AMIR Refrigerator Thermometer User Manual

General Description

This document provides instructions for the AMIR Refrigerator Thermometer, a device designed to monitor temperature in refrigerators, freezers, and other environments. It features wireless connectivity, an audible alarm, and clear display of current, maximum, and minimum temperatures.

Device Overview

[Diagram of the thermometer unit showing display and buttons]

Key Components:

1. Display Screen
2. MAX/MIN Button
3. MODE Button
4. CLEAR Button
5. Battery Compartment
6. Stand/Hook
7. Sensor Probe

[Diagram of the wireless sensor unit]

Sensor Components:

1. Sensor Probe
2. Battery Compartment
3. Transmission Indicator Light

Features

Dual display for refrigerator and freezer temperatures.
Wireless transmission of temperature data.
Audible alarm for high and low temperature deviations.
Records maximum and minimum temperatures.
Selectable °C/°F units.
Low battery indicator.
Suitable for refrigerators, freezers, and general indoor/outdoor use.

Setup and Operation

Install Batteries: Open the battery compartment on the main unit and the sensor unit. Insert the appropriate batteries (not included), observing polarity.
Pairing (if applicable): The sensor and main unit should automatically pair. If not, refer to specific pairing instructions if provided.
Placement: Place the main unit outside the refrigerator/freezer and the sensor unit inside. Ensure the sensor probe is positioned to accurately measure the desired temperature.
Understanding the Display:
- Refrigerator Temperature: Displays the temperature detected by the sensor inside the refrigerator/freezer.
- Freezer Temperature: Displays the temperature detected by the sensor inside the refrigerator/freezer.
- MAX: Indicates the maximum recorded temperature since the last clear.
- MIN: Indicates the minimum recorded temperature since the last clear.
- ALARM Icon: Appears when the temperature exceeds the set high or low alarm limits.
- °C/°F: Indicates the selected temperature unit.
Setting Alarm Limits:
- Press and hold the MODE button to enter alarm setting mode.
- Use the MAX/MIN button to adjust the high alarm limit.
- Press MODE again to set the low alarm limit.
- Use the MAX/MIN button to adjust the low alarm limit.
- Press MODE to confirm and exit.
Clearing MAX/MIN Records: Press and hold the CLEAR button to reset the maximum and minimum temperature records.
Switching Units (°C/°F): Press the MODE button briefly to toggle between Celsius and Fahrenheit.

Specifications

Main Unit:

Temperature Range: -50°C to 70°C (-58°F to 158°F)
Accuracy: ±1°C (±2°F)
Resolution: 0.1°C (0.2°F)
Power: 2 x AAA batteries (not included)
Dimensions: [Specify dimensions if available]

Wireless Sensor:

Temperature Range: -50°C to 70°C (-58°F to 158°F)
Transmission Frequency: [Specify frequency if available, e.g., 433 MHz]
Transmission Range: Up to 100 meters (330 feet) in open space
Power: 2 x AAA batteries (not included)
Dimensions: [Specify dimensions if available]

Troubleshooting

No Display: Ensure batteries are correctly installed and are not depleted.
Inaccurate Readings: Allow the unit to acclimate to the environment for at least 30 minutes. Ensure the sensor probe is correctly placed and not in direct contact with cooling elements.
Wireless Signal Issues: Check battery levels in both units. Ensure the units are within the specified transmission range and minimize obstructions.
Alarm Not Sounding: Verify that alarm limits are set correctly and that the alarm function is enabled.

Care and Maintenance

Clean the units with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
Replace batteries when the low battery indicator appears.
Store in a cool, dry place when not in use.

Warranty Information

This product is covered by a limited warranty. Please refer to the warranty card or the manufacturer's website for details.

Contact Information

For customer support or inquiries, please visit the AMIR website or contact their authorized service center.