Phonak TVLink II Quick Setup Guide

Introduction

This guide provides essential steps for setting up your Phonak TVLink II system to wirelessly stream audio from your television to your hearing aids.

Components

The Phonak TVLink II system includes the following key components:

• Phonak TVLink II basestation: The central unit that connects to your TV and power source.
• ComPilot II: A wearable device that receives audio from the basestation and transmits it to compatible hearing aids.
• Cables: Optical audio cable and Coaxial audio cable for connecting the basestation to the TV's audio output.

Diagram descriptions:

• Illustration of an Optical audio cable connector.
• Illustration of a Coaxial audio cable connector.
• Illustration of the ComPilot II device with buttons and a lanyard attachment.
• Illustration of the Phonak TVLink II basestation.

Step 1: Connect Power and Audio Cable

Connect the Phonak TVLink II basestation to your TV and a power outlet.

Diagram: An illustration shows the TVLink II basestation connected to a television via an audio cable (Optical or Coaxial) and to a power outlet via a power adapter. The TV displays connection ports labeled 'OPTICAL OUT' and 'COAXIAL OUT'.

Use either the Optical or Coaxial audio cable to connect the TV to the basestation. Ensure the correct input port is selected on the basestation.

Step 2: Charge ComPilot II

Charge the ComPilot II for approximately 1 hour before its first use.

Diagram: An illustration shows the ComPilot II being placed onto the TVLink II basestation for charging. A battery indicator [?] is visible, and a '1h' icon [⏱️] denotes the recommended charging time.

Place the ComPilot II on the TVLink II basestation to charge. A full charge typically takes 1 hour.

Step 3: Wearing ComPilot II

Wear the ComPilot II around your neck using the provided lanyard.

Diagrams:

• Illustration shows a person wearing the ComPilot II around their neck, positioned near the mouth.
• Illustration shows the ComPilot II being securely attached to the lanyard.

The ComPilot II should be worn comfortably around the neck, with the device positioned close to the user for optimal audio transmission.

Step 4: Switch on TVLink II

Turn on the Phonak TVLink II basestation.

Diagram: An illustration shows the power button on the TVLink II basestation being pressed. An indicator light on the basestation illuminates, confirming it is powered on. A checkmark icon [✔️] signifies successful operation.

Press the power button on the TVLink II basestation. The indicator light will turn on, indicating the device is active.

Step 5: Usage

The Phonak TVLink II enables wireless audio streaming with a range of up to 30 meters (100 feet).

Diagram: An illustration depicts a person wearing the ComPilot II, receiving audio wirelessly from the TVLink II basestation connected to a TV. An arrow indicates the wireless connection and its range of up to 30 meters (100 ft) [?].

Pause/Resume: Press the button on the ComPilot II to pause or resume audio playback [▶️/⏸️].

Volume Setting: Adjust the audio volume using the controls on the TVLink II basestation or the ComPilot II [?].

Status Indicators

Understand the different indicator lights and symbols:

• ON: A solid light indicates the device is powered on.
• Audio transmission: A blue light signifies that audio is being transmitted.
• Pause: Three blue lights indicate that the audio playback is paused.
• Pairing: Multiple flashing lights suggest the device is in pairing mode.
• No audio signal: Indicates that no audio signal is being received by the device.

Further Information

For comprehensive installation and usage details, please consult the full Phonak TVLink II user guide.