Instruction Manual for IDEAL DESIGN LAB models including: Revvhead Motorcycle Accessory Storage System, Revvhead, Motorcycle Accessory Storage System, Accessory Storage System, Storage System

Assembly instructions -Revvhead Motorcycle Accessory

here

Accessory Stand Assembly Details – Ideal Design Lab Assembly details can be found

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 2.06MB

Revvhead
Motorcycle Accessory Storage System

Part No. 1 2 3 4 5 6 7 8 9

Part Name Base
Base cover Bottom frame Helmet holder
Top frame Bottom shelf
Top shelf Screws ­ M6x15 AH
Allen key ­ M4

Qty Part no. 8 1

1

1

2

X18

1 Part no. 9 1

1

18

1

X1

Step 1 : Attach the Bottom Frame (3) to the base (1) by using Screws (X6) as shown in figure (See Detail : B).

Step 4 : Attach thr Top frame (5) to the Bottom frame (3) by using Screws (4x) as shown in figure (See Detail : C).
5

3 Detail : A

8 1

Detail : C

3

Detail : A
Step 2 : Insert the Base cover (2) into the provision given in the Base (1) as shown in figure.

Detail : C

2

Step 5 : Put the Bottom Shelf(6) and Top Shelf(7) into the

notches provided in the Frame as shown in figure

7 Step 3 : Attach the Helmet holder (4) into the Top frame by (5)
using screws (4x) as shown in figure (See Detail : B). Detail : B 4 6
Detail : B 5
www.idealdesignlab.com



References

• Ideal Design Lab