Composition Explanation - Ceiling Type A
| Plastic Part | Electrical Part | Metal Part |
|---|---|---|
| Cover | PCB | Base |
| Lens | Driver PCB | |
| Other small plastic part: - Terminal block - Connector - Driver box - Others |
Sensor Other small electrical part: - Sensor PCB |
Other small metal part: - Screws |
Dismantling: Steps: refer to disassembly instruction. Type: without permanent damage.
Recommendation on disposal:
- Plastic part: reuse and recycling
- Electrical part: incineration and disposal
- Metal part: recycling ✔️
The Steps to Remove the Components
1. Type A
Description: A diagram shows a ceiling light fixture. The outer cover is depicted being detached or removed from the main body.
1. Type B
Description: A diagram shows a different model of ceiling light fixture. The outer cover is depicted being detached or removed from the main body.
2.
Description: A diagram illustrates the process of detaching the light source (e.g., an LED module or bulb) from the fixture's base.
3.
Description: A diagram shows the light source component being further detached. A screw, labeled "LOCK", is shown being removed to facilitate this separation.
