Ecovacs DEEBOT DDX67 Robot Vacuum Cleaner User Manual and Specifications

This document provides comprehensive instructions for operating and maintaining your Ecovacs DEEBOT DDX67 robot vacuum cleaner.

Getting Started and Setup

Installing the Cleaning Liquid Box

Open the top cover of the cleaning liquid box, add Ecovacs special cleaning liquid, close the cover, and install it into the base station. Ensure it clicks into place.

Installing the Dust Bin Cover

Ensure the dust bin cover is installed correctly for complete sealing.

Downloading the Ecovacs Home App

To access all features, download the ECOVACS HOME App. Scan the QR code located under the top cover or search for "ECOVACS HOME" in the App Store or Google Play.

? Note: To extend service life, use only official Ecovacs cleaning agents. Do not allow foreign objects into the cleaning liquid box.

Turning on Robot Power

Locate the power switch under the host's cover ("⚡ I" for power on, "⚡ O" for power off). Place the robot in front of the base station, ensuring the base station is connected to power.

? Note: Intelligent functions like remote startup, voice interaction, and map display require the ECOVACS HOME App. You must agree to the Privacy Policy and User Agreement for these features. Basic functions are available manually.

Robot Charging

Use the ECOVACS HOME App or voice commands to recall the robot to the universal base station for charging.

? Note: The robot cannot be charged when powered off. It is recommended to keep the robot charged after work for better performance. Start cleaning from the universal base station for smooth return charging.

Robot Network Configuration

Wi-Fi Network Requirements:

2.4GHz or 2.4/5 GHz mixed network.
Router supports 802.11b/g/n and IPv4 protocols.
Do not use VPN (Virtual Private Network) or proxy server.
Do not use hidden networks.
Use WPA and WPA2 with TKIP, PSK, AES/CCMP encryption. WEP EAP is not supported.
Wi-Fi channels 1-11 in North America, 1-13 outside North America.
If using an extender/repeater, network name (SSID) and password must match the primary network. Ensure router has WPA2 enabled.

Wi-Fi Indicator Light:

Indicator Status	Connection Status
White light on	Disconnected to Wi-Fi
Solid white light	Connected to Wi-Fi

Operating the DEEBOT

1. Create a Map

The DEEBOT creates a map during its first cleaning session. To assist, ensure the environment is clear:

Raise low-sitting furniture.
Cover the bottom of furniture.
Set up Virtual Boundary via the App.

When mopping, DEEBOT recognizes floor types and lifts mops on carpets. Avoid shaggy rugs longer than 10mm, or fold them/set them as No-Entry Zones.

For the first cleaning, ensure the robot is on the base station and fully charged. Start cleaning by pressing the button on the main unit, using the ECOVACS HOME App, or voice control.

2. Start Vacuum

See "1. Create a Map" for initial setup and starting instructions.

3. Pause

Short press the button on the main unit to pause. Alternatively, use the ECOVACS HOME App or voice control.

4. Wake Up

After pausing, indicators turn off. Press the button to restart.

5. Return to Universal Base Station

Use the ECOVACS HOME App, voice command, or button to recall the robot to the base station for charging.

6. Deep Sleep Mode

If the DEEBOT remains off the station for approximately 5 hours, it enters deep sleep mode to protect the battery. Switch OFF and ON to wake it up.

? Note: To extend mop life, do not remove it frequently. Avoid scratching the mop holder. Replace the mop when prompted by the app. Purchase accessories via the App Mall or at https://www.ecovacs.com.

Technical Specifications

Model	DDX67
Rated Input	20 V ⎓ 2 A	Charging Time	about 4.5 h
Station Model	CH2453A
Rated Input	110-120 V ~ 50-60 Hz	Rated Output	20 V ⎓ 2 A
Rated Input Current (Charging)	1 A	Power (Emptying)	4.5 A
Power (Hot Water Washing Mop)	12 A

? Note: Output power of the wireless module is less than 100 mW. Technical and design specifications are subject to change for product improvement. Explore accessories at https://www.ecovacs.com.

Scan the QR code with a mobile camera to obtain the full user guide.

Important Safety Instructions

⚠️ WARNING: Read all warnings and safety instructions. Failure to follow may result in electric shock, fire, or serious injury.

This appliance is not a toy; supervise children when in use.
Clear the cleaning area of cords, small objects, and other potential tangles. Adjust curtains and tablecloths.
If there are drop-offs (stairs, ledges), use physical barriers to prevent the robot from falling. Ensure barriers do not create a tripping hazard.
Use the appliance only as described in this manual and with manufacturer-recommended accessories.
Do not handle the power plug or appliance with wet hands.
Non-rechargeable batteries are prohibited.
Do not operate if the dustbin or filters are not in place.
Do not use in areas with open flames (candles) or fragile objects.
Operate and store within temperatures of -5°C to 40°C (23°F to 104°F). Charge between 0°C to 40°C (32°F to 104°F).
Keep clothing, hair, fingers, and body parts away from openings and moving parts.
Do not use in rooms where infants or children sleep.
For indoor use ONLY. Do not use outdoors or for commercial/industrial purposes. Avoid wet surfaces or stagnant water.
Do not pick up large objects (stones, paper), flammable materials (gasoline, ink), or burning items (cigarettes, hot ashes).
Keep openings clear of dust, lint, hair, and anything that may obstruct airflow.
Do not damage the power cord. Do not pull, carry, pinch, or run over the cord. Keep it away from heat. Unplug by gripping the plug, not the cord.
Do not use if the power cord or plug is damaged.
Do not use if the appliance malfunctions, has been dropped, damaged, left outdoors, or exposed to liquid. Refer for repair.
Power OFF the appliance before cleaning or maintenance. Turn off all controls before unplugging. Turn off before connecting/disconnecting motorized nozzles. Turn off before removing the dustbin. Turn off before removing the battery for disposal.
Dispose of batteries according to local laws. Do not incinerate batteries (explosion risk).
Unplug the station before maintenance.
Prevent accidental startup: Power OFF before connecting to battery, handling, or transporting.
Keep battery packs away from metal objects to prevent short circuits.
Avoid contact with battery leakage fluid; rinse with water and seek medical attention if necessary.
Do not use damaged or modified batteries or appliances; they may cause fire, explosion, or injury.
Do not expose batteries or appliances to fire or excessive temperatures (above 130°C / 265°F) as this may cause explosion.
Follow all charging instructions and recharge only within specified temperatures.
Servicing must be done by a qualified repairer using identical replacement parts.
Do not modify or attempt to repair the appliance or battery pack except as indicated in the manual.
Remove cords from other appliances in the cleaning area.
Do not allow children to sit on the vacuum.
Use only the manufacturer-specified charger.
Use appliances only with designated battery packs.
Battery replacement must be done by qualified personnel. Contact customer service.
For prolonged storage, fully charge, power OFF, and unplug the station.
Do not use on wet surfaces or expose to rain; store indoors.
Unplug the appliance before maintenance involving moving parts.
The brush may start unexpectedly; unplug before cleaning or maintenance.
Read the instruction manual.
Ensure the power outlet voltage matches the appliance's rating (typically 120V).
Do not use a damaged docking station.
Unplug the station before cleaning or maintenance.
Power Switch: "⚡ I" = ON, "⚡ O" = OFF.
Plug into a properly grounded outlet. Consult grounding instructions.

Compliance and Regulations

FCC Declaration of Interference

This equipment has been tested and found to comply with Class B digital device limits per FCC Part 15. These limits provide reasonable protection against harmful interference in residential installations. It generates, uses, and can emit radio frequency energy. If not installed or used correctly, it may cause harmful interference to radio communications. If interference occurs, try repositioning the antenna, increasing separation between equipment and receiver, plugging into a different circuit, or consulting a dealer/qualified technician.

This device complies with FCC Part 15. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received, including that which may cause undesired operation.

⚠️ Warning: Unauthorized modifications may void the user's authority to operate the equipment.

Industry Canada Compliance

This device contains license-exempt transmitters/receivers conforming to Industry Canada's RSS standards. Operation is subject to two conditions: (1) the device must not cause interference, and (2) it must accept any radio interference, even if it compromises its operation.

Radiofrequency Exposure Warning

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It must be installed and used with at least 20 cm separation between the antenna and any person. Do not co-locate or operate with any other antenna or transmitter.

For mobile devices (Sections 15.247 and 15.407), maintain at least 20 cm distance from persons during use for FCC compliance.

Disabling/Enabling Wi-Fi

To disable Wi-Fi: Power on the robot, place it on the OMNI station, ensure charging contacts are connected, and double-click the button.

To enable Wi-Fi: Restart the robot. Optionally, unplug and replug the satellite.

Grounding Instructions

This appliance must be grounded. In case of malfunction, grounding provides a low-resistance path for electrical current to reduce shock risk. The appliance has a grounding conductor and a grounding plug. Insert the plug into a properly installed and grounded outlet conforming to all local codes.

⚠️ Warning: Improper grounding can result in electric shock. Consult a qualified electrician if unsure about outlet grounding. Do not modify the plug. If it doesn't fit the outlet, have a suitable outlet installed.

This appliance is designed for use on a circuit with a nominal voltage of 120V and is equipped with a grounding plug similar to the one illustrated. Ensure the appliance is plugged into an outlet with the same configuration. No adapter should be used.

[Diagram: Grounding plug and outlet]

Product Composition

1. Package Contents

[Diagram: Package contents including robot, OMNI station, base, side brush, power cord, manual]

Robot
OMNI Station
Base
Side Brush
Power Cord
Instruction Manual

2. Parts Identification

2.1 Front of the Robot:

Button on DEEBOT: Short press for Start/Pause, long press for 3s to Return to Charge.
Top Cover
TrueDetect 3D Sensor
AIVI Camera
LiDAR d-ToF Module
Anti-collision Sensors and Bumpers

2.2 Rear of the Robot:

Anti-fall Sensors
Side Brush
Carpet Detection Sensor
Brush Release Button
Mounting Slots for Cleaning Pad
Assembly
Universal Wheel
Main Brush
Drive Wheels

Robot Interior and OMNI Station

3. Inside the Robot (Under Cover)

RESTART Button: To restore to factory settings, press and hold the RESTART button for 5 seconds. A voice prompt and startup sound will confirm the reset.

Network Status Indicator/Reset Button
Charging Contacts
Water Filling Port
Power Switch: "⚡ I" = ON, "⚡ O" = OFF
Edge Sensor

4. Dust Bin

Dust Removal Port
Filter
Sponge Filter
Release Button

5. OMNI Station (Front)

Dirty Water Tank
Dust Collection Cabin
Charging Contacts
Clean Water Tank
Indicator Lights:
- Solid White: Standby/Working
- Blinking Red: Malfunction
- Off: Power Failure/Prolonged Standby
Sink Cleaning

? Note: Blinking red indicates a malfunction; check the ECOVACS HOME app. If DEEBOT does not charge, clean the charging contacts with a clean, dry cloth.

6. Dust Bag

Dust Bag Handle

7. OMNI Station (Return)

Power Switch: "⚡ I" = ON, "⚡ O" = OFF (APAGADO)
Air Vents
Power Outlet

Sensor Descriptions

Name	Functional Description
LiDAR d-ToF Module	Uses laser telemetry to measure distance to surrounding objects (up to 10m) by calculating the time difference of the returning light. Helps locate objects and map the environment.
3D TrueDetect Sensor	Emits infrared rays to detect obstacles. Uses reflected light and similar triangles to calculate distance (up to 0.4m). Automatically turns to avoid obstacles.
Anti-fall Sensor	Uses infrared telemetry to detect height differences (e.g., steps). When a predefined threshold is exceeded, the robot stops to prevent falls.
Carpet Detection Sensor	Emits 300 kHz ultrasonic waves. Detects carpets by absorbing sound energy; identifies over 50 types of carpets.
Anti-collision Sensor	Uses an optical coupling switch principle to detect and avoid collisions with objects.
Edge Sensor	Uses infrared telemetry to detect the distance between the robot's side and obstacles, enabling edge movement to avoid missed areas.
AIVI Camera	Uses AI cameras to capture environmental images for recording and remote video calls (interacts with MIC). FOV: 77° Vertical, 97° Horizontal.
Microphone	Detects human voice vibrations to record sound and enable voice control for specified tasks. Wake-up distance is 5m.

Product Usage Precautions

Clear the cleaning area by rearranging furniture (e.g., chairs) and removing floor clutter like cables, cloths, and slippers to improve cleaning efficiency.
Place a physical barrier at the edge of any drop-offs (like stairs) to prevent the unit from falling.
For the first use, ensure doors to rooms are open to allow the DEEBOT to explore the entire home.
Ensure cleaning areas are well-lit for the AIVI camera to function correctly. Remove power cords and small objects from the floor.
Before using on carpets with fringed edges, fold the edges underneath.
Avoid standing in narrow spaces like corridors and do not block the AIVI camera.
Clean the AIVI camera and TrueMapping distance sensor with a clean cloth. Avoid using detergents or spray cleaners.

	ECOVACS DEEBOT T50 PRO OMNI Label and Technical Specifications This document provides the technical specifications and label details for the ECOVACS DEEBOT T50 PRO OMNI robot vacuum cleaner, including material, quality, and environmental requirements.
	ECOVACS T50 PRO OMNI Robot Vacuum Instruction Manual Comprehensive guide for the ECOVACS T50 PRO OMNI Robot Vacuum, covering safety, setup, operation, maintenance, and troubleshooting.
	ECOVACS DEEBOT T50 PRO OMNI Instruction Manual This manual provides detailed instructions for the ECOVACS DEEBOT T50 PRO OMNI, covering safety precautions, product diagrams, setup, operation, maintenance, and troubleshooting.
	ECOVACS DEEBOT T50 PRO OMNI Instruction Manual Comprehensive instruction manual for the ECOVACS DEEBOT T50 PRO OMNI robot vacuum cleaner. Learn about setup, operation, maintenance, and troubleshooting.
	ECOVACS DDX67 Floor Cleaning Robot EU Declaration of Conformity This document is the EU Declaration of Conformity for the ECOVACS DDX67 Floor Cleaning Robot, including the docking station CH2453A/CH2453C. It confirms compliance with various EU directives and harmonized standards.
	ECOVACS DEEBOT T10 TURBO Instruction Manual Comprehensive instruction manual for the ECOVACS DEEBOT T10 TURBO robot vacuum cleaner. Learn about safety, setup, operation, Wi-Fi connection, charging, and maintenance for your DEEBOT T10 TURBO.
	ECOVACS DEEBOT T9+ Instruction Manual Comprehensive instruction manual for the ECOVACS DEEBOT T9+ robotic vacuum cleaner, covering setup, operation, maintenance, and troubleshooting.
	ECOVACS DEEBOT T20e OMNI Instruction Manual - User Guide Comprehensive instruction manual for the ECOVACS DEEBOT T20e OMNI robot vacuum. Learn about setup, operation, maintenance, safety, and troubleshooting for your smart home cleaning device.