Reolink Argus Eco Operational Instruction

Technical Support

For any technical assistance, please visit the official Reolink support site at https://support.reolink.com before returning the product. Most questions can be answered through the online support center.

What's in the Box

The package includes:

• Reolink Argus Eco (with Battery)
• Antenna
• Outdoor Security Mount (with a hook & loop strap)
• Reset Needle
• Surveillance Sign
• Mounting Hole Template
• Micro USB Cable
• Pack of Screws
• Quick Start Guide

Camera Introduction

The camera features:

• Built-in Microphone
• Status LED
• Lens
• Daylight Sensor
• Built-in PIR Sensor
• Reset Hole: Press the reset button with a pin to restore camera to factory settings.
• Power Switch
• Micro SD Card Slot: Always keep the rubber plug closed firmly.
• Speaker
• Antenna
• Micro USB Port
• Battery Status LED

Status LED Indicators:

• Red Light: WiFi connection failed
• Blue Light: WiFi connection succeeded

LED Status (Blinking/On):

• Blinking: Standby status
• On: Working status

Set up the Camera

Download and launch the Reolink App or Client software, and follow the on-screen instructions to finish initial setup.

On Smartphone: Scan the QR code to download the Reolink App (available on the App Store and Google Play).

On PC: Download the Reolink Client from https://reolink.com > Support > App & Client.

Charge the Battery

It is recommended to fully charge the battery before mounting the camera outdoors.

• Charge the battery with a power adapter.
• Charge the battery with a Reolink solar panel.

For better weatherproof performance, please always cover the USB charging port with the rubber plug after charging the battery.

Charging Indicator:

• Orange LED: Charging
• Green LED: Fully charged

Note: The solar panel is NOT included in the package. You can purchase one from Reolink's official online stores.

Install the Camera

Wall Mounting:

• Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the PIR motion sensor.
• For better motion detection performance, please install the camera angularly.
• Note: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.

Mounting Height: 2-3 Meters

PIR Detection Distance: 2-10 Meters

Steps for Wall Mounting:

1. Drill holes in accordance with a mounting hole template and screw the security mount into the wall. If mounting on a hard surface, insert plastic anchors first.
2. Screw the antenna to the camera and then install the camera to the security mount.
3. Loosen the adjusting knob on the mount and adjust the camera to the proper direction.
4. Tighten the adjustment knob to lock the camera.

Attaching the Camera to a Tree:

1. Thread the provided strap through the mounting plate.
2. Align the strap with the screw holes and fasten with the smaller screws.
3. Attach the plate to the security mount.
4. Fasten the security mount to a tree.
5. Install the camera and adjust the camera angles as instructed in step 3 of the previous installation guide.

Notes on PIR Motion Sensor

The PIR detection range can be customized to meet your specific needs. Refer to the table below for settings in Device Settings via the Reolink App.

Note: Higher sensitivity offers a longer detection distance but may lead to more false alarms. It is recommended to set the sensitivity level to “Low” or “Mid” when installing the camera outdoors.

Important Notes on Reducing False Alarms:

• Do not face the camera towards bright lights, including sunshine or bright lamps.
• Do not place the camera too close to areas with heavy traffic. Recommended distance from vehicles is 16 meters (52ft).
• Do not place the camera near outlets like air conditioner vents, humidifier outlets, or projector heat transfer vents.
• Do not install the camera in areas with strong wind.
• Do not face the camera towards a mirror.
• Keep the camera at least 1 meter away from wireless devices (e.g., WiFi routers, phones) to avoid interference.

Important Notes on Rechargeable Battery Usage

The Reolink Argus Eco is designed for recording motion events and remote live streaming when needed, not for 24/7 continuous operation. For tips on extending battery life, visit: https://support.reolink.com/hc/en-us/articles/360006991893

1. Charge the battery with a standard DC 5V/9V charger or Reolink solar panel. Do not use solar panels from other brands.
2. Charge the battery between 0°C and 45°C (32°F to 113°F). Use the battery between -20°C and 60°C (-4°F to 140°F).
3. Keep the USB charging port dry, clean, and free of debris. Cover the port with the rubber plug after charging.
4. Do not charge, use, or store the battery near ignition sources (fire, heaters).
5. Do not disassemble, cut, puncture, short-circuit the battery, or dispose of it in water, fire, microwaves, or pressure vessels.
6. If the battery emits odor, generates heat, discolors, deforms, or appears abnormal, remove it from the device or charger immediately and stop using it.
7. Dispose of used batteries according to local waste and recycling laws.

Troubleshooting

Camera Not Powering On:

• Ensure the power switch is turned on.
• Charge the battery with a DC 5V/2A power adapter until the green light is on.
• If issues persist, contact Reolink Support at https://support.reolink.com.

Failed to Scan QR Code on Phone:

• Remove the protective film from the camera lens.
• Wipe the camera lens with a dry paper/towel/tissue.
• Vary the distance between the camera and phone for better focus.
• Try scanning in sufficient lighting.
• If issues persist, contact Reolink Support at https://support.reolink.com.

WiFi Connection Failed During Initial Setup:

• Ensure you are using a 2.4GHz WiFi band (5GHz is not supported).
• Verify the WiFi password is correct.
• Move the camera closer to your router for a strong signal.
• Change your router's encryption method to WPA2-PSK/WPA-PSK.
• Change your WiFi SSID or password, ensuring the SSID is within 31 characters and the password within 64 characters. Use only standard keyboard characters for the password.
• If issues persist, contact Reolink Support at https://support.reolink.com.

Specifications

Video:

• Video Resolution: 1080p HD at 15 frames/sec
• Field of View: 100º diagonal
• Night Vision: Up to 10m (33 ft)

PIR Detection & Alerts:

• PIR Detection Distance: Adjustable/up to 10m (33 ft)
• PIR Detection Angle: 100º horizontal
• Audio Alert: Customized voice-recordable alerts
• Other Alerts: Instant email alerts and push notifications

General:

• Operating Temperature: -10°C to 55°C (14°F to 131°F)
• Weather Resistance: IP65 certified weatherproof
• Size: 71 x 186 mm
• Weight (Battery included): 320g (11.2 oz)

Notification of Compliance

FCC Compliance Statement: This device complies with Part 15 of FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received. For more information, visit: https://reolink.com/fcc-compliance-notice/.

CE Simplified EU Declaration of Conformity: Reolink declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Correct Disposal of This Product: This marking indicates that the product should not be disposed of with household waste. Recycle responsibly to promote sustainable reuse of material resources. Use return and collection systems or contact the retailer for recycling.

Limited Warranty: This product comes with a 2-year limited warranty, valid only if purchased from Reolink Official Store or an authorized reseller. Learn more: https://reolink.com/warranty-and-return/.

Note: If you are not satisfied with the product and plan to return it, reset the camera to factory default settings and remove the SD card before returning.

Terms and Privacy: Use of the product is subject to the Terms of Service and Privacy Policy at https://reolink.com.

End User License Agreement: By using the product software, you agree to the EULA terms at https://reolink.com/eula/.

ISED Radiation Exposure Statement: This equipment complies with RSS-102 radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and your body.

OPERATING FREQUENCY (maximum transmitted power): 2412MHz-2472MHz (18dBm)