Phonak Roger Multimedia Hub
Quick Setup Guide
Device Description
The Roger Multimedia Hub is a versatile audio device. Key components include:
- On/Off Button: [Power Button]
- Indicator Light: ?
- Connect Button: [Connect Button]
- micro-USB Port: ? [micro-USB Input]
- 3.5mm Jack: ? [Audio Jack]
- Feet: ? [Device Feet]
Components
Your package typically includes:
- Roger Multimedia Hub
- Power Adapter (5V1A)
Package contents may vary slightly depending on country.
Charging the Device
Connect the provided charger to the micro-USB port on the Roger Multimedia Hub to charge the device. The indicator light will show charging status.
(Visual description: A diagram shows the charger connected to the micro-USB port of the Roger Multimedia Hub.)
Switching On/Off
To turn the device on or off, press and hold the On/Off button for a few seconds.
(Visual description: A diagram shows the On/Off button being pressed.)
Stand-alone Use
The Roger Multimedia Hub can be used independently. For initial pairing or connection, ensure devices are within close proximity (0-10 cm / 0-4 inches).
(Visual description: A diagram shows the Roger Multimedia Hub placed near another device, with a distance indicator of 0-10 cm.)
Connecting to Whiteboard
To connect the Roger Multimedia Hub to a whiteboard, follow the pairing instructions. Maintain a distance of 0-10 cm / 0-4 inches during the connection process.
(Visual description: A diagram illustrates connecting the Roger Multimedia Hub to a whiteboard device.)
Connecting to Audio Sources
Connect the Roger Multimedia Hub to audio sources such as audiobooks, tablets, smartphones, and MP3 players using the appropriate cables or wireless pairing methods.
(Visual description: A diagram shows the Roger Multimedia Hub connected to various audio devices like a smartphone and tablet.)
Indicator Light Status (Connection Button)
The indicator light on the connection button provides status information:
- Charging: ? (Solid red/orange)
- Fully charged: ? (Solid green)
- Audio broadcast: ? (Solid green)
- Connecting: ? (Pulsing blue)
- Connection successful: ? (Solid blue)
- Connection failed: ? (Solid red)
- Primary not available: ? (Pulsing red)
Indicator Light Status (On/Off Button)
The indicator light on the On/Off button shows:
- On/Off: ? (Solid green when the device is on)
- Charging: ? (Solid red/orange)
- Fully charged: ? (Solid green)
- Switched on: ? (Solid green)
- Recharge device: ? (Flashing red/orange)
Operation Range
The optimal operation range for the Roger Multimedia Hub is up to 20 meters (65 feet). If the distance between connected devices exceeds this range, audio transmission may be interrupted.
(Visual description: An icon representing distance, like ↔️, with "20 m / 65 feet".)
Resetting the Device
To reset the Roger Multimedia Hub, press and hold both the Connect button and the On/Off button simultaneously for at least eight seconds. The indicator light will flash green, and the device will restart.
(Visual description: A diagram indicating holding both buttons for >8 seconds.)
Compatibility
Please note that only Roger transmitters running on software version 4.x are compatible with the Roger Multimedia Hub.
Operating Conditions
The device is designed to operate under the following conditions:
- Temperature: 0° to +45° Celsius (32° to +113° Fahrenheit)
- Relative Humidity: Less than 95% (non-condensing)
(Visual description: Icons for temperature ?️ and humidity ?.)
Regulatory and Safety Information
CE Marking: CE
Classification: Class II
Usage: ? [Indoor Use Only]
WEEE Directive: ♻️ [Waste Electrical and Electronic Equipment]
ℹ️ [Important: Please read handling and product safety information.]
Manufacturer Information
Sonova Deutschland GmbH
Max-Eyth-Strasse 20
70736 Fellbach-Oeffingen
Germany
Website: www.phonak.com/phonak-roger
© Phonak Communications AG. All rights reserved.
Document Version: 029-3215-10/V1.01/2024-09
