Comfort-Aire Century SWP30S1A Wall Mount Air Handler - PSC Motor
Model: SWP30S1A
Type: Wall Mount Air Handler, PSC Motor
Brand: Comfort-Aire / Century
Overview
This document provides a detailed parts list for the Comfort-Aire Century SWP30S1A Wall Mount Air Handler, which features a PSC (Permanent Split Capacitor) motor.
An exploded view diagram illustrates the assembly of various components, including the main chassis, side panels, evaporator assembly, fan, motor, control boards, and ductwork, showing their relative positions. A close-up photograph highlights the internal electrical components, specifically the indoor unit main control board (EX_ID 18.2), the electric installation board (EX_ID 18.1), and associated terminals (EX_ID 18).
Parts List
| EX ID | Spare Parts Code | Part Name(EN) | Qty. |
|---|---|---|---|
| 1 | 12223000002376 | Chassis Assembly | 1 |
| 1.1 | 12223000002362 | Base ass'y | 1 |
| 1.2 | 12223000006387 | Support Bar | 2 |
| 2 | 12223000010532 | Side Panel Assembly | 1 |
| 3 | 12223000010530 | Evaporator Connecting Plate Assembly | 1 |
| 4 | 12223000002182 | Support Bar Assembly | 1 |
| 5 | 12223000017736 | Side panel assembly | 1 |
| 6 | 12223000017735 | Side panel assembly | 1 |
| 7 | 12223000004067 | Air Duct Assembly | 1 |
| 7.1 | 12223000002411 | Fixing board | 1 |
| 7.2 | 12223000002239 | Left board | 1 |
| 7.3 | 12223000002242 | Right board | 1 |
| 7.4 | 12223000002006 | Side board | 2 |
| 7.5 | 12223000002246 | Duct under the baffle | 1 |
| 7.6 | 12223000002111 | Blockoff Plate | 1 |
| 7.7 | 12223000002413 | Support board | 1 |
| 8 | 12123000001081 | Drain Pan Assembly | 1 |
| 8.1 | 15500402000023 | Seal Plug | 1 |
| 9 | 12223000002113 | Mounting Plate | 1 |
| 10 | 15823000007284 | Evaporator assembly | 1 |
| 10.1 | 15823000A04001 | Evaporator | 1 |
| 10.2 | 12223000005758 | Evaporator windshield plate ass'y | 1 |
| 10.3 | 15223000000130 | Evaporator output pipe assembly | 1 |
| 10.4 | 15223000A00002 | Distributary ass'y | 1 |
| 10.5 | 15423000006001 | Evaporator input pipe assembly | 1 |
| 10.6 | 12100901000010 | Seal Ring | 1 |
| 10.7 | 15500220000008 | Valve Plug | 1 |
| 11 | 12223000010531 | Evaporator Connecting Plate Assembly | 1 |
| 12 | 12223000010534 | Evaporator Connecting Plate Assembly | 1 |
| 13 | 12200102000003 | Centrifuge Fan | 1 |
| 14 | 11002012044888 | Single Phase Asynchronous Motor | 1 |
| 15 | 12223000001992 | Motor Holder | 1 |
| 16 | 12223000001932 | Motor Holder Assembly | 3 |
| 17 | 11201708000008 | Terminal | 1 |
| 18 | 17223000010926 | E-part box ass'y | 1 |
| 18.1 | 12223000005779 | Electric installation board | 1 |
| 18.2 | 17123000012042 | Indoor unit main control board | 1 |
| 19 | 17223000010923 | Refrigerant Sensor | 1 |
| 19.1 | 12223000017718 | Fixing board | 1 |
| 19.2 | 11201003000424 | Gas sensor | 1 |
| 20 | 17400103000151 | Compressor Capacitor | 1 |
| 21 | 12223000002177 | Clamp | 1 |
| 22 | 11203103002859 | Linear Transformer | 1 |
Important Information & Disclaimers
Due to ongoing product improvements, specifications and dimensions are subject to change and correction without notice or incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer. Additionally, the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Incentive and rebate programs have precise requirements as to product performance and certification. All products meet applicable regulations in effect on date of manufacture; however, certifications are not necessarily granted for the life of a product. Therefore, it is the responsibility of the applicant to determine whether a specific model qualifies for these incentive/rebate programs.
MARS
