EU Declaration of Conformity
Document Number: No. HL_098_25bGG
1. Radio Equipment
Induction Cooktop Ventilation 90 Cm wide
Brand: Gaggenau
2. Manufacturer and Representative
Name and address of the manufacturer or his authorised representative:
BSH Hausgeräte GmbH, Carl-Wery-Straße 34, 81739 München, Germany
3. Declaration Responsibility
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the Declaration
Object: HLCV492 *
* Note: This number can be found on the rating plate. It is the main identifier used in the technical documentation and should not be confused with the sales name.
5. Conformity with Union Harmonisation Legislation
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
- 2014/53/EU
- 2011/65/EU
- (EU) 2023/826
- (EU) No 66/2014
6. References to Harmonised Standards
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
- EN 301 893 V2.1.1:2017
- EN 300 328 V2.2.2:2019
- EN 301 489-1 V2.2.3:2019
- EN 301 489-17 V3.2.4:2020
- EN 62233:2008
- EN 60335-2-31:2014
- EN 60335-2-6:2015 +A1:2020 +A11:2020
- EN 60335-1:2012 +A11:2014 +A13:2017 +A1:2019 +A2:2019 +A14:2019 +A15:2021
- EN 61000-3-3:2013 +A1:2019 +A2:2021
- EN IEC 61000-3-2:2019 +A1:2021
- EN IEC 55014-2:2021
- EN IEC 55014-1:2021
- EN IEC 63000:2018
- EN 60704-2-13:2011
- EN 61591:1997 +A1:2006 +A2:2011 +A11:2014 +A12:2015
- EN 60350-2:2013 +A11:2014
7. Notified Body
The notified body:
- Name: VDE Prüf- und Zertifizierungsinstitut GmbH
- Notified Body Number: NB 0366
- Intervention Performed: Annex III, Module B, Art. 3.3 (d), (e)
- EU-Type Examination Certificate: 40059321
8. Description of Accessories and Components
Description of accessories and components, including software which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:
- Accessory: n/a
- Software: n/a
9. Additional Information
Method for testing in accordance with EN 55014-1 concerning emission testing 30 – 1.000 MHz: absorbing clamp measurement 30 - 300 MHz; OATS / SAC measurement 300 – 1000 MHz; 10m
Signed for and on behalf of:
BSH Hausgeräte GmbH
Name: Gildas Violain
Function: Head of Development GDE-GG
Date: July 16, 2025
Name: Pilar Caron
Function: Head of Quality Management SLi-QM
Date: July 17, 2025
Place and date of issue: Lipsheim, July 17, 2025