LUME-01 RGB Flexible Fixtures - Q-CAP
Q-Tran's LUME-01 RGB is a fully encapsulated flexible LED fixture designed for accentuating architectural details with up/down bending capabilities, creating eye-catching lines of light for both interior and exterior applications. It features a 6-inch bending radius, a 150° beam angle for a 3D glow, and compatibility with various mounting hardware.
Product Overview
The LUME-01 RGB offers a unique up/down bend design, allowing for creative illumination. It is suitable for accentuating architectural details and creating flexible, eye-catching lines of light. The fixture boasts a 150° beam angle, providing a 3D glow with a retro aesthetic. It is compatible with different mounting hardware to suit various design needs.
Specifications
1. Product & Dimensions
Product Name: LUME-01-RGB
Profile (Standard): 0.53" height, 0.72" width.
Bend Radius: Features an up/down bend with a 6" bending radius.
2. Mounting Options
- WSC (White Snug Clip): For indirect uplight. Comes with a #6x5/8" flat screw.
- MC (Magnetic Clip): For cove use. Comes with a #6x5/8" flat screw.
- PPS-LP-CL-2: Low profile PC Mounting Clip (Clear finish). Comes with a #8" flat screw.
- PPS-LP-CL-96: Low profile PC channel for 96" straight linear run (Clear finish). Comes with a #8" flat screw.
- PPS-LP-CL-FT: Low profile PC channel for custom lengths (Clear finish). Comes with a #8" flat screw.
3. Rating
- DRY: IP20
- WET: IP67
4. CCT
RGB
5. Wattage
6.0W/FT (Total Load)
Delivered Lumens (Calculated L70 = 40000 hrs):
| Color | LM | Wavelength | Wattage |
|---|---|---|---|
| Red | 43 | 632 | 2.4 |
| Green | 109 | 522 | 1.9 |
| Blue | 29 | 469 | 1.7 |
| All | 169 | 6.0 | 6.0 |
6. Lens
ENC/TL: Encapsulated in Translucent material.
7. Wire Input/Output
- S1 (Single): Input only - End Feed.
- P1 (Pass Through): Input/Output - End Feed.
Configuration Options:
- Non-Continuous End Feed
- Continuous End to End Feed
- No dim spot, clear end caps
8 & 9. Connector/Wire – In/Out
Connector/Wire In or Out is not needed to specify the product. Typical selections are S1 for Wire Input/Output, BW for Connector/Wire In, and N/A for Connector/Wire Out.
- BW (Bare Wire): Standard 24" length, 24 AWG.
- CON6/CON24: 6" or 24" Overall Wire Connector, IP67 Rated, UL Listed.
10. End Caps (No Feed)
- TL (Translucent): Adds 0.0" at the end.
11. Length - Wiring Detail
Available in 2" increments from 12" to 191". Fixture tolerance is +0 - 1/8". Consult factory for lengths under 12".
12. Exact/Optimal Fixture Length
Exact fixtures are the length specified. Optimal fixtures' length is rounded down with illumination end to end.
RGB Lengths by Inch:
| Requested Length | Potential dim spot on either end of fixture | Optimal Nominal Length (S1) | Optimal Nominal Length (P1) |
|---|---|---|---|
| 12" | 1" | 10.625" | 11" |
| 13" | 0.5" | 12.625" | 13" |
| 14" | 1" | 12.625" | 13" |
| 15" | 0.5" | 14.625" | 15" |
| 16" | 1" | 14.625" | 15" |
| 17" | 0.5" | 16.625" | 17" |
| 18" | 1" | 16.625" | 17" |
| 19" | 0.5" | 18.625" | 19" |
| 20" | 1" | 18.625" | 19" |
| 21" | 0.5" | 20.625" | 21" |
| 22" | 1" | 20.625" | 21" |
| 23" | 0.5" | 22.625" | 23" |
| 24" | 1" | 22.625" | 23" |
| 36" | 1" | 34.625" | 35" |
| 48" | 1" | 46.625" | 47" |
| 60" | 1" | 58.625" | 59" |
| 72" | 1" | 70.625" | 71" |
| 84" | 1" | 82.625" | 83" |
| 96" | 1" | 94.625" | 95" |
Compatible Power Supplies
Data subject to change, all data has +/- 5% tolerance.
Indoor
| Dimming Protocol | RGB | DALI-2: DT8 | SCENE App Dimmed |
|---|---|---|---|
| RGB | QTM-eLED+DMX, QZ-DMX | QTM-eLED+DALI-DT8 | Non-Dim Power Supply with RGB App Dongle |
Outdoor
| Dimming Protocol | RGB |
|---|---|
| RGB | Q-SET-QZ-DMX, QOM-eLED+DMX, QZ-DMX |
| DALI-2: DT8 | QOM-eLED+DALI-DT8 |
Compatible Mounting Accessories
- Q-ANGLE: Adjustable mounting accessory.
- SCENE APP DONGLE: Wi-Fi or Bluetooth connectivity.
- CON-EXT: 10ft Con cable extender.
- CON FOUR-FER: Splits lead from one to four LED connectors.
LED Lighting Systems, Linear LED Lights, LED transformers | QTL formerly Q-Tran
