Tern Clubhouse Installation and User Guide

What's Included

Child Seat Expansion Bar: A long metal bar with mounting holes.
Flat Bar x 2: Two flat metal bars.
Clubhouse Frame x 2: Two identical curved metal frame pieces, each with multiple mounting holes.
M5 Bolt Set: A collection of small bolts and nuts (M5 x 16 Bolt with Washer x 8, M5 Dome Nut x 8).
M6 Bolt Set: A collection of larger bolts, washers, and nylon nuts (M6 x 25 Flat Head Bolt x 4, M6 Washer x 4, M6 Nylon Nut x 4).

Diagram Description: Visuals show the individual components included in the package, with labels and quantities.

Installation

Tools Required (Not Included)

4 mm Allen Wrench with Ball End: A hexagonal wrench with a rounded tip for easier access.
8 mm and 10 mm Open-End Wrench: Two wrenches with open ends for tightening nuts.

How to Assemble

To assemble the Clubhouse, follow these steps:

Diagram Description: The assembly process is illustrated. It shows the connection of frame parts using bolts and nuts.

Recommendation: Add anti-seize lubricant to the tip of the bolts before securing the nuts. If anti-seize lubricant is not available, apply any standard lubricant to reduce friction and prevent thread galling.

Torque Specification: Tighten Bolts to a torque of 4 Nm - 5 Nm.

Diagram Description: Visuals show the M5 bolt set and the process of tightening bolts with a wrench and Allen key, indicating the torque range.

Installation on GSD Gen 1 or Gen 2

Diagram Description: This section illustrates the installation of the Clubhouse onto the Tern GSD bicycle frame. It shows the required tools (10 mm and 4 mm wrenches) and the M6 bolt set being used.

Torque Specification: Tighten Bolts to a torque of 9 Nm - 10 Nm.

Transporting One or Two Children

Clubhouse Backrest and Clubhouse Seat Pad are sold separately.

Scenario 1: To use with a child seat or 2 Clubhouse Seat Pads and 1 Clubhouse Backrest, fasten the Clubhouse with the Flat Bar to the rear mount holes.

Diagram Description: This illustration shows the Clubhouse attached to the rear of the bicycle using the Flat Bar, configured for carrying a child seat or two seat pads and a backrest.

Scenario 2: To use with 2 child seats or 1 Clubhouse Seat Pad and 1 child seat, fasten the Clubhouse with the Expansion Bar to the front mount holes for adequate heel clearance.

Diagram Description: This illustration shows the Clubhouse attached to the front of the bicycle using the Expansion Bar, configured for carrying two child seats, with ample space shown for the rider's heels.

Important Note: Clubhouse only supports vertical parking when Flat Bar is used. Child Seat Expansion Bar will interfere with vertical parking.

Disclaimer: The Clubhouse is not intended to provide protection in the event of an accident or if the bike falls over. It is solely intended to keep passengers or cargo centered while riding.

Carrying Cargo

Diagram Description: A visual shows a bicycle equipped with the Clubhouse carrying cargo on the rear.

Installing a Bottle Cage or Lock

Diagram Description: A visual shows a bottle cage being attached to the bicycle frame.

Torque Specification: Tighten Bolts to a torque of 4 Nm - 5 Nm.

Additional Accessories (Sold Separately)

Storm Box: A large cargo container designed to fit the Clubhouse.
Storm Shield: A protective enclosure for the cargo area.
Clubhouse Seat Pad: A cushioned seat for passenger comfort.
Clubhouse Backrest: A supportive backrest for passengers.

Diagram Description: Images display the various optional accessories available for the Tern Clubhouse.

For more information and to download the latest manual, visit: https://www.ternbicycles.com/en/support

Carrying Rear Passengers

To safely transport rear passengers, please check the following points and ensure your bike is equipped with the proper accessories.

Check Local Regulations

It may be illegal to carry passengers on a bike in your area even if it has been designed or configured to do so. Check your local regulations before carrying passengers.

Check Max Gross Vehicle Weight Limits

Please follow and check your bike's manual for information about maximum gross vehicle weight. (Maximum gross vehicle weight is the total weight of the bike, rider, passenger, accessories, and cargo.) Most riders can comfortably carry 80% of their weight. You should determine if you are comfortable carrying that much weight.

Wear a Helmet

Rider and rear passenger(s) are strongly advised to wear an approved helmet.

Do NOT Leave Children Unattended

Do not allow your children to climb onto the bike nor leave your children unattended on the bike, even if it is on the kickstand. Wriggling children can upset the balance of the bike and a fall may result in serious injuries.

Use Proper Equipment

The bike needs to have the following accessories installed in order to safely transport rear passenger(s):

Seating: Purpose-built rear seating, chosen according to the passenger's needs.
Handhold: Something for the passenger to hold on to, other than the bike itself.
Foot support: Fixed platforms or dedicated foot pegs on both sides of the bike.
Foot and leg protection: Something to prevent feet and legs from getting caught in the spinning wheel.

Diagram Description: Illustrations show a bicycle equipped with suggested gear for safely carrying passengers, including seating, handholds, and footrests. The combination of accessories may differ based on needs.

To learn more about safely carrying passengers on your bike, visit https://www.ternbicycles.com/support.

Follow Installation Procedures

Check to ensure accessories have been correctly installed and securely fastened before riding.

Use Accessories Properly

Our seating accessories are strictly for sitting. Using them to lift the bike will damage the frame and accessory.
Our rear handhold accessories are strictly for passengers to hold. Adding substantial weight on the top of or using the rear passenger handlebars to lift the bike will cause undue stress on the seatpost and handlebar.
Our foot support accessories are strictly for passenger use when SEATED. Standing on them is unsafe and may permanently damage the frame.

Product Information and Warranty

Limited Product Warranty Information

This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced. Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.

Tern, the Tern Werd (logotype), the Tern Berd (device), GSD and Clubhouse used alone or in combination are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd.

Follow Tern on social media: @ternbicycles
Visit our website: ternbicycles.com