Lofree EDGE84 Low Axis Keyboard

Specifications

• Number of keys: 84
• Numbers of Multifunction Keys: 16
• Materials: Aluminum Alloy Unibody + Carbon Fibre, PBT Keycaps
• Interface: Type-C
• Mode: Wired/Bluetooth
• Bluetooth Name: EDGE84@Lofree
• Dimensions: 318 mm x 154 mm x 16.5 mm

Indicator Lights and Modes

Battery Indicator

• Charging: Indicator glows with a breathing white light.
• Charged: Indicator stays solid white.
• Battery < 20%: Indicator glows with a breathing red light.
• Battery < 5%: Indicator flashes red until it turns off.

Caps Lock and Status Indicators

• Caps Lock Indicator (White):
  • Indicator white light enabled: Caps Lock is on.
  • Indicator white light disabled: Caps Lock is off.
• Bluetooth Pairing Indicator (Blue):
  • During Bluetooth pairing, the indicator blinks slowly for 1 minute.
  • After successful pairing, the indicator stays solid blue for 3 seconds.
  • During device switching, the indicator flashes blue for 3 seconds, then stays solid blue for 3 seconds.
  • During Bluetooth reconnection, the indicator blinks blue.
  • After reconnection, it stays solid blue for 3 seconds before returning to its previous state.

Mode Switch

The keyboard features a three-position mode switch: OFF, ON (for wired mode), and BT (for Bluetooth mode).

Type-C Interface

The Type-C port serves as both the wired connection interface and the charging port.

Connection Guides

Wired Connection

1. Toggle the mode switch to the 'ON' position.
2. Connect the keyboard to your device using the attached Type-C cable.

Bluetooth Connection

1. Toggle the mode switch to the 'BT' position.
2. Long press Fn + 1, Fn + 2, or Fn + 3 until the indicator blinks slowly in blue. This selects the Bluetooth channel for pairing.
3. On your device, find and select "EDGE84@Lofree" from the list of paired devices to establish the connection.
4. Status Indicator: After successful pairing, the indicator stays solid blue for 3 seconds and then turns off.
5. To switch between paired Bluetooth devices, press Fn + 1, Fn + 2, or Fn + 3.

Advanced Features

Ambient Light Control

Use the following key combination to control the ambient lighting:

Fn + Left Arrow / Right Arrow: Cycle through Ambient Light modes: Steady, Breathe, Off.

System Switch

To ensure compatibility with different operating systems, use the following key combinations:

• Fn + N: Activate Windows/Android system function keys.
• Fn + M: Activate Mac/10S system function keys.

Multifunction Keys

The keyboard includes a range of multimedia and function keys accessible via the Fn key:

Environmental Protection and Safety

Hazardous Substances

This table details the presence of hazardous substances in product components, prepared in accordance with SJ/T 11364 and EU directive 2011/65/EU (revised 2015/863/EU).

O: Indicates the hazardous substance is below the limit requirement in GB/T 26572.

X: Indicates the hazardous substance is above the limit requirement in GB/T 26572.

Environmental Protection Instructions

The electronic parts of this product are designed not to leak or change under normal use conditions for approximately ten years. During this period, the components are not expected to cause serious environmental pollution or damage to human health or property. The product may feature an environmentally friendly use period mark, with the lifespan varying by component and manufacturer. The expiration date on a component takes precedence over any conflicting information on the product.

Warnings

• If the battery is not replaced properly, there may be leakage or explosion, posing a risk of personal injury.
• Do not use the battery if it exhibits leakage, discoloration, deformation, or any other abnormality.
• Do not leave the battery in a discharged or unused state for an extended period.
• Do not short-circuit the product.
• Battery life varies with usage. Used batteries should be disposed of in accordance with local laws or returned for electronic device recycling.
• If any liquid accidentally enters the product, immediately disconnect the power supply and remove the product. Continued use may cause fire or electric shock.
• For inspection and maintenance, please contact the authorized agent or the nearest customer service center.

Regulatory Compliance

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Specific Absorption Rate (SAR) Information

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The SAR limit for the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device has been tested against this SAR limit for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the device. Accessories such as belt clips, holsters, and similar items should not contain metallic components. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Customer Support

For assistance, please contact:

Service Hotline: 4006002083

Website: www.lofree.com.cn

Website: www.lofree.co

Follow us on social media:

Facebook: lofree.co

Instagram: lofreeco

Twitter: lofree.co