S 53 Smart Watch User Manual

Welcome

Welcome to use the smartwatch, a high-performance wristband smartwatch to create an intimate fitness experience.

Corrective Maintenance

When maintaining your watch, please remember the following tips:

• Clean the watch regularly, especially on the inside, to keep it dry.
• Adjust the watch tightness to ensure air circulation.
• The wristband should not use excessive skin care products.
• In case of skin allergy or discomfort, please stop wearing it.

Starting Up

Long press the upper side key for 3 seconds or plug in the magnetic suction charging cable to charge up.

Watch APP download and binding

1. Download and install the APP.

2. Scan the QR code with your mobile phone and download the APP.

3. For iOS system, select the App Store, search and download Pubu Wear. For Android system, choose the app Bora to download and install Pubu Wear, or scan the QR code to download.

Note: The phone must support Android 5.1 or iOS 8.0, Bluetooth 4.0 or above.

APP binding watch

1. Click "Bind Now" to bind the watch.

2. Click on your device on the list of scanned devices.

3. The Bluetooth pairing request will appear in the iOS system. Click Bluetooth "Pair" to confirm.

4. Android Direct connection.

5. Binding successfully.

Schematic diagram of the watch host

Charging contacts: Middle heart rate test, lower charging position.

Power-on status

Home screen menu interface switch, the interface shown below:

Brief introduction of the watch features

1. Main interface function

When the bracelet and the APP are connected for the first time, the time and date of the phone will be synchronized.

2. Step counting, distance, and calories

The step counting interface shows the step counting. When wearing the bracelet on the wrist, the bracelet automatically records the number of steps, walking distance, and calorie consumption data.

3. Sleep monitoring

Wearing the bracelet at night can automatically judge whether you enter the sleep state, record the deep sleep and light sleep respectively, and summarize the sleep time to help users monitor their sleep quality. Measure the quality of sleep according to the amplitude and frequency of your wrist movements while you sleep.

Note: Since everyone's sleep time and habits are different, the sleep monitoring time is for reference only.

4. Heart rate measurement

In the heart rate test interface, the motor vibrates once after "Start measurement" and "stop" and displays the current measurement data.

5. Exercise

The sports interface includes a variety of sports, including walking, running, cycling, rope skipping, badminton, basketball, football, and so on.

6. Voice assistant

Click the voice function. Through the connection with the mobile phone, the user's spoken English is converted into text, enabling intelligent dialogue and real-time question-and-answer intelligent interaction.

7. Telephone

Turn on the Bluetooth feature for your phone and your smartwatch. The phone searches for the smartwatch's Bluetooth device and initiates the pairing. If both parties confirm the match, there will be a prompt for a successful connection. Click the number keyboard of the watch to dial and call the phone and answer the call.

8. Blood pressure

In the blood pressure test interface, the motor vibrates once after "Start measurement" and "stop" and displays the current measurement data. The environment for measuring blood pressure should be quiet and with appropriate temperature. Rest for at least 5 minutes before the measurement. Avoid tension, anxiety, and emotional excitement. The test should be repeated three times with 2 minutes apart. The average of the 3 readings should be recorded.

9. Blood oxygen

In the blood oxygen test interface, the motor vibrates once after "start measurement" and "stop" and displays the current measurement data. Blood oxygen saturation (SpO2) is the volume of oxyhemoglobin (HbO2) bound by oxygen in the blood, accounting for the percentage of all combined hemoglobin (Hb, hemoglobin), that is, the concentration of blood oxygen in the blood.

Note: The data measured by blood pressure and blood oxygen are for reference only and cannot be used as the basis for relevant medical aspects.

10. Weather

The weather page will show the current weather. Slide up to show the weather forecast for the next four days. The weather information needs to be connected to the client before obtaining the data. If the connection is disconnected for a long time, the weather information cannot be updated.

11. Information

In the information interface, you can view the content of the message push. The number of information bars can be stored up to 9. After the number of information reaches 9, the information displayed before will be replaced one by one.

12. Camera

After connecting to the phone, the bracelet can be used as a remote control for the phone camera. APP open "Photo Control", you can "shake" the bracelet and click the icon to take photos.

13. Music control

When connecting to the phone, the bracelet can control the phone's music player. When the phone is playing music, you can use the hand ring to control the phone to play/pause, the last song, and the next song operation.

14. A flashlight

When opened, the screen will be adjusted to the maximum brightness and will always be bright. Slide left to exit the interface.

15. Set

Click the "Settings" icon to enter the function list, including display, preference Settings, media sound, dial Settings, find the mobile phone, night brightness mode, language, QR code, shutdown, factory recovery, and system.

Remove binding

Click "Unbind", click the prompt, and select S 53 to ignore the device in the Settings Bluetooth.

Bluetooth-call connection

Android: After the APP successfully connects to the watch with Bluetooth:

1. The phone will automatically pop up the "pairing" request and click "allow".
2. Some brands of mobile phone models do not need to pop up the matching confirmation authority. After connecting to Bluetooth, the call function is directly connected. After successful binding, you can answer and pull the call on the watch.

iPhone: On the mobile phone, you need to open the mobile phone to set Bluetooth in turn. In the search list, find and click the connection that matches S 53 binding successfully. You can answer and pull the call on the watch.

Watch call to unconnect

Android: Android phones can be disconnected from the phone simply by clicking to remove the device.

iPhone: After the iPhone is unbound, you also need to set the phone's Bluetooth, find S 53, click the symbol on the right, and choose to ignore this device. This will disconnect it from the mobile phone.

Frequently asked questions

1. Why does the watch automatically disconnect from the Bluetooth connection when the Android phone screen goes off?

1. After locking the "background APP Pubu Wear" process is cleared, it will cause the watch to be disconnected from the phone.
2. Set the APP to start from itself.
3. Background runs are unlimited. Android phones install the APP, and by default, background operation is intelligently limited. You need to manually set the APP without taking any restriction measures.

2. Why can't the watch receive the message push?

1. Confirm that the message push switch is enabled on the mobile phone client.
2. The confirmation message can be displayed normally in the mobile phone notification bar. The watch message push is pushed by reading the message in the mobile phone notification bar; the watch will not be able to receive the push. (You need to find the notification setting in the mobile phone Settings and open the notification switch for WeChat, QQ, phone, SMS, and the mobile phone client).
3. Open the phone settings, enter "notification access" in the top search box, and reopen Pubu Wear.

3. Why can't you wear a watch and take a hot bath?

A: The temperature of the bath water is higher, which can produce a lot of water vapor. Water vapor is a gas with a small molecular radius, making it easy to penetrate the watch's shell. When the temperature drops, it will condense into liquid water, which can easily cause damage to the watch's internal circuit, circuit board, and the watch itself.

Warning

Ask your doctor before you exercise. A smartwatch can monitor real-time dynamic heart rate, but it is not used for any medical use.