Instructions for use of the Mop Bracket

Scan for a tutorial video on mop Bracket installation.

Scannen Sie nach einem Video über die Installation der Mopphalterung.

Recherchez une vidéo tutorielle sur l'installation d'un support de vadrouille.

Scansione per un video tutorial sull'installazione della staffa per mop.

Escanear para ver un vídeo tutorial sobre la instalación del soporte de la fregona.

モップブラケット取り付けのチュートリアルビデオをスキャンする。

Scan the QR code for an online manual in English.

Scannen Sie den QR-Code, um das Online-Handbuch auf Deutsch zu erhalten.

Scannez le QR code pour obtenir le manuel en ligne en français.

Scansiona il codice QR per ottenere il manuale online in italiano.

Escanee el código QR para obtener el manual en línea en español.

コードをスキャンして、日本語のオンラインマニュアルを取得します。

Mop Bracket

1.1 Installing Cleaning Wipes (Wet or Dry)

1. Separate the mop bracket's [Top Cover] and [Bottom Cover].
2. Lay out the cleaning wipe (wet or dry), with the textured side facing downwards.
3. Place the [Bottom Cover] silicone side down on the top half of the wipes as shown in Figure I.
4. If you use washcloths that are on the shorter side of the size scale, refer to Figure II for diagonal placement.
5. Fold the cleaning wipe around the [Bottom Cover].
6. Attach the [Top Cover] onto the [Bottom Cover] and press down to secure the wipe in place, ensuring that the magnets are aligned.
7. Install the mop bracket assembly onto the vacuum cleaner, and start the mopping function once set up.

1.2 Replacing Cleaning Wipes (Wet or Dry)

1. Remove the mop bracket assembly from the vacuum cleaner.
2. Detach the [Top Cover].
3. Remove the used cleaning wipe from the [Bottom Cover].
4. Dispose of the used cleaning wipe into the waste bin.
5. Follow the steps in [1.1 Installing Cleaning Wipes (Wet or Dry)] to install a new wipe.