IKEA MALM Underbed Storage Box Assembly Instructions
Parts List
- Wooden Dowel (101345): 16x
- Cam Lock (123492): 16x
- Cam Bolt (119030): 18x
- Cam Bolt Housing (117434): 18x
- Screw (100224): 1x
- Screw (100006): 16x
- Wheel Bracket (111401): 8x
- Wheel Screw (123502): 16x
Assembly Steps
-
Step 1
Place one of the large side panels on a soft surface, like a rug, to prevent scratching. Insert four cam bolts (123492) into the pre-drilled holes.
-
Step 2
Attach the two shorter side panels to the first large panel. Insert four cam bolts (101345) into the shorter panels. Align these with the corresponding holes on the large panel and secure them using cam locks (123492).
-
Step 3
Attach the second large side panel. Insert four cam bolts (101345) into this panel. Align it with the assembled structure and secure using cam locks (123492).
-
Step 4
Attach the bottom panel. Insert four cam bolts (119030) into the bottom panel. Align it with the side panels and secure using cam lock housings (117434).
-
Step 5
Attach the remaining bottom panel. Insert four cam bolts (123492) into this panel. Align it with the side panels and secure using cam locks (123492).
-
Step 6
Fold the remaining large panel and attach it to the top of the structure. Ensure it aligns correctly with the side panels and secure it.
-
Step 7
Attach the back panel. Insert four cam bolts (119030) into the back panel. Align it with the structure and secure using cam lock housings (117434).
-
Step 8
Slide the drawer into the assembled frame. Secure the drawer base by inserting nine screws (100006) using the provided Allen key (100224).
-
Step 9
Attach the wheels. Secure four wheel brackets (111401) to the bottom of the storage box using four wheel screws (123502) for each bracket.
Usage
To insert the storage box, slide it into the designated space under the high bed frame. To remove, pull the drawer out.
For further assistance, please refer to the IKEA website or visit an IKEA store.
