EXTOL PREMIUM 8888100

Introduction

Dear customer, thank you for the confidence you have shown in the Extol® brand by purchasing this product. This product has been tested for reliability, safety and quality according to the prescribed norms and regulations of the European Union.

Contact our customer and consulting centre for any questions at: www.extol.eu

Manufacturer: Madal Bal a. s.

Address: Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic

Date of issue: 7. 3. 2024

Assembly Instructions

The product is supplied partially assembled.

Step 1: Assemble the Stand

Assemble the stand as shown in Figure 1. [Diagram showing the base frame of the stand and how it connects to a table.]

Screw the base plate to the table. Wood screws are not included as accessories.

Step 2: Attach the Angle Grinder to the Stand

Attach the angle grinder to the stand in the following sequence as shown in Figure 2. [Diagram illustrating the process of mounting an angle grinder onto the stand, showing holder adjustments and bolt placement.]

1. Adjust the span of the holders based on the thickness of the angle grinder body.
2. Based on the size of the holes in the angle grinder, select the appropriate diameter of the included bolts. Bolt the angle grinder to the stand's holders, ensuring the nut is positioned under the bolt head. Bolts M6 and M8 require plastic spacers (see Figure 3). [Close-up diagram detailing the use of M6/M8 bolts with plastic spacers to secure the angle grinder.]
3. Using the bolts in the stand's arm, adjust the angle of the angle grinder relative to the baseplate so that the grinder disc forms a right angle with the baseplate.
4. Turn the angle adjustment mechanism to set the desired cutting angle.

Step 3: Final Check

Before starting work, ensure the angle grinder and the workpiece are firmly secured in place.