EU DECLARATION OF CONFORMITY
(No. HL_089_25bGG)
1. Radio Equipment:
Vario induction hobs 400, series
Brand: Gaggenau
2. Name and address of the manufacturer or authorised representative:
BSH Hausgeräte GmbH, Carl-Wery-Straße 34, 81739 München, Germany
3. Declaration of Conformity Responsibility:
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration:
HLV148 *
* Number can be found on the rating plate. This number is the main identifier used in the technical documentation and should not be confused with the sales name.
5. Conformity with Union Legislation:
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
- 2014/53/EU
- 2011/65/EU
- (EU) 2023/826
- (EU) No 66/2014
6. References to Harmonised Standards:
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
- EN 301 893 V2.1.1:2017
- EN 300 328 V2.2.2:2019
- EN 301 489-1 V2.2.3:2019
- EN 301 489-17 V3.2.4:2020
- EN 62233:2008
- EN 60335-2-6:2015 +A1:2020 +A11:2020
- EN 60335-1:2012+A11:2014+A13:2017 +A1:2019 +A2:2019+A14:2019+A15:2021
- EN 61000-3-3:2013 +A1:2019 +A2:2021
- EN IEC 61000-3-2:2019 +A1:2021
- EN IEC 55014-2:2021
- EN IEC 55014-1:2021
- EN IEC 63000:2018
- EN 60350-2:2013+A11:2014
7. Notified Body:
VDE Prüf- und Zertifizierungsinstitut GmbH, NB 0366
Annex III, Module B, Art. 3.3 (d), (e)
performed an intervention: 40059321
and issued the EU-type examination certificate:
8. Description of accessories and components:
Accessory: n/a
Software: n/a
Description of accessories and components, including software which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:
9. Additional Information:
Method for testing in accordance with EN 55014-1 concerning emission testing 30 – 1.000 MHz: absorbing clamp measurement 30 – 300 MHz
Signed for and on behalf of:
BSH Hausgeräte GmbH
Name: Gildas Violain
Function: Head of Development GDE-GG
Date: 16 juillet 2025
Name: Pilar Caron
Function: Head of Quality Management SLI-QM
Date: 17 juillet 2025
Place and date of issue: Lipsheim, see date of last signature