8BitDo Ultimate C Wired Controller
Overview
This document provides instructions and information for the 8BitDo Ultimate C Wired Controller.
Controller Layout
The controller features the following buttons and components:
- Home Button:
- D-pad:
- Left Analog Stick (LSB) & Press (LTS):
- Right Analog Stick (RSB) & Press (RTS):
- View Button:
- Menu Button:
- Left Shoulder Button (LB):
- Right Shoulder Button (RB):
- Left Trigger Button (LT):
- Right Trigger Button (RT):
- Status LED:
- Asterisk Button:
Connectivity
Windows
- Required System: Windows 10 (1903) or above.
- Connection: Hold the X button while connecting the controller to the USB port of your device. Wait until the controller is successfully recognized by Windows, and the Status LED stays solid.
Raspberry Pi & Android
- Requirement: OTG support is required on your Android device. Please contact your manufacturer for more information.
- Connection: Hold the B button while connecting the controller to the USB port of your device. Wait until the controller is successfully recognized by your device, and the Status LED stays solid.
Turbo Function
- The Status LED blinks continuously when a button with turbo functionality is pressed.
- D-pad, joysticks are not included in this functionality.
- To activate/deactivate the turbo functionality, hold the button you would like to set and then press the star button.
Safety Warnings
- Please always use batteries, chargers, and accessories provided by the manufacturer.
- The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
- Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
- Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
- Any unauthorized changes or modifications to the device will void the manufacturer's warranty.
Support
For further information and additional support, please visit support.8bitdo.com.