Milwaukee M12 PCG Cordless Caulk Gun

This manual provides operating instructions and safety information for the Milwaukee M12 PCG cordless caulk gun.

Technical Data

Feed Force: 1780 N

Battery Voltage: 12 V

Weight (according to EPTA-Procedure 01/2003): 1.86 kg (2.0 Ah), 2.09 kg (4.0 Ah)

Noise/Vibration Information

Measured values determined according to EN 60745.

Sound Pressure Level (K = 3 dB(A)): 54.5 dB(A)

Sound Power Level (K = 3 dB(A)): 65.5 dB(A)

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined according to EN 60745:

Vibration emission value ah: < 2.5 m/s²

Uncertainty K: 1.5 m/s²

WARNING

The vibration emission level in this information sheet has been measured in accordance with a standardized test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the product. However if the product is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the product is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the product and the accessories, keep the hands warm, organisation of work patterns.

Safety Warnings

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid, wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.

Specified Conditions of Use

The caulking gun is intended to apply tube or sausage pack caulks and adhesives to surfaces. In case of doubt, please read the caulk or adhesive manufacturer's instructions.

Do not use this product in any other way as stated for normal use.

Batteries

Battery packs which have not been used for some time should be recharged before use.

Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).

The contacts of chargers and battery packs must be kept clean.

For an optimum life-time, the battery pack must be fully charged when used up. To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged.

For battery pack storage longer than 30 days:

Battery Pack Protection LI-ION Battery

The battery pack has overload protection that protects it from being overloaded and helps to ensure long life.

Under extreme stress the battery electronics switch off the machine automatically. To restart, switch the machine off and then on again. If the machine does not start up again, the battery pack may have discharged completely. In this case it must be recharged in the battery charger.

Advice for Operation

Anti-Drip and Rod Release

The caulk gun has an automatic anti-drip feature to prevent drips after the trigger is released. When the trigger is released, the motor will run for a short time to release the rod.

When a tube is emptied, the motor will run for a short time to release the rod, then shut off. Release the trigger and change the tube.

Overload

When an overload occurs, the tool will reach the maximum drive force and continue to hold this maximum force until the user releases the trigger. If material is not dispensing, make sure that:

Maintenance

CAUTION! Carriage and rod must remain clean and free of caulk and adhesive materials. Clean off materials according to caulk/adhesive manufacturer's recommendations.

Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents.

If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the ten-digit No. on the label and order the drawing at your local service agents.

Symbols

Models: M12 PCG Compact Caulk Gun with 310ml Cartridge Holder, M12 PCG, Compact Caulk Gun with 310ml Cartridge Holder, Cartridge Holder, Holder

File Info : application/pdf, 32 Pages, 2.87MB

PDF preview unavailable. Download the PDF instead.

M12-PCG-961011673-01B-Manual-ASIA-D3 GPL Ghostscript 9.52

Related Documents

Preview Milwaukee M18 GG Cordless Grease Gun - User Manual and Operation Guide
Comprehensive user manual and operation guide for the Milwaukee M18 GG cordless grease gun. Includes technical data, safety instructions, operating procedures, maintenance, troubleshooting, and battery information.
Preview Milwaukee M18 AFG2 Cordless Fan User Manual and Safety Guide
Comprehensive user manual and safety guide for the Milwaukee M18 AFG2 cordless fan. Includes technical specifications, operating instructions, battery safety, transport guidelines, and important safety warnings.
Preview Milwaukee M12 FUEL FID2 Cordless Impact Wrench User Manual
Comprehensive user manual for the Milwaukee M12 FUEL FID2 cordless impact wrench, covering safety instructions, operation, maintenance, and technical specifications.
Preview Milwaukee M18 GG Grease Gun User Manual
Comprehensive user manual for the Milwaukee M18 GG Grease Gun, covering technical specifications, safety instructions, operating procedures, maintenance, and troubleshooting.
Preview Milwaukee 2446-20 M12 Cordless Grease Gun: Adding Self-Locking Retaining Ring (Product Support Bulletin #517)
Product support bulletin from Milwaukee Electric Tool Corporation detailing the addition of the 44-86-1400 self-locking retaining ring to the plunger rod assembly of the 2446-20 M12 Cordless Grease Gun, including installation steps.
Preview Milwaukee M12 CD Cordless Screwdriver User Manual
This manual provides original instructions for the Milwaukee M12 CD cordless screwdriver, covering safety warnings, operating instructions, technical data, and maintenance.
Preview Milwaukee M12 FDD2 & M12 FPD2 Cordless Drill Driver & Percussion Drill User Manual
Comprehensive user manual and technical specifications for Milwaukee M12 FDD2 Cordless Drill Driver and M12 FPD2 Cordless Percussion Drill/Driver, covering operation, safety, and maintenance.
Preview Milwaukee M12 23GA Pin Nailer Operator's Manual
Comprehensive operator's manual for the Milwaukee M12 23GA Pin Nailer (Model 2540-20). Contains essential safety warnings, operating instructions, assembly procedures, maintenance guidelines, and warranty information for safe and effective use.