Geeetech Prusa I3 Pro W 3D Printer DIY Kit
Copyright Declaration
The copyright of this manual belongs to Shenzhen GETECH CO., LTD. (hereinafter referred to as "Geeetech"), and all rights reserved. No part of this specification should be reproduced or extracted in any forms or means without the prior written consent of Geeetech by any company and individuals.
Technical Support
If you are interested in the technology of 3D printing, flight control, and U-home, welcome to Geeetech. We offer a series of made-up products, main boards, modules, and a variety of peripherals. For relevant information or technical support, please log in to our Forum. To know more about our new products, please visit www.geeetech.com. We will serve you wholeheartedly.
Safety Instructions
Building the printer requires physical dexterity, common sense, and a thorough understanding of the process. Detailed instructions are available for download at geeetech.com. Geeetech cannot be responsible for your health and safety during building or operation. Ensure you are confident with the process before commencing. Building and operating involves electricity; take all necessary precautions. The printer runs on 12V supplied by a certified power supply. Be aware that high currents can be involved even at 12V.
High temperatures are involved in 3D Printing: the extrusion nozzle can reach approximately 230°C, the heated bed runs at 110°C, and the molten plastic is extruded at around 200°C. Special care and attention are required when handling these parts during operation.
It is not recommended to leave the printer running unattended until you are confident in its operation. Geeetech cannot be held responsible for any loss, damage, threat, hurt, or other negligent result from building or using the printer.
Introduction
The Geeetech Prusa I3 Pro W 3D printer is engineered and manufactured by Shenzhen Getech Technology Co., Ltd. Compared to other Geeetech I3 pro printers, the I3 Pro W features a simplified and portable frame made of high-quality wood. Its DIY design offers a great sense of accomplishment as you assemble it from parts. The I3 Pro W retains the excellent features of the I3 series 3D printers, including high printing accuracy and speed, an open filament system, smooth and exquisite surface finish, a strong structure for 3D objects, and a safe and satisfactory printing experience. Paired with EasyPrint 3D printing software, the Geeetech I3 Pro W simplifies the entire printing job for both beginners and experienced users.
With an optional Wi-Fi module, you can remotely control your Pro W via the EasyPrint 3D APP and access a cloud gallery of free 3D models, enabling printing anywhere, anytime. Unleash your bold ideation with the Geeetech Prusa I3 Pro W!
(Note: Wi-Fi module is not included in this kit and needs to be purchased separately.)
Package List
This list includes all parts required to assemble your Pro W 3D Printer. Please check all parts upon receipt and ensure they are in good condition and not damaged during shipping. If any parts are missing, please contact customer service immediately, providing the NO., Name, and Qty.
| No | Name | Specifications | Qty | Image Description |
|---|---|---|---|---|
| 1 | Smooth Rod | Ψ 8*L322mm Z axis | 2 | Two smooth metal rods, 8mm diameter, 322mm length, for the Z-axis. |
| 2 | Smooth Rod | Ψ 8*L390mm X axis | 2 | Two smooth metal rods, 8mm diameter, 390mm length, for the X-axis. |
| 3 | Smooth Rod | ψ 8*L410mm Y axis | 2 | Two smooth metal rods, 8mm diameter, 410mm length, for the Y-axis. |
| 4 | Threaded Rod | M8*L300mm Z-axis screw | 2 | Two threaded metal rods, M8 diameter, 300mm length, for Z-axis screws. |
| 5 | Threaded Rod | M10*L450mm Y-axis | 2 | Two threaded metal rods, M10 diameter, 450mm length, for the Y-axis. |
| 6 | Washer | M2.5 | 6 | Six M2.5 washers. |
| 7 | Washer | M3 | 100 | One hundred M3 washers. |
| 8 | Washer | M10 | 12 | Twelve M10 washers. |
| 9 | Nut | M2.5 | 6 | Six M2.5 nuts. |
| 10 | Nut | M3 | 26 | Twenty-six M3 nuts. |
| 11 | Nut | M4 | 2 | Two M4 nuts. |
| 12 | Nut | M10 | 12 | Twelve M10 nuts. |
| 13 | Lock nut | M4 | 2 | Two M4 lock nuts. |
| 14 | Wing nut | M3 | 5 | Five M3 wing nuts. |
| 15 | Square nut | M3 | 25 | Twenty-five M3 square nuts. |
| 16 | Z-axis nut | Φ8 (tin-bronze) | 2 | Two tin-bronze nuts, 8mm diameter, for the Z-axis. |
| 17 | Spring washer | M10 | 6 | Six M10 spring washers. |
| 18 | locking ring | Φ8 with Jimmy screws | 8 | Eight locking rings for 8mm diameter shafts. |
| 19 | Screw | M2.5x8 mm | 2 | Two M2.5x8mm screws. |
| 20 | Screw | M2.5x16 mm | 4 | Four M2.5x16mm screws. |
| 21 | Screw | M3x6mm | 25 | Twenty-five M3x6mm screws. |
| 22 | Screw | M3x10mm | 17 | Seventeen M3x10mm screws. |
| 23 | Screw | M3x12mm | 7 | Seven M3x12mm screws. |
| 24 | Screw | M3x16mm | 46 | Forty-six M3x16mm screws. |
| 25 | Screw | M3x20mm | 4 | Four M3x20mm screws. |
| 26 | Screw | M3x35mm | 5 | Five M3x35mm screws. |
| 27 | Screw | M3x40mm | 1 | One M3x40mm screw. |
| 28 | Screw | M4x6mm | 4 | Four M4x6mm screws. |
| 29 | Screw | M4x25mm | 2 | Two M4x25mm screws. |
| 30 | Screw | countersunk head M3x16mm | 2 | Two M3x16mm screws with countersunk heads. |
| 31 | Spring | 20mm | 5 | Five 20mm springs. |
| 32 | Linear Bearings | LM8UU | 3 | Three LM8UU linear bearings. |
| 33 | Linear Bearings | LM8LUU | 2 | Two LM8LUU linear bearings. |
| 34 | Linear bearing | LMH8UU | 2 | Two LMH8UU linear bearings. |
| 35 | Timing Belts | Y axis | 1 | One timing belt for the Y-axis. |
| 36 | Timing Belts | X axis | 1 | One timing belt for the X-axis. |
| 37 | Driven wheel holder | Metal plate | 2 | Two metal plate driven wheel holders. |
| 38 | Couplings | 5-8mm | 2 | Two couplings (5-8mm) and associated hex keys. |
| 39 | Pulleys | 20T D5 | 2 | Two 20T D5 pulleys. |
| 40 | Driven wheel | 2 | Two driven wheels. | |
| 41 | Ball bearing | MR84zz (Placed in No.40) | 4 | Four MR84zz ball bearings. |
| 42 | Spacer | For control board | 4 | Four spacers for the control board. |
| 43 | Spacer | For LCD | 4 | Four spacers for the LCD. |
| 44 | Dovetail clamp | 19mm | 4 | Four 19mm dovetail clamps. |
| 45 | Heat sink | 4 | Four heat sinks. | |
| 46 | Sticker | 1 | One sticker. | |
| 47 | Belt bracket | 2 | Two belt bracket mounts. | |
| 48 | Knob | For LCD | 1 | One knob for the LCD. |
| 49 | Fan | 40x40x10mm 12V | 1 | One 12V fan, 40x40x10mm. |
| 50 | Fan extension cable | 3-Pin M-F | 1 | One 3-pin M-F fan extension cable. |
| 51 | USB Cord | A-B | 1 | One USB A-B cord. |
| 52 | End stop | blue / red / black | 3 | Three end stop switches (colors: blue, red, black). |
| 53 | Power input cable | 1 | One power input cable with plug. | |
| 54 | Power output cable | 1 | One power output cable. | |
| 55 | Heat bed set | With heating wire and Thermo- wire | 1kit | One heat bed set including heating wire and thermistor wire. Includes warnings about hot zones. |
| 56 | Borosilicate glass | 1 | One piece of borosilicate glass. | |
| 57 | Power supply unit | 110V-240V DC12V/0-15A | 1 | One 12V DC power supply unit (110V-240V input, 0-15A output). |
| 58 | Stepper motor | 4 | Four stepper motors. | |
| 59 | Extruder | MK8 extruder | 1 | One MK8 extruder assembly. |
| 60 | Control board | GT2560+4 A4988 | 1set | One GT2560+4 A4988 control board. |
| 61 | LCD | LCD2004 | 1 | One LCD2004 display module. |
| 62 | Zip ties | 3*150mm | 30 | Thirty 3*150mm zip ties. |
| 63 | Coil | 3M | 1 | One coil, 3 meters. |
| W1-A | XZ frame (up) | I3-01 | 1 | One upper XZ frame component (part I3-01). |
| W1-B | XZ frame (bottom) | I3-01 | 1 | One lower XZ frame component (part I3-01). |
| W2 | Left side frame | I3-02 | 1 | One left side frame component (part I3-02). |
| W3 | Right side frame | I3-03 | 1 | One right side frame component (part I3-03). |
| W4 | Z motor fix plate (left) | I3-04 | 1 | One left Z motor fixing plate (part I3-04). |
| W5 | Z motor fix plate (right) | I3-05 | 1 | One right Z motor fixing plate (part I3-05). |
| W6 | Z motor support plate | I3-06 | 3 | Three Z motor support plates (part I3-06). |
| W7 | Z motor support plate | I3-07 | 1 | One Z motor support plate (part I3-07). |
| W8 | Z top mount | I3-08 | 2 | Two Z top mount components (part I3-08). |
| W9 | Front support plate A | I3-09 | 1 | One front support plate A (part I3-09). |
| W10 | Front support plate B | I3-10 | 1 | One front support plate B (part I3-10). |
| W11 | Rear Support plate C | I3-11 | 1 | One rear support plate C (part I3-11). |
| W12 | Rear support plate D | I3-12 | 1 | One rear support plate D (part I3-12). |
| W13 | Y motor fix plate | I3-13 | 1 | One Y motor fixing plate (part I3-13). |
| W14 | Y axis connect plate | I3-14 | 2 | Two Y-axis connecting plates (part I3-14). |
| W15 | Building platform | I3-15 | 1 | One building platform (part I3-15). |
| W16 | Y bearing block | I3-16 | 3 | Three Y bearing blocks (part I3-16). |
| W17 | belt bracket mount | I3-17 | 1 | One belt bracket mount (part I3-17). |
| M1 | X-axis left end | left | 1 | One left X-axis end component. |
| M2 | X-axis right end | Right | 1 | One right X-axis end component. |
| M3 | Bearing mount | PI3F-S07 | 1 | One bearing mount (part PI3F-S07). |
| M4 | Bearing Bracket | PI3F-08 | 4 | Four bearing brackets (part PI3F-08). |
| M5 | Extruder bracket | PI3B-S01 | 1 | One extruder bracket (part PI3B-S01). |
| F1 | Ejector pin | 1 | One ejector pin. | |
| F2 | File | 1 | One file. | |
| F3 | Filament spool set | Wooden kits | 1kit | One filament spool set for wooden kits. |
| F4 | Starter filament | About 3 meters | 1 | One starter filament, approximately 3 meters long. |
| F5 | Screw driver kit | 1 | One screwdriver kit. | |
| F6 | Ball-point pen | 1 | One ball-point pen. |
General Care and Maintenance
As with all electronic equipment, keep your printer clean to extend its life. Regularly remove dust and debris with a microfiber cloth or compressed air. Clean the tube and nozzle after each use for fluent performance.
- ⚠️ Do not leave the heaters on the printer turned on for long periods when not in use.
- ? Do not leave your printer in shady and moist places, as this may exacerbate erosion problems.
- ⚙️ The three axes of the GEEETECH I3 Pro W are lubricated with grease for smooth operation and longevity. Grease may need to be re-applied to maintain smooth performance.
- ? Avoid positioning your power supply unit such that the brick is hanging, pulling, or putting unnecessary stress on electrical wires and components.
Support
Thank you for choosing Geeetech. We strive to provide a satisfied and pleasant shopping experience. If you have questions, you can contact us directly or post on our forum; our technical staff will help resolve them. For more detailed information, visit the Geeetech wiki from our homepage: https://www.geeetech.com.
For detailed building instructions, please download at: https://www.geeetech.com/geeetech-prusa-i3-pro-w-3d-printer-diy-kit-p-1014.html
For detailed building videos, please check on YouTube: https://www.youtube.com/playlist?list=PLODCkot3GrigDNAiILi4PDbKfZE41VtgG
Subscribe to our YouTube channel for more videos: https://www.youtube.com/user/geeetech
geeetech 3d printers onlinestore, one-stop shop for 3d printers,3d printer accessories,3d printer parts
geeetech 3d printers onlinestore, one-stop shop for 3d printers,3d printer accessories,3d printer parts
youtube.com/playlist?list=PLODCkot3GrigDNAiILi4PDb
