | 1 | |
| 66 | JML-66 | Round Head Screw | 3 | |
| 67 | JML-67 | Switch Bracket | 1 | |
| 68 | JML-68E | Round Head Machine Screw | 3 | |
| 69 | JML-69 | Switch Cover | 1 | |
| 70 | JML-70E | Stain Relief Bushing | 2 | |
| 71 | JML-71 | Hex Nut | 3/16 | 2 |
| 72 | JML-72 | Cord Clamp | 2 | |
| 73 | JML-73 | Round Head Screw | 3/16-24×1 | 2 |
| 74 | JML-74 | Cord Protector | 1 | |
| 75 | JML-75 | Power Cord (VDE) | 1 | |
| 76 | JML-76 | Handle | 1 | |
| 77 | JML-77 | Spring | 1 | |
| 78 | JML-78 | Stud | 1 | |
| 79 | JML-79 | Safety Goggles | 1 | |
| 80 | JML-80 | Pad | 4 | |
| 81 | JML-81E | Ground Plate | 1 | |
| 82 | JML-82E | Hex Nut | 3/16 | 2 |
| 83 | JML-83E | Flat Washer | 3/16 | 2 |
| 84 | JML-84 | Clamp Nut | 3/8 | 2 |
Electrical Information
The lathe operates on 230V, 50/1 phase power.
Wire Colour Codes:
| Code | English | German | French |
|---|---|---|---|
| BK | black | schwarz | noir |
| WH | white | weiß | blanc |
| BU | blue | blau | bleu |
| YE | yellow | gelb | jaune |
| RD | red | rot | rouge |
| BN | brown | braun | brun |
| GY | grey | grau | gris |
| GNYE | green-yellow | grün-gelb | vert-jaune |
| OG | orange | orange | orange |
| VT | violet | violett | violet |
Symbol Meanings:
| Symbol | English Meaning | German Meaning | French Meaning |
|---|---|---|---|
| M | Motor | Motor | moteur |
| S | Switch | Schalter | interrupteur |
| C | Condenser | Kondensator | condensateur |
| E | Electronic unit | Elektronik Einheit | unité électronique |
| F | Fuse | Sicherung | fusible |
| RS | Reversing switch | Drehrichtungsschalter | commu. droite/gauche |
| CS | Centrifugal switch | Fliehkraftschalter | déclencheur centrifuge |
| OL | Overload cut-off | Überlastschutzschalter | déclencheur surcharge |
| LS | Limit switch | Positionsendschalter | micro |
Electrical Diagram Description: The diagram shows the electrical connections for the lathe, including power input (PE, L1, N), switches (S), motor (M), condenser (C), and other electronic components, with color-coded wires.
