Milwaukee M18 AFG2 Cordless Fan

Technical Data

Safety Warnings

General Warnings

⚠️ WARNING! Read all safety warnings, instructions, illustrations and specifications. Failure to follow instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

This appliance can be used by children aged 8+ and persons with reduced capabilities if supervised and instructed. Children shall not play with the appliance. Cleaning and user maintenance by children requires supervision. Use only the provided AC cable. Do not use near open flames or ashes. Do not use in potentially explosive atmospheres or where flammable materials/gases are present. Do not leave the appliance unsupervised when switched on. Do not use outdoors in the rain. Never block air grille or impeller. Do not operate without or with a defective fan grille. Use only in well-ventilated areas. Do not wear loose clothing or jewelry; keep hair, clothing, and gloves away from moving parts.

Battery Safety

Do not dispose of used battery packs in household refuse or by burning. Contact Milwaukee distributors for recycling options. Do not store battery packs with metal objects (risk of short circuit). Use only compatible Milwaukee chargers from the same battery platform. Battery acid may leak from damaged batteries. Wash affected skin immediately with soap and water. If in eyes, rinse thoroughly for at least 10 minutes and seek medical attention. ⚠️ Warning: To reduce risk of fire, injury, or product damage from short circuit, never immerse tool, battery pack, or charger in fluid. Corrosive or conductive fluids can cause short circuits.

Li-Ion Battery Protection

In cases of high current draw (high torque, stalling, short circuit), the tool will vibrate, the fuel gauge will flash, and the tool will turn OFF. Release trigger to reset. Under extreme circumstances, if the battery pack overheats, the fuel gauge will flash until it cools down. Work may resume once lights go off.

Li-Ion Battery Transport

Lithium-ion batteries are subject to Dangerous Goods Legislation. Transport must comply with local, national, and international regulations. Consumers can transport batteries by road without further requirements. Commercial transport is subject to Dangerous Goods regulations and requires trained personnel. When transporting: Ensure battery terminals are protected and insulated. Secure battery pack against movement. Do not transport cracked or leaking batteries. Consult forwarding company for advice.

Operating Instructions

Mains Connection

The device can also be operated using the supplied power cord. The battery will not be charged. When the supply cord is plugged into the fan, the fan will automatically run on AC power. Connect only to single-phase AC system voltage as indicated on the rating plate. Always disconnect the plug from the socket after use. Before doing any work on the device, pull the plug out of the socket. Make sure the machine is switched off before plugging in. Check machine, cable, and plug for damages or material fatigue before use. Repairs should only be carried out by authorized Service Agents. Keep mains lead clear from working range of the machine. Always lead the cable away behind you.

Cleaning

Dust or wipe the grille with mild soap. Do not place the grille in a dishwasher. Wipe blades with a damp cloth. Do not remove blades. Use mild soap or household cleaner for greasy environments. Do not use solvents. Always reinstall the front grille before use.

Maintenance

If the supply cord needs replacement, it must be done by the manufacturer or their agent. Use only Milwaukee accessories and spare parts. Contact a Milwaukee service agent for parts not described. Exploded views can be ordered from Milwaukee service agents or Techtronic Industries GmbH.

Fan Operation

To start the fan, turn the speed control knob. To stop, turn the knob to the OFF position. The fan head can be tilted up to 300° for directional airflow.

Packout™ Compatibility

The fan can be securely attached to Milwaukee PACKOUT™ components for integrated storage and transport. Follow the depicted steps (1, 2, 3) for attachment and detachment.

Mounting (Optional)

The fan can be mounted to a wall using appropriate hardware (not included). Follow the depicted steps (1, 2, 3) for mounting. Ensure the mounting surface is suitable and secure.

Symbols

• ⚠️ CAUTION! WARNING! DANGER! Read instructions before use.
• ⚡ Remove battery pack before working on the machine.
• ? Suitable for indoor use only. Do not expose to rain.
• ⛑️ Class II tool.
• ?️ Suitable for tropical climates up to 40°C ambient temperature.
• ♻️ Do not dispose of waste batteries or electronic equipment with household waste. Collect separately. Remove batteries, accumulators, and light sources before disposal. Consult local authorities or retailers for recycling information.
• ⚡ No-load speed
• V Voltage
• --- Direct Current
• CE European Conformity Mark
• UK UK Conformity Mark
• CA Ukraine Conformity Mark
• 001 EurAsian Conformity Mark
• EAC EurAsian Conformity Mark