iTOUCH Explorer 3 Smartwatch

Important Safety Information

This is NOT a medical device. This device and related software and applications are NOT intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease. Users should NOT interpret or take clinical action based on the device output without consultation of a qualified healthcare professional.

What's In The Box?

Your Smartwatch box includes:

• Smartwatch (Color and material vary)
• Magnetic Charging Cable

The interchangeable bands come in a variety of colors and materials. Additional bands for your device are sold separately.

Charging Your Smartwatch

A fully charged device has an extended battery life of up to 7 days (usage time). Battery life and charge cycles vary based on usage.

• Plug the charging cable into the USB port on a computer or UL-certified USB wall charger. It is recommended to use the USB port on a computer.
• Connect the magnetic charging cable by aligning the metal pins to the contacts on the back of the watch. A charging screen will appear, indicating that your smartwatch is charging.

Note: The smartwatch takes about 1-2 hours to fully charge.

Set Up Your Smartwatch

Our free mobile app is compatible with most iPhones and Android Phones. A smartphone is required for initial setup as well as call, text, and mobile app notifications.

To Get Started:

1. Find the iTouch Wearables App at one of the locations below, depending on your smartphone. Scan the QR code with your phone camera or a QR app for a link to the iTouch app.
2. Download and install the app. The application will ask for permissions once installed and your account has been set up. It is highly encouraged to allow all notifications & pairing access requests for complete functionality.
3. Once the app is installed, open it to create an account, following the on-screen prompts. The application will help you connect to your smartwatch.
4. To connect & sync your app to your smartwatch, please follow the on-screen instructions while setting up your account.

System Requirements:

• Android: 9.0 and up
• iOS: 13.0 and up

Make sure your phone's Bluetooth is turned on and enabled during the pairing process.

Note: Do not use your phone's Bluetooth menu to pair the watch. To properly connect your smartwatch, follow the pairing instructions within the mobile application. If you have already connected your phone to the smartwatch, disconnect and "forget" the Bluetooth connection prior to setting up your watch through the application.

For more information, manuals, or technical support, visit the Help Center: support.itouchwearables.com

YOUR DEVICE WILL ONLY WORK WITH THE iTOUCH WEARABLES APP ACCESSED BY THE QR CODE ABOVE.

Basics

Power On / Off Your Smartwatch

Power On: Tap and hold the screen for 5 seconds until you see the device's logo appear on the watch screen. You can also hold the top right button to power on / off.

Power Off: From the main watch face, swipe down from the top of the screen to reveal the Quick Settings menu. Find the Power icon [power-icon] on the top left. After tapping this selection, the smartwatch will ask if you're sure you would like to turn off the device. Tap the blue check mark [checkmark-icon] to power off.

Motion Gesture

Allows you to rotate your wrist to wake the watch screen. In the mobile app, tap 'Menu' > 'Settings' > 'Motion Gesture'. You can control the time in which this feature is active. Setting it to be always on will consume more battery.

Brightness

Adjust the Brightness on your watch in two ways. From the Quick Settings menu (swipe down from main watch face), tap the Brightness icon [brightness-icon] to cycle through brightness levels. Brightness Menu is also found in full Settings where you can adjust levels using '+' or '-'. Increased brightness will consume more battery.

Changing Watch Faces

From The Smartwatch: From the main watch face screen, hold the center of the screen for 3 seconds to switch the watch face. Swipe from left to right to see options and tap to select. Your smartwatch will vibrate to confirm the change.

From The Mobile App: Choose from an expansive watch face library in the app's settings or create your own. Go to Settings > Watch Faces. Choose a category to see available options. (Watch Face Library not available on all devices)

Setting a Custom Watch Face: You can add your own image, format text, and display favorite features. Go to Settings > Watch Faces. Tap 'Personalize' and choose 'Custom' to begin. Tap 'Save/Done' to apply.

Navigating The Smartwatch

Your Smartwatch is a full touch device. Swipe the screen in many directions to interact. Swipe from right to left on the screen to navigate through features. Tap the screen to activate a feature.

The device has two physical buttons on the right side. The top right button wakes/sleeps the screen and, when held for 5 seconds, powers the device on/off. The bottom right button is the "home" button and returns you to the home screen with a single press.

Apps And Features

From the main watch face, swipe left to scroll through frequently used apps like Heart Rate and Sports Mode. Swipe right to access the full menu. Swiping up from the main watch face enters Notifications. Swipe down for Quick Settings (Power, Brightness, Vibrate, Weather, Settings), which also shows Battery Level and Bluetooth connection status.

To exit most features, swipe right to return to the previous screen. You can also press the bottom right physical button to return home from any screen.

View Messages And Notifications

On the main watch face, swipe up from the bottom of the screen to reveal recent messages. Tap on any message to read the full message. To exit, swipe down from the top or swipe right if in an expanded message.

Access Quick Settings

To open Quick Settings, swipe down from the main watch face. You can turn off your watch, view weather, control vibration, adjust brightness, power off, enter full settings, view battery level, and confirm Bluetooth connection. To exit Quick Settings, swipe up or press the home button.

Haptic Feedback Control

Vibrations alert you for notifications, alarms, and feature activation. Vibrations can be disabled in Quick Settings. Swipe down from the main watch face and tap the bottom left icon [vibration-icon] to toggle on or off. Turning vibration off will extend battery life.

Navigation Tips & Features

Alarms

Alarms vibrate to alert you at the chosen time. You can set up to three alarms to occur once or on multiple days of the week.

Controlling Alarms On Your Smartwatch: Alarms can be created within the Settings menu of the phone app. Once set and synced, toggle alarms on/off from your smartwatch. Swipe down from the main watch face screen to reveal Quick Settings. Tap the 'Settings' icon [settings-icon]. Navigate to Alarms and tap on it. You can see created alarms and toggle them. Note: for alarm changes to take effect, your smartwatch needs to sync with the app.

Stopwatch

You can time events with the stopwatch feature. On the main watch face, swipe right and scroll down to 'Settings'. Tap 'Stopwatch'. To begin recording time, tap the 'Play' button [play-icon]. To exit, swipe right or press the home button.

Apps & Features

Fitness and Exercise (Sports Mode)

Your smartwatch is equipped with 11 sports modes to track specific exercises such as running, golf, football, basketball, and more. Each exercise tracks details including steps, total time, average heart rate, calories burned, and distance.

Sports modes included are:

• Hiking
• Running
• Cycling
• Cycling Indoor
• Walking
• Football
• Tennis
• Basketball
• Golf
• Baseball
• Soccer

• Once you begin a sports mode, the exercise may show two pages (indicated by dots at the bottom). Swipe left and right to navigate between activity data and pause/stop options.
• You can perform sports near or away from your smartphone. The smartwatch will automatically sync with the app when within Bluetooth range. The activity will appear on the app's home screen.
• Sports modes should be performed one at a time. After stopping a mode, sync the data to the app first before starting another. Completing multiple modes without syncing may cause data loss.
• The watch will alert you if the activity time is too short to record. Activities less than 3 minutes will not be saved.

You can view completed sports modes and calories burned in the Calories card on the mobile app dashboard.

Notifications & Messaging

The watch can display call, text, social media, and other app notifications from your smartphone. The smartwatch and phone must be within Bluetooth range to receive notifications.

Set Up Notifications

Ensure Bluetooth is enabled on your phone and that your phone permissions allow notifications (usually under Settings > Notifications). Then, in the mobile app, tap the 'Menu' icon > Settings > Watch Notifications. Select the notifications you wish to receive.

Note: Notification permissions differ between iOS and Android users.

Viewing Incoming Notifications

When within range, notifications cause the smartwatch to vibrate. If you don't read a notification immediately, you can check it later by navigating to Messages on your smartwatch. Swipe up from the main watch face to reveal Messages. Tap any message to read it. To exit, swipe down from the top or swipe right if in an expanded message.

Manage Notifications

The device stores up to 5 notifications; older ones are replaced as new ones arrive. You can turn off all or certain notifications via the app's Watch Notifications settings. You can also mute all notifications by enabling Do Not Disturb mode.

Note for Android Users: The 'Other' function allows notifications from apps not directly supported. When 'Other' is on, all notifications from your smartphone's notification panel will be displayed by the watch.

Activity & Sleep

Your smartwatch continuously tracks stats whenever worn. Data syncs with the watch when within Bluetooth range. It is recommended to sync your smartwatch to the app at least once a day.

Track Daily Goals

The smartwatch tracks progress towards daily goals set during account setup. Upon reaching a goal, the app sends a push notification. If a step goal is achieved, your smartwatch vibrates and shows a celebratory badge. Goals can be added anytime (Settings > My Goals).

View your core stats: steps taken, calories burned, and distance covered. Find your complete history and other automatically detected information in the app.

Sedentary Reminder

Enable reminders to move in the mobile app's Settings menu under 'Reminder To Move'. When enabled, this feature is active between 10:00 AM and 6:00 PM.

Sleep Monitoring

Your smartwatch automatically tracks sleep time and stages (deep sleep, light sleep, awake time). Sync your smartwatch upon waking and check the app for sleep data. In the app, tap the Sleep card to see sleep history details. Sleep time is currently set between 10:00 PM and 8:00 AM.

Heart Rate Monitor

The device tracks your heart rate throughout the day. To measure real-time heart rate, navigate to the heart rate feature by swiping left on the main watch face or by accessing the full menu, scrolling down, and tapping 'Measure HR'. Tap the screen to activate. The watch vibrates when taking a measurement and again upon completion, displaying your heart rate.

Continuous Heart Rate

Your smartwatch supports 24/7 heart rate detection. Activate this in the mobile app by navigating to Settings and tapping 'Continuous Heart Rate Detection'. When active, your smartwatch records your heart rate every 30 minutes. This data syncs automatically with your app when within Bluetooth range. Continuous heart rate detection improves sleep statistic accuracy. Turn it off to preserve battery life.

Note: The graph in the Heart Rate section is connected to the Continuous Heart Rate function. If it's off, the graph will not appear.

Not a medical device. This device and related software are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease. Users should not interpret or take clinical action based on the device output without consultation of a qualified healthcare professional.

Connected GPS

The Connected GPS feature uses your nearby smartphone's GPS sensors to provide workout stats, recap, route, and pace information. To use Connected GPS, go to the mobile app home page, tap the 'Menu' icon > Running Mode. Tap 'Start' to begin tracking. Connected GPS mode remains enabled until paused or stopped. This screen shows heart rate, steps, pace, and calories burned. You can toggle between this screen and a live map of your route. Review your exercise history via the app.

Smartwatch Features

Music Remote

Navigate to Music Remote from the main watch face by swiping right to access the full menu. The music remote allows you to play/pause, skip forward, or skip to previous music from your music apps. Compatible with Apple Music, Spotify, and Pandora; may not support other third-party applications.

Camera Remote

To snap photos using your smartwatch, navigate to the camera remote function. With the app open, go to the settings page and tap Camera Remote. This launches the built-in camera app. (iOS Users: Tapping Camera Remote advises opening your native camera to take pictures with your watch). Tap the Camera Remote icon on your smartwatch or rotate your wrist to take a picture with your phone.

Weather

Once paired with the mobile app, go to Settings > Weather. Your location should be found automatically, or you can enter it manually. The watch will update with the latest weather readings. From the Weather screen, tap to view more data. Your smartwatch shows a 5-day forecast, updating hourly (while connected to the mobile app). You can change temperature units here. If the smartwatch cannot update weather, it will show no information, usually due to a lost phone connection. Reconnect via the application.

Note for Android Users: Due to Android restrictions, some information may not be sent from your phone to the watch. Follow the steps above to ensure weather data is updated.

Find Device

Tap 'Find Device' under Settings in the mobile app to vibrate your smartwatch when paired. Note: your watch must be within range of your phone, connected via Bluetooth, and powered on.

Language

Tap 'Language' under Settings to change the language on your smartwatch. Choose from a variety of languages. Note: setting the language on your smartwatch does not change the language on the mobile app.

Do Not Disturb

Open the mobile app Settings and go to 'Do Not Disturb' to enable the function. This will silence any notifications your watch would regularly receive.

Time / Unit Formats

Tap 'Time Formats' under Settings in the mobile app to select between 12 and 24-hour format. Tap 'Units' under Settings to change measurement units on your smartwatch and/or app, choosing between metric and imperial systems.

Update, Restart, and Reset

Update Smartwatch Firmware

Firmware updates fix bugs, improve stability, and add features. You may receive a pop-up notification from the app if an update is available. You can also manually check for updates: open the mobile app > main menu > Settings > Update Firmware. Tap 'Update' to download and install. Keep your smartwatch within Bluetooth range of your phone during the update. The watch will automatically reset upon completion.

Restart Your Smartwatch

If you encounter issues like syncing problems or stat tracking errors, restarting your watch can help. From the main watch face, swipe down for Quick Settings and tap the power icon [power-icon]. Tap the blue check mark [checkmark-icon] to confirm powering off. Wait 30 seconds for the device to shut down. Then, tap and hold the smartwatch screen for 3-5 seconds to turn it back on.

Reset Your Smartwatch

If restarting doesn't resolve the issue, tap the 'Reset' option in the watch's Settings to reset your smartwatch and clear all data.

Wear and Care

Our smartwatches are designed for all-day and night wear. Follow these guidelines for proper wear and care:

• Clean your band and wrist regularly, especially after intense workouts or sweating.
• Rinse the band with water or wipe it with a small amount of rubbing alcohol. Do NOT use hand soap, dish soap, hand sanitizer, cleaning wipes, or household cleaners, as they can get trapped beneath the band and irritate your skin.
• Dry the band thoroughly before putting it back on.

This smartwatch is IP67 water resistant, meaning it can withstand submersion up to one meter for no longer than 30 minutes. It is advised not to swim with your smartwatch. However, it can handle splashes, rain, and daily activities like washing dishes. If your smartwatch gets wet, remove it until dry. Wearing a wet band for extended periods is not good for your skin.

Not a medical device. This device and related software are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease. Users should not interpret or take clinical action based on the device output without consultation of a qualified healthcare professional.

Regulatory and Safety

FCC Regulatory Compliance

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

⚠ CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Environmentally Friendly Disposal

Old electrical appliances must not be disposed of together with the residual waste but have to be disposed of separately. Disposal at the communal collecting point via private persons is free. The owner of the old appliances is responsible for bringing them to these collecting points or similar collection points. With this small personal effort, you can contribute to recycling valuable raw materials and the treatment of toxic substances.