UK DECLARATION OF CONFORMITY
Issued: 21/08/2025
Object of the Declaration
The object of the declaration described below is in conformity with the relevant statutory requirements:
- SI 2017 No. 1206 The Radio Equipment Regulations 2017
- SI 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- SI 2023 No. 1007 The Product Security and Telecommunications Infrastructure Regulations 2023; Applicable security requirements in Schedule 1 with a defined support period until 03 September, 2027
Referenced Standards
The following standards have been applied:
- 3GPP TS 36.521-4:v18.2.0: Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception. Part 4: Satellite access Radio Frequency (RF) and performance Conformance Testing.
- EN 300 328:v2.2.2: Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wideband modulation techniques
- EN 300 330:v2.1.1: Short-Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz
- EN 301 489-1:v2.2.3: Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
- EN 301 489-3:v2.3.2: Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz
- EN 301 489-17:v3.3.1: Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: specific conditions for Broadband Data Transmission Systems
- EN 301 489-19:v2.2.1: Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1.5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation and timing data
- EN 301 489-20:v2.2.1: Electromagnetic compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations used in Mobile Satellite Services
- EN 301 489-52:v1.3.1: Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment
- EN 301 908-1:v15.2.1: IMT cellular networks; Part 1: Introduction and common requirements
- EN 301 908-13:v13.2.1: IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)
- EN 303 413:v1.2.1: Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands
- EN 13319:2000: Diving accessories - Depth gauges and combined depth and time-measuring devices
- EN 18031-1:2024: Common security requirements for radio equipment - Part 1: Internet connected radio equipment
- EN 18031-2:2024: Common security requirements for radio equipment - Part 2: radio equipment processing data, namely Internet-connected radio equipment, childcare radio equipment, toy radio equipment and wearable radio equipment
- EN 18031-3:2024: Common security requirements for radio equipment - Part 3: Internet-connected radio equipment processing virtual money or monetary value
- EN 50360:2017/A1:2023: Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear
- EN 50566:2017/A1:2023: Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz – 6 GHz)
- EN 50663:2017: Generic standard for assessment of low-power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz – 300 GHz)
- EN 50665:2017: Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz)
- EN 55032:2015+A11:2020: Electromagnetic compatibility of multimedia equipment - Emission requirements
- EN 55035:2017/A11:2020: Electromagnetic compatibility of multimedia equipment - Immunity requirements
- EN 62368-1:2014/AC2015: Audio/Video, Information and Communications Technology Equipment - Safety requirements
- EN 62471:2008: Photobiological safety of lamps and lamp systems
Type Examination Certification
Type Examination Certification (TEC): The Notified Body Timco Engineering Inc (Approved Body Number:1177) has issued this UK-Type Examination Certificate in accordance with Schedule 3, Module B. The product described appears to be in conformity with the essential requirements Regulation 6.2 of RER 2017 (SI 2017/1206 Regulation 6.2 of RER 2017/1206. UK-Type Examination Certificate: U1177-252981
Manufacturer Information
GARMIN International
Manufacturer's Address:
1200 E 151st Street
Olathe, KS 66062
U.S.A
GARMIN Corporation
No.68, Zhangshu 2nd Rd.,
Xizhi Dist., New Taipei City 221,
TAIWAN, R.O.C.
Authorised Representative
GARMIN (Europe) Ltd. Liberty House
Hounsdown Business Park, Southampton,
Hampshire, SO40 9LR, U.K.
Declaration Statement
Type of Equipment: Information Technology Equipment (Sports Watch)
Model Numbers: A04807, fēnix 8 Pro – 47mm
The undersigned does hereby declare that the equipment complies with the above Directives and Standards.
Signed for and on behalf of: GARMIN (Europe) Ltd.
Place: Hampshire, UK Date: 21/08/2025
Name: Jamie Wiltshire Function: Quality Associate Signature: JSwuy