L-SERIES CRAWLER DOZERS
700L / 750L
JOHN DEERE
PUSH BOUNDARIES
POWERFUL (represented by a flexed arm icon), RELIABLE (represented by a checkmark icon), COMFORTABLE (represented by a person icon).
TOPPABLE.
TAKE ON MORE.
Boasting increased horsepower, comfort, and reliability over previous K-Series models, the 700L and 750L Dozers are ready to take on all comers. The quieter, roomier cab enables better visibility to the blade while providing additional storage. Slope Control and SmartGrade™ options help operators achieve finish grades with less effort and fewer corrections. Plus simplified hydraulic and electrical routing helps boost reliability – for the dependable productivity you need to take on your next job.
POWER SURGE
GET CHARGED UP ABOUT PRODUCTIVITY.
Whether you're into site development or roadbuilding, the 700L and 750L deliver the performance, reliability, and ease of operation you need.
Quiet comfort
Completely redesigned cab offers better visibility, more spacious comfort, and less noise than its K-Series counterpart, along with options such as automatic temperature control (ATC) system, premium heated/ventilated seat, and rearview camera.
Don't settle for average grades
Standard electrohydraulic (EH) controls make it easy to add the grade-control system of your choice. When you opt for SmartGrade Ready including Slope Control, it's easy to upgrade to the fully integrated John Deere SmartGrade machine-control system.
The choice is yours
Looking for the most powerful dozer in its class? Take a close look at the 750L. Or if you need something slightly smaller but still extremely capable, consider the 700L, with more power and blade capacity than the previous 700K model.
More power to you
Delivering six-percent more horsepower than the 750K, the 750L powers through. The 700L provides more horsepower than the 700K. Both models have the highest horsepower and largest blade capacity in their size class.
More reliable routing
Routing of the electrical and hydraulic systems has been significantly simplified to nearly eliminate wear points, improving reliability and ease of maintenance over earlier models.
MOST HORSE-POWER IN THEIR CLASS
IT'S ABOUT FLEXIBILITY
WITH OPTIONAL SLOPE CONTROL AND SMARTGRADE™.
Both the 700L and 750L can be equipped with optional new factory-installed SmartGrade Ready including Slope Control that automatically maintains the blade angle without needing an external laser or GPS. SmartGrade Ready enables easy upgrades to a full SmartGrade 3D grade-control system in the field.
SLOPE CONTROL EASES THE PATH TO SMARTGRADE
Push productivity to the limit
Combining more power than any dozer in its class with additional weight over its predecessor, the 750L is 12-percent more productive in backfilling applications than its closest competitor.
Bigger blades
New 161-inch-wide blade option on the 750L allows you to cover larger jobsites in fewer passes. Integrated welded-on spill sheet on the 700L increases blade capacity up to 24 percent compared to 700K blade options.
Turn, turn, turn
Independent track control speeds up or slows down each side, for smooth, full-power turns. Automatic power boost helps carry big blade loads through turns.
Slope Control
Optional SmartGrade Ready including Slope Control provides simple-to-use grade control that allows operators to set and hold a grade or slope through terrain changes. It helps both new and veteran operators to hold grade with less effort, fewer corrections, and minimal adjustments to the blade.
Durable diesel
Unlike many competitor machines that run four-cylinder engines, the 700L features a reliable six-cylinder 6.8L engine that delivers more power than the previous 700K model.
A smart choice
SmartGrade features next-generation components and integration, enabling the highest levels of productivity and grading performance.
The power of SmartGrade
Unlike traditional aftermarket grade-control systems that are prone to theft, damage, and complicated installation, purpose-built John Deere SmartGrade Dozers combine powerful mastless technology with our track load-sensing system. These highly productive crawlers feature a fully integrated grade-control system that is easy to set up and run. And they're backed by the Deere dealer network and supported through features like wireless data transfer and remote display access.
Extend your workday
Optional high-output LED lighting package provides additional illumination when you need to work past or before daylight.
Outside dozer blade
With heavy-duty high-profile push beams and a three-position pitch-adjustable semi-U blade, the outside dozer (OSD) blade-equipped 750L Dozer delivers exceptional durability and high-production performance. Heavy-duty crossmembers provide solid lateral support and allow a clear view of the bottom of the blade. Available turnbuckle pitch jack helps fine-tune blade pitch for improved ground penetration and load carrying.
LOOK FORWARD TO MORE PRODUCTIVITY
LET'S SEE WHAT YOU CAN DO.
Boasting better visibility than earlier models and a host of creature comforts, the quiet, spacious cab will help you set your sights (and jobsites) on getting more done.
See what you've been missing
A wider expanse of front glass; a lower, streamlined hood; and larger doors provide better visibility to the blade and the worksite all around.
Quality seat time
Both the standard deluxe fabric-covered seat and the optional premium leather-accented heated/ventilated seat feature pan tilt, pan extend, lumbar adjustment, and air suspension with full damping capability.
Peace and quiet
On the 700L, new rubber-encased viscous cab mounts help reduce noise by over 50 percent compared to the 700K. They also effectively isolate operators from vibration to improve the ride.
Low-effort control
Updated ergonomic joysticks provide intuitive, low-effort control of the transmission, hydraulics, and rear implement.
Set and forget
Optional automatic temperature control (ATC) system allows operators to simply select a desired temperature instead of fiddling with knobs to get comfortable.
Keep close tabs on the machine
Large, easy-to-navigate monitor provides intuitive, push-button access to a wealth of machine information, including temperatures, pressures, and diagnostics. Opt for a rearview camera to display the action behind the machine on the color monitor.
Take total control
Exclusive Total Machine Control (TMC) monitor lets an operator quickly change between machine presets with the simple push of a button, or independently adjust decelerator mode and response, forward/reverse ground-speed ranges, steering modulation, F-N-R shift rate, and forward/reverse speed ratio.
VISIONARY.
16% MORE GLASS AREA (700L OVER 700K)
L-SERIES DOZERS WON'T LET UP OR LET YOU DOWN.
You can count on these dependable workers to tackle your toughest tasks. When you know how they're built, you'll see what the L-Series can take on.
Built tough
The 700L and 750L have been beefed-up with thicker sheet metal; larger doors and hydrostatic pumps; a sealed engine compartment; a simplified, heavier-duty mainframe; and a more robust c-frame-to-mainframe joint (750L only) than previous models.
Undercarriage options
Both models come standard with a durable heavy-duty undercarriage. Or opt for Extended Life undercarriage with SC-2™-treated bushings, a parts coating that delivers up to twice the wear life. Maximum Life undercarriage, with larger components and stronger seals, is available on the 700L.
Save fuel
Standard Eco mode adjusts engine power and transmission settings automatically based on load while maintaining ground speed, improving fuel economy up to 15 percent for both the 700L and 750L with no loss of productivity. Auto-idle also helps save fuel by reducing engine speed when the dozer isn't moving. Auto shutdown turns the engine off after an operator-determined period of idling, further minimizing fuel use while reducing wear on components.
Clear the way
Factory-installed limb risers and screens allow you to put this dozer to work in forestry, land-clearing, and other challenging applications.
NEVER BACK DOWN.
UP TO 15% LESS FUEL CONSUMPTION THAN K-SERIES MODELS WITH ECO MODE* (*With no loss of productivity.) ⛽
BURN LESS, EARN MORE.
KEEP FUEL AND OPERATING COSTS DOWN.
Minimal maintenance
Enlarged service doors provide quick access to conveniently located checkpoints and filters. Extended hydraulic and hydrostatic oil-change intervals from 2,000 to 4,000 hours help further minimize maintenance and expense.
Reversing cooling fan
Hydraulic reversing fan (standard on the 750L, optional on the 700L) automatically back-blows the cooler cores at preset intervals. Or simply press a button when conditions demand more frequent cleaning.
Now that's smart thinking
When equipped with optional SmartGrade™ Ready including Slope Control, the 700L and 750L have the versatility of a 2D system combined with 3D accuracy, helping optimize the productivity of your operation.
Easy cooling-package cleanout
Redesigned layout of the single-plane cooling system promotes efficient airflow, extending intervals between cleanouts.
Get valuable insight with JOHN DEERE WORKSIGHT™
The John Deere WorkSight suite of construction technology delivers Productivity Solutions to help you get more done, more efficiently. The in-base, five-year JDLink™ telematics subscription provides machine location, utilization data, and alerts to help you maximize productivity and efficiency. Other productivity solutions including grade-management and payload-weighing options are also available.
To maximize uptime and lower costs, JDLink telematics also enables John Deere Connected Support™. John Deere's centralized Machine Health Monitoring Center analyzes data from thousands of connected machines, identifies trends, and develops recommended actions, called Expert Alerts, to prevent downtime. Dealers use Expert Alerts to proactively address conditions that may otherwise likely lead to downtime. Your dealer can also monitor machine health and leverage remote diagnostics and programming capability to further diagnose problems and even update machine software without a time-consuming trip to the jobsite.
SPECIFICATIONS
700L
| Feature | 700L XLT / 700L LGP |
|---|---|
| Engine | |
| Blade Type | Power-Angle-Tilt (PAT) |
| Manufacturer and Model | John Deere PowerTech™ PVS 6068 |
| Non-Road Emission Standard | EPA Final Tier 4/EU Stage V |
| Displacement | 6.8L (414 cu. in.) |
| SAE Net Rated Power | 101 kW (135 hp) at 1,800 rpm |
| Aspiration | Turbocharged with charge-air cooler |
| Air Cleaner | Dual-stage dry tube with tangential unloader |
| Cooling Type | Variable-speed suction fan with optional reversing feature |
| Engine Coolant Rating | -37 deg. C. (-34 deg. F) |
| Engine Radiator | 10 fins per in. |
| Powertrain | |
| Transmission | Automatic, dual-path, hydrostatic (HST) drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each individually controlled track is powered by a variable-displacement piston pump and motor combination; ground-speed selection buttons on single-lever steering and direction control; reverse speed ratio is fully operator customizable; decelerator pedal provides infinite speed control from full speed to complete stop |
| System Relief Pressure | 47 573 kPa (6,900 psi) |
| Travel Speeds Forward and Reverse | 8.9 km/h (5.5 mph) |
| Maximum (optional) | 9.7 km/h (6.0 mph) |
| Steering | Single-lever steering, speed, direction control, and counter-rotation; full power turns and infinitely variable track speeds provide unlimited maneuverability and optimum control; HST steering eliminates steering clutches and brakes |
| Final Drives Total Ratio | Triple-reduction final drives mounted independently of track frames and dozer push frames for isolation from shock loads 33.59 to 1 |
| Drawbar Pull Maximum | 200 kN (45,050 lb.) |
| At 1.9 km/h (1.2 mph) | 131 kN (29,500 lb.) |
| At 3.2 km/h (2.0 mph) | 83 kN (18,600 lb.) |
| Brakes | |
| Service | HST (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or the decelerator is depressed to the detent |
| Parking | Exclusive safety feature engages wet, multiple-disc brakes whenever the engine stops, the decelerator is depressed to the end of travel, or motion is detected while the transmission control is in neutral; machine cannot be driven with brake applied, minimizing wearout; spring applied, hydraulic release |
| Hydraulics | |
| Type | Open-center hydraulic system with fixed-displacement gear pump |
| Pump Displacement | 47.5 cc |
| System Relief Pressure | 22 063 kPa (3,200 psi) |
| Maximum Flow at Unloaded High Idle | 95 L/m (25 gpm) |
| Control | 3-function electrohydraulic (EH) joystick with proportional roller-angle function |
| Electrical | |
| Voltage | 24 volts |
| Capacity Battery | 950 CCA |
| Reserve | 175 min. |
| Undercarriage | |
| Track Gauge | 1778 mm (70 in.) |
| Grouser Width | 559 mm (22 in.) |
| Chain | Sealed and lubricated |
| Shoes, Each Side | 39 |
| Track Rollers, Each Side | 7 |
| Track Length on Ground | 2615 mm (103 in.) |
| Ground Contact Area | 32 569 cm² (5,048 sq. in.) |
| Ground Pressure | 42.2 kPa (6.12 psi) |
| Track Pitch | 191 mm (7.5 in.) |
| Oscillation at Front Roller | ±94 mm (±3.7 in.) |
| Refill Capacities | |
| Fuel Tank With Lockable Cap | 262 L (69.2 gal.) |
| Diesel Exhaust Fluid (DEF) Tank | 14.2 L (3.8 gal.) |
| Cooling System With Recovery Tank | 31.4 L (8.3 gal.) |
| Engine Oil With Filter | 28 L (7.4 gal.) |
| Transmission/Hydraulic Reservoir With Filter | 102 L (26.9 gal.) |
| Operating Weights | |
| Base Weight (with standard equipment, ROPS, full fuel tank, and 79-kg operator) | 14 016 kg (30,900 lb.) |
| Dimensions | |
| Overall Height to Roof | 3047 mm (10 ft. 0 in.) |
| Overall Length | 4906 mm (193 in.) (16 ft. 1 in.) |
| Blade Width (PAT) | 3077 mm (121 in.) (10 ft. 1 in.) |
| Blade Height | 1322 mm (52 in.) (4 ft. 4 in.) |
| SAE Capacity | 3.4 m³ (4.4 cu. yd.) |
| Blade Angle | 25 deg. |
| Width Over Track | 2338 mm (92 in.) (7 ft. 8 in.) |
750L
| Feature | 750L XLT / 750L LGP | 750L OSD |
|---|---|---|
| Engine | ||
| Blade Type | Power-Angle-Tilt (PAT) | Outside Dozer (OSD) |
| Manufacturer and Model | John Deere PowerTech™ PVS 6068 | John Deere PowerTech PVS 6068 |
| Non-Road Emission Standard | EPA Final Tier 4/EU Stage V | EPA Final Tier 4/EU Stage V |
| Displacement | 6.8L (414 cu. in.) | 6.8L (414 cu. in.) |
| SAE Net Rated Power | 131 kW (175 hp) at 1,700 rpm | 131 kW (175 hp) at 1,700 rpm |
| Aspiration | Turbocharged with charge-air cooler | Turbocharged with charge-air cooler |
| Air Cleaner | Vacuum-aspirated dual-element dry canister | Vacuum-aspirated dual-element dry canister |
| Cooling Type | Variable-speed suction fan with automatic reversing | Variable-speed suction fan with automatic reversing |
| Engine Coolant Rating | -37 deg. C. (-34 deg. F) | -37 deg. C. (-34 deg. F) |
| Engine Radiator | 10 fins per in. | 10 fins per in. |
| Powertrain | ||
| Transmission | Automatic, dual-path, hydrostatic (HST) drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each individually controlled track is powered by a variable-displacement piston pump and motor combination; ground-speed selection buttons on single-lever steering and direction control; reverse speed ratio is fully operator customizable; decelerator pedal provides infinite speed control from full speed to complete stop | Automatic, dual-path, hydrostatic (HST) drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each individually controlled track is powered by a variable-displacement piston pump and motor combination; ground-speed selection buttons on single-lever steering and direction control; reverse speed ratio is fully operator customizable; decelerator pedal provides infinite speed control from full speed to complete stop |
| System Relief Pressure | 47 574 kPa (6,900 psi) | 47 574 kPa (6,900 psi) |
| Travel Speeds Forward and Reverse | 9.7 km/h (6.0 mph) | 9.7 km/h (6.0 mph) |
| Maximum (optional) | 11.0 km/h (6.8 mph) | 11.0 km/h (6.8 mph) |
| Steering | Single-lever steering, speed, direction control, and counter-rotation; full power turns and infinitely variable track speeds provide unlimited maneuverability and optimum control; HST steering eliminates steering clutches and brakes | Single-lever steering, speed, direction control, and counter-rotation; full power turns and infinitely variable track speeds provide unlimited maneuverability and optimum control; HST steering eliminates steering clutches and brakes |
| Final Drives Total Ratio | Double-reduction, planetary final drives mounted independently of track frames and dozer push frames for isolation from shock loads 46.41 to 1 | Double-reduction, planetary final drives mounted independently of track frames and dozer push frames for isolation from shock loads 46.41 to 1 |
| Drawbar Pull Maximum | 259 kN (58,250 lb.) | 259 kN (58,250 lb.) |
| At 1.9 km/h (1.2 mph) | 167 kN (37,500 lb.) | 167 kN (37,500 lb.) |
| At 3.2 km/h (2.0 mph) | 106 kN (23,750 lb.) | 106 kN (23,750 lb.) |
| Brakes | ||
| Service | HST (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or the decelerator is depressed to the detent | HST (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or the decelerator is depressed to the detent |
| Parking | Exclusive safety feature engages wet, multiple-disc brakes whenever the engine stops, the decelerator is depressed to the end of travel, or motion is detected while the transmission control is in neutral; machine cannot be driven with brake applied, minimizing wearout; spring applied, hydraulic release | Exclusive safety feature engages wet, multiple-disc brakes whenever the engine stops, the decelerator is depressed to the end of travel, or motion is detected while the transmission control is in neutral; machine cannot be driven with brake applied, minimizing wearout; spring applied, hydraulic release |
| Hydraulics | ||
| Type | Open-center load-sense hydraulic system with variable-displacement piston pump | Open-center load-sense hydraulic system with variable-displacement piston pump |
| Pump Displacement | 63 cc | 63 cc |
| System Relief Pressure | 24 993 kPa (3,625 psi) | 24 993 kPa (3,625 psi) |
| Maximum Flow at Unloaded High Idle | 130 L/m (34 gpm) | 130 L/m (34 gpm) |
| Control | 2-function EH joystick | 2-function EH joystick |
| Electrical | ||
| Voltage | 24 volts | 24 volts |
| Capacity Battery | 950 CCA | 950 CCA |
| Reserve | 175 min. | 175 min. |
| Undercarriage | ||
| Track Gauge | 1880 mm (74 in.) | 2134 mm (84 in.) |
| Grouser Width | 559 mm (22 in.) | 860 mm (34 in.) |
| Chain | Sealed and lubricated | Sealed and lubricated |
| Shoes, Each Side | 45 | 40 |
| Track Rollers, Each Side | 8 | 7 |
| Track Length on Ground | 3093 mm (122 in.) | 2604 mm (103 in.) |
| Ground Contact Area | 38 232 cm² (5,926 sq. in.) | 35 677 cm² (5,530 sq in.) |
| Ground Pressure | 43.7 kPa (6.34 psi) | 47.8 kPa (6.93 psi) |
| Track Pitch | 191 mm (7.5 in.) | 191 mm (7.5 in.) |
| Oscillation at Front Roller | ±135 mm (±5.3 in.) | ±110 mm (±4.3 in.) |
| Refill Capacities | ||
| Fuel Tank With Lockable Cap | 370 L (97.7 gal.) | 370 L (97.7 gal.) |
| Cooling System With Recovery Tank | 31.4 L (8.3 gal.) | 31.4 L (8.3 gal.) |
| Engine Oil With Filter | 28 L (7.4 gal.) | 28 L (7.4 gal.) |
| Transmission Reservoir With Filter | 57 L (15.1 gal.) | 57 L (15.1 gal.) |
| Hydraulic Reservoir With Filter | 98 L (25.9 gal.) | 98 L (25.9 gal.) |
| Diesel Exhaust Fluid (DEF) Reservoir | 14.2 L (3.8 gal.) | 14.2 L (3.8 gal.) |
| Operating Weights | ||
| Base Weight (with standard equipment, ROPS, full fuel tank, and 79-kg operator) | 17 041 kg (37,569 lb.) | 17 386 kg (38,330 lb.) |
| Dimensions | ||
| Overall Height to Roof | 3248 mm (10 ft. 8 in.) | 3248 mm (10 ft. 8 in.) |
| Overall Length (PAT) | 5359 mm (211 in.) (17 ft. 7 in.) | 5359 mm (211 in.) (17 ft. 7 in.) |
| Overall Length (OSD) | - | 6054 mm (238 in.) (19 ft. 10 in.) |
| Blade Width (PAT) | 3265 mm (129 in.) (10 ft. 9 in.) | - |
| Blade Width (OSD) | - | 4083 mm (161 in.) (13 ft. 5 in.) |
| Blade Height | 1435 mm (56.5 in.) (4 ft. 8.5 in.) | 1435 mm (56.5 in.) (4 ft. 8.5 in.) |
| SAE Capacity (PAT) | 3.9 m³ (5.2 cu. yd.) | - |
| SAE Capacity (OSD) | - | 4.3 m³ (5.6 cu. yd.) |
| Blade Angle | 24 deg. | 26 deg. |
| Width Over Track (PAT) | 2989 mm (118 in.) (9 ft. 10 in.) | - |
| Width Over Track (OSD) | - | 2741 mm (108 in.) (9 ft. 0 in.) |
Detailed diagrams illustrate machine dimensions and component layouts for various configurations, including blade types (PAT, OSD) and optional equipment like rear rippers and winches.
Additional equipment
700L / 750L Engine
- Meets EPA Final Tier 4/EU Stage V emissions
- John Deere PowerTech™ PVS 6068 6.8L engine
- Wet-sleeve cylinder liners
- Eco mode
- Exhaust stack, black
- Exhaust stack, chrome
- Turbocharged and air-to-air aftercooled
- Dual-element dry-canister air cleaner
- Engine glow-plug starting system
- Programmable auto engine shutdown
- Automatic turbo cool-down timer
- Exhaust filter, under hood, with vertical stack
- Fuel filters with automatic electronic priming
- Severe-duty fuel filter
- Engine coolant heater, 120 volt
- 110-amp alternator (canopy)
- 145-amp alternator (cab)
700L / 750L Cooling
- Hydraulically driven cooling fan, variable-speed suction type
- Engine cooling rated -37 deg. C (-34 deg. F)
700L / 750L Powertrain
- Dual-path HST transmission
- Reverse-speed ratios (100%, 115%, and 130% presets or operator defined)
- Operator-selectable decelerator function (hydrostats and engine or hydrostats only)
- Single-lever steering with counter-rotate function
- Full power turns with infinitely variable track speed
- HST (dynamic) service brakes
- Wet, multi-disc parking brake
- Remote diagnostic test ports
- Automatic cold-weather transmission warmup system
- Automatic transmission derating for exceeded system temperatures
- Vented dedicated transmission reservoir and filtration system separate from hydraulic system
700L / 750L Hydraulic System
- Electrohydraulic (EH) system with fixed-displacement hydraulic gear pump
- Load-sense EH system with variable-displacement piston pump
- 3-spool EH control valve for Power-Angle-Tilt (PAT)
- 3-spool EH control valve for Outside Dozer (OSD) with single auxiliary
- 4-spool EH control valve for PAT with single auxiliary
700L / 750L Hydraulic System (continued)
- Grade-control-ready EH hydraulics
- SmartGrade™ ready including Slope Control system
- SmartGrade 3D mastless grade control including Slope Control
- Hydrau™ All-Season Hydraulic Oil, -25 deg. C to 50 deg. C (-13 deg. F to 122 deg. F)
- Hydrau™ XR Hydraulic Oil, -40 deg. C to 40 deg. C (-40 deg. F to 104 deg. F)
- Cylinder-rod scrapers (PAT only)
- Hydraulic pump, standard
- Hydraulic pump, high flow
- Hydraulic pump for direct-drive winch
- Vented dedicated hydraulic reservoir and filtration system separate from transmission system
700L / 750L Undercarriage
- Full-length, smooth-surface track frame covers
- Double-flange rollers
- Oscillating undercarriage
- Maximum Life undercarriage system
- Heavy-duty sealed and lubricated undercarriage
- Extended Life undercarriage with SC-2™ bushings
- Full-length rock guards
700L / 750L Operator's Station
- Canopy cab with under-seat heater
- Enclosed cab with air/heat
- Automatic temperature control (ATC) system
- Standard seat, vinyl with heavy-duty air suspension (canopy)
- Deluxe seat, cloth with heavy-duty air-suspension (cab)
- Premium seat, leather-accented, heated and ventilated, with heavy-duty air-suspension (cab)
- Under-seat heater (canopy)
- AM/FM/Weather-Band (WB) radio with front auxiliary (cab)
- Premium radio with Bluetooth®, AM/FM/WB radio, remote auxiliary, and remote USB port (cab)
- Multifunction/multi-language 178-mm (7 in.) color LCD monitor: Tachometer, hour meter, transmission direction and speed (forward/reverse), exhaust filter status, ambient temperature, and clock
- Built-in diagnostics: Diagnostic-code details / Sensor values / Calibrations / Individual circuit tester
- Backup alarm
- Rearview camera
- 12-volt accessory plug (1)
- Additional 12-volt accessory plug
- Keyless start with multiple security codes
700L / 750L Operator's Station (continued)
- Retractable seat belt, 76 mm (3 in.) (conforms to SAE J368)
- Fire extinguisher mounting bracket
- External-mounted rear-attachment mirror (cab)
- Rear wiper and washer (cab)
700L / 750L Overall Vehicle
- Environmental drain package
- Fluid-sample ports
- JDLink™ wireless machine communication system (available in specific countries; see your local dealer for details)
- Quick service ports (HST, hydraulic, and engine oil, and coolant)
- Halogen lights: cab-mounted front (2) and cab-mounted rear (2)
- Premium LED lights: cab-mounted front (4) and cab-mounted rear (2)
- Engine-compartment light
- Beacon light
- Trimble-ready interface package
- Leica-ready interface package
- Heavy-duty grille
- Final-drive trash guards (waste applications)
- Full screens for cab
- Rear window screen
- Large debris prescreen
- Forestry limb risers (sweeps)
- Lockable master electrical disconnect switch
700L / 750L Attachments
- Rear ripper, parallelogram
- Counterweight, front, 144 kg (317 lb.)
- Single rear counterweight
- Retrieval hitch with pin
- Retrieval hitch with 1 counterweight
- Extended rigid drawbar
- Extended rigid drawbar with 1 counterweight
- Winch, John Deere 4000S, power in/free spool out OR power out
- 4-roller fairlead for winch
- Threaded pitch jack (OSD only)
700L / 750L Shoes
- 559-mm (22 in.) moderate service
- 610-mm (24 in.) moderate service
- 610-mm (24 in.) moderate service with clipped corners
- 610-mm (24 in.) extreme service with clipped corners
- 710-mm (28 in.) moderate service
- 860-mm (34 in.) moderate service with clipped corners
SAFETY live with it
John Deere.com
