Netis AC1200 Dual Band WiFi Range Extender Quick Installation Guide

Package Contents

The package includes the Netis AC1200 Dual Band WiFi Range Extender (Model: E3).

Hardware Information

The device features a PWR LED, WPS LED, Signal LED, a WPS button, a Reset button, and a LAN port.

LED Descriptions:

PWR LED: Solid on (Repeater started), Off (Repeater not powered on).
WPS LED: Solid on (WPS connection established), Off (WPS function disabled).
Signal LED: Solid blue (Repeater connected to WiFi router, proper position), Solid red (Repeater too far from router, relocate closer), Off (Repeater does not connect to WiFi router).

Extending Your WiFi Network

Two methods are provided for extending your WiFi network:

Method 1: Using WPS

Power on the Repeater by plugging it into a power outlet near the router. Wait for the PWR LED to turn solid blue.
Press the WPS button on your router, and within 2 minutes, press the WPS button on the repeater.
Wait for the Signal LED on the repeater to turn solid blue. If it doesn't, try Method 1 again or use Method 2.

Relocating the Repeater:

For optimal performance, plug the repeater into an outlet halfway between the router and the WiFi dead zone, ensuring it's within the range of your existing WiFi network.
Position the antennas upward and vertical to the ground.
Wait for the Signal LED to turn blue. If not, relocate the repeater closer to the router.
Connect your WiFi devices to the repeater using the SSIDs set by yourself (e.g., netis_2.4G_EXT / netis_5G_EXT) or your router's SSID with the same WiFi password.

Method 2: Using Web UI

Power on the Repeater by plugging it into a power outlet near the router.
Connect your WiFi device to the repeater's WiFi network (e.g., 'netis', 'netis_2.4G_EXT', 'netis_5G_EXT'). Disable mobile data if applicable.
Open a web browser and navigate to http://re.netis.home or http://192.168.0.254.
Create a login password for future access.
Select the WiFi network (SSID) you wish to extend.
Enter the password for the selected WiFi network.
Configure the extended network's SSID and password (by default, it uses your router's SSID with a suffix and the same password).
Click 'Extend' and wait for the 'Extended successfully!' message.

Relocating the Repeater:

For better performance, plug the repeater into an outlet halfway between the router and the WiFi dead zone, ensuring it's within the range of your existing WiFi network.
Position the antennas upward and vertical to the ground.
Wait for the Signal LED to turn blue. If not, relocate the repeater closer to the router.
Connect your WiFi devices to the repeater. The repeater's SSIDs are your WiFi router's SSID with a suffix (2.4G EXT/5G EXT). The WiFi password of the repeater is the same as your WiFi router.

FAQ

Q1: Cannot login to the web UI. Ensure your device is connected to the repeater's WiFi, mobile data is off, and the URL includes 'http://'. If using a computer, ensure it's connected to 'netis_EXT' and set to obtain IP and DNS automatically. Restore to factory settings if issues persist.
Q2: How to restore to factory settings? While the PWR LED is solid on, press and release the RESET button using a paper clip. The repeater will restore to factory settings after the PWR LED turns solid on.
Q3: Repeater cannot find the WiFi network. Ensure the router's encryption is WPA-PSK or WPA2-PSK. Change from WEP or WPA/WPA (Enterprise) if necessary, then try scanning again.

Warning

FCC PART 15.105 INFORMATION: This equipment complies with Part 15 of the FCC Rules for a Class B digital device. It may cause interference if not installed and used correctly. Users are encouraged to correct interference by reorienting antennas, increasing separation, connecting to a different outlet, or consulting a dealer/technician.

PART 15.19 COMPLIANCE INFORMATION: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of received interference.

Caution! Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Operations in the 5150-5250 MHz band are for indoor use only.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

	Netis N6 Wireless Dual Band Router Quick Installation Guide A quick installation guide for the Netis N6 Wireless Dual Band Router, covering package contents, LED explanations, hardware connections, web management page configuration, and Easy Mesh setup.
	Netis WF2409E 300Mbps Wireless N Router Datasheet Comprehensive datasheet for the Netis WF2409E 300Mbps Wireless N Router, detailing its features, specifications, hardware and software capabilities, and connectivity options for home and office networks.
	Netis WF2409E 300Mbps Wireless N Router - Features and Specifications Detailed information on the Netis WF2409E, a 300Mbps Wireless N Router featuring high speed, extended range with 5dBi antennas, multiple operation modes, and advanced security features. Includes technical specifications and connectivity options.
	netis Wireless N Router Quick Installation Guide Get your netis Wireless N Router up and running quickly with this comprehensive installation guide. Learn setup, connection, configuration, and troubleshooting steps for models like WF2409, WF2411, WF2419, and more.
	Netis Wireless N Router Quick Installation Guide A comprehensive guide to installing and configuring your Netis Wireless N Router, covering package contents, hardware connections, and web management page setup. Includes troubleshooting tips.
	How to Install Linux Driver for Netis WF2190 on Ubuntu A step-by-step guide to installing the Linux driver for the Netis WF2190 wireless adapter on Ubuntu, including two methods for installation.
	Router Netis WF2409E: Szybki Internet N300 z 3 antenami 5dBi Odkryj router Netis WF2409E N300, oferujący prędkość 300Mbps, 4 porty LAN i zasięg Wi-Fi dzięki 3 antenom 5dBi. Idealny do domu i biura, zapewnia stabilne połączenie dla wszystkich urządzeń.
	STONET ST3116GS 16-Port Gigabit Rackable Network Switch Specifications for the STONET ST3116GS, a 16-port Gigabit rackable network switch by Netis, offering high-speed Ethernet connectivity, auto-negotiation, and a durable metal design for enterprise environments.