LINDSHULT LED Lighting System

Important Safety Instructions

For indoor use only.

Regularly check the cord, transformer, and all other parts for damage. If any part is damaged, the product should not be used. Keep these instructions for future use.

CAUTION! The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.

Cleaning: Use a damp cloth; never a strong cleaning agent.

WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.

Assembly Instructions

The LINDSHULT system requires assembly. Ensure you have the necessary components:

• 4x Screws
• 4x Spacers
• 2x Small Screws
• 1x Mounting Bracket and Cover

Step 1: Attach the mounting bracket to the furniture surface using 4 screws. Ensure the bracket is positioned 50mm (2 inches) from the edge of the furniture. The LED driver and power supply cord are sold separately.

Step 2: Secure the mounting bracket with screws.

Step 3: Slide the cover onto the bracket until it clicks into place.

Step 4: Connect the LED driver and power supply cord. The LED driver and power supply cord are sold separately.

Step 5: Connect up to a maximum of 4 units to the LED driver.

Note: The OMLOPP and UTRUSTA series components may be used with this system.

Product Information

The LINDSHULT LED lighting system is designed for use with IKEA furniture.

Important Note: The LED driver and power supply cord are sold separately.

Maximum of 4 units can be connected.

Manufacturer Information

Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Av. Paseo de las Palmas 275, Int. 403–404, Lomas de Chapultepec V sección, Miguel Hidalgo C.P.: 11000 Ciudad de México, México, Tel. 800-1-4532 69.

Read and follow all safety and operation instructions before using this product. For indoor use. Consult electrical specifications on the product label.