Geeetech I3 Pro X 3D Printer Assembly Manual
Support
Thanks for choosing Geeetech. We strive to provide a satisfied and pleasant shopping experience. If you encounter any questions while using our product, you can contact us directly or post on our forum. Our technical staff will help you resolve it. For more detailed information, please visit the Geeetech website.
For detailed instructions, please download here: https://goo.gl/LTNGfP
For detailed building videos, please check at YouTube: https://goo.gl/BwjBEu
Subscribe to our YouTube channel for more videos: https://www.youtube.com/user/geeetech
Join our Geeetech 3D printer user club: https://goo.gl/GhJbe3
Feel free to contact us at: technical@geeetech.com.
Copyright Declaration
The copyright of this manual belongs to Shenzhen GETECH CO., LTD. (hereinafter referred to as "Geeetech"), and all rights reserved. No part of this specification should be reproduced or extracted in any forms or means without the prior written consent of Geeetech by any company and individuals.
For More Geeetech Products
If you are interested in 3D printing, flight control, and U-home technologies, welcome to Geeetech. We offer a series of products, main boards, modules, and various peripherals. For relevant information or technical support, please log in to our Forum. To learn more about our new products, please visit www.geeetech.com.
Safety Instructions
Building the printer requires physical dexterity, common sense, and a thorough understanding of the process. Detailed instructions are provided to help you assemble it easily. Please download them at geeetech.com.
Geeetech cannot be held responsible for your health and safety while building or operating the printer. Ensure you are confident with the process before commencing. Read the entire manual to make an informed decision.
Building and operating involves electricity. All necessary precautions should be taken. The printer runs on 12V supplied by a certified power supply. Be aware that high currents can be involved, and even 12V components should be handled with care.
High temperatures are involved with 3D Printing. The extrusion nozzle of the hot end can reach approximately 230°C, and the heated bed can reach 110°C. The molten plastic extruded will initially be around 200°C. Special care and attention should be given when handling these parts during operation.
It is not recommended to leave your printer running unattended until you are confident in its operation. Geeetech cannot be held responsible for any loss, damage, threat, hurt, or other negligent result from building or using the printer.
Introduction
The Geeetech Prusa I3 X is a new member of the prestigious Prusa I3 family, engineered to provide redefined usability, quality, performance, and affordability in the desktop 3D printer market.
The Geeetech Prusa I3 X features a piano-black laser-cut acrylic frame. To maintain a garage-built feel and handmade charm, it is also a DIY kit, offering an unforgettable step-by-step learning experience of building a 3D printer from scratch.
The Geeetech Prusa I3 X is suitable for a wide range of customers, from young to old, professional to amateur. If you have a passion for creativity, this printer is a great choice.
Package List
This list includes all parts required to assemble your Geeetech Prusa I3 X 3D Printer. Please check if all parts are included and in good condition upon receipt. If any parts are missing or damaged during shipping, please contact customer service immediately, providing the NO., Name, and Qty.
Mechanical Parts
| No | Name | Specifications | Qty | Description |
|---|---|---|---|---|
| 1 | Smooth Rod | D8*L322mm Z | 2 | Set of metal rods |
| 2 | Smooth Rod | D8*L430mm X | 2 | Set of metal rods |
| 3 | Smooth Rod | D8*L420mm Y | 2 | Set of metal rods |
| 4 | Threaded Rod | M8*L300mm Z-axis | 2 | Threaded metal rods |
| 5 | Threaded Rod | M10*L450mm Y-axis | 2 | Threaded metal rods |
| 6 | M2.5 Washers | M2.5 | 6 | Small metal washers |
| 7 | M3 Washers | M3 | 139 | Metal washers |
| 8 | M4 Washers | M4 | 44 | Metal washers |
| 9 | M10 Washers | M10 | 12 | Metal washers |
| 10 | Spring washer | M10 | 6 | Metal spring washers |
| 11 | Hex Nut | M2.5 | 6 | Metal nuts |
| 12 | Hex Nut | M3 | 25 | Metal nuts |
| 12 A | Hex Nut | M4 | 44 | Metal nuts |
| 13 | Hex Nut | M10 | 12 | Metal nuts |
| 14 | Lock nut | M4 | 2 | Metal lock nut |
| 15 | Wing nut | M3 | 6 | Metal wing nuts |
| 16 | Square nut | M3 | 58 | Metal square nuts |
| 17 | Z-axis nut | M8 (tin-bronze) | 2 | Brass nut with flange |
| 18 | Hex Countersunk-head screw | M3x16 mm | 2 | Metal screw with flat head |
| 19 | Hex Countersunk-head screw | M3x30 mm | 4 | Metal screw with flat head |
| 20 | Screw | M2.5x16mm | 6 | Metal screws |
| 21 | Screw | M3x8mm | 4 | Metal screws |
| 22 | Screw | M3x12mm | 30 | Metal screws |
| 23 | Screw | M3x16mm | 66 | Metal screws |
| 24 | Screw | M3x20mm | 11 | Metal screws |
| 25 | Screw | M3x25mm | 4 | Metal screws |
| 26 | Screw | M3x30mm | 4 | Metal screws |
| 27 | Screw | M3x35mm | 4 | Metal screws |
| 28 | Screw | M3x50mm | 2 | Metal screws |
| 29 | Screw | M4x12mm | 12 | Metal screws |
| 30 | Screw | M4x16mm | 44 | Metal screws |
| 31 | Screw | M4x25mm | 2 | Metal screws |
| 32 | locking ring | M8 + M5x6mm screw | 6 | Metal locking collar |
| 33 | Spring | 4 x 20 (for heat bed) | 4 | Metal coil spring |
| 34 | Spring | 3.5 x 30(for Z endstop) | 1 | Metal coil spring |
| 35 | Ball Bearing | MR84zz (Placed in No.37) | 4 | Small metal ball bearing |
| 36 | Linear Bearing | PCS8UU | 11 | Plastic and metal bearing component |
| 37 | Driving wheel | 2 | Metal pulley with teeth | |
| 38 | Coupling | 5-8mm | 2 | Metal couplers with set screws and Allen key |
| 39 | Timing Belts | 2GT L=900mm | 2 | Black rubber timing belts |
| 40 | Driven wheel holder | Sheet metal part | 2 | Black plastic bracket |
| 41 | Belt mount | Sheet metal part | 2 | Black plastic mounting piece |
| 42 | Pulley | 20 tooth Inner diameter=5mm | 2 | Metal pulley with teeth |
| 44 | Building platform | aluminium plate | 1 | Flat aluminum plate |
| 46 | Dovetail clamp | 4 | Blue metal clips | |
| 47 | Sticker | 1 | Blue adhesive square | |
| 48 | Heat sink | 9*10*5mm | 4 | Aluminum heat dissipation fin |
| 49 | Spiral Coil | 3 meters | 1 | Coiled plastic tubing |
| 50 | Spacer | With Aircraft type end | 8 | Small plastic component |
| 51 | Nylon ties | 30 | Bundle of white plastic zip ties |
Electronic Parts
| No | Name | Specifications | Qty | Description |
|---|---|---|---|---|
| 52 | End stop | 2-pin Blue,red and black | 1 set | Set of small electronic switches with wires |
| 53 | Thermometry wire | 2pin(attached on heatbed) | 1 | Wire with a sensor tip |
| 54 | Heating Wire | 30cm(soldered on heatbed) | 2 | Red insulated wire |
| 55 | Heatbed | MK2A | 1 | Rectangular red heating element with warning labels |
| 56 | Fan | 40x40x10mm | 1 | Small cooling fan |
| 57 | Extention wire | For the fan On extruder | 1 | Wire harness with multiple colored wires |
| 58 | Power supply Unit | AC Input: 115V/1.5A 230V/0.75A DC Output: 12V/0-15A | 1 | Silver metal power supply box |
| 59 | Power Cable | Connect board to PSU | 1 | Black cable with connectors |
| 60 | 3D Power Cable | With plug | 1 | Black power cable with plug and switch |
| 61 | Extruder | MK8 extruder | 1 | Assembly including motor, gear, and nozzle housing |
| 62 | Control board kit | GT2560+ A4988 | 1 set | Green circuit board with electronic components |
| 63 | Stepper motor | 4 | Black cylindrical motor with wire harness | |
| 64 | LCD 2004 | LCD2004+ cable | 1 | LCD display screen with cable |
| 65 | Knob | For LCD control | 1 | Black rotary control knob |
| 66 | USB cord | A-BA | 1 | USB cable with A and B connectors |
Acrylic Parts
Main Frame
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A1 | Main frame | I3B1-01 | 1 | Large black acrylic panel |
| A2 | Side panel (left hand) | I3B1-02 | 1 | Black acrylic side panel |
| A3 | Side panel (right hand) | I3B1-03 | 1 | Black acrylic side panel |
Z-Axis Motor Mount
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A4 | Motor holder (left) | I3B1-04 | 1 | Black acrylic motor mounting bracket |
| A5 | Motor holder (right) | I3B1-05 | 1 | Black acrylic motor mounting bracket |
Y Axis
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A6 | Motor Holder support | I3B1-06 | 2 | Black acrylic support plate |
| A7 | Motor Holder support | I3B1-07 | 2 | Black acrylic support plate |
| A8 | Z top mount | I3B1-08 | 2 | Black acrylic mounting plate |
| A9 | Y axis Front support | I3B1-09 | 1 | Black acrylic support plate |
| A10 | Y axis Front support | I3B1-10 | 1 | Black acrylic support plate |
| A11 | Y axis Rear support | I3B1-11 | 1 | Black acrylic support plate |
| A12 | Y axis Rear support | I3B1-12 | 1 | Black acrylic support plate |
| A13 | Y motor holder | I3B1-13 | 1 | Black acrylic Y-axis motor mount |
| A14 | Connecting fender | I3B1-14 | 2 | Black acrylic connecting piece |
X Axis Left End
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A15 | Building platform support | I3B1-15 | 1 | Black acrylic support structure |
| A16 | X motor holder | I3B1-16 | 1 | Black acrylic X-axis motor mount |
| A17 | Left bearing top plate | I3B1-17 | 1 | Black acrylic plate for bearing mount |
| A18 | Left bearing bottom plate | I3B1-18 | 1 | Black acrylic plate for bearing mount |
| A19 | X axis rod holder (left) | I3B1-19 | 2 | Black acrylic rod mounting bracket |
| A20 | X axis belt holder | I3B1-20 | 1 | Black acrylic belt mounting bracket |
| A21 | Endstop holder | I3B1-21 | 1 | Black acrylic endstop mounting bracket |
| A22 | Endstop holder | I3B1-22 | 1 | Black acrylic endstop mounting bracket |
X Axis Right End
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A23 | Right bearing holder | I3B1-23 | 1 | Black acrylic bearing holder |
| A24 | Right bearing top/bottom plate | I3B1-24 | 2 | Black acrylic plates for bearing mount |
| A25 | X axis rod holder(right) | I3B1-25 | 1 | Black acrylic rod mounting bracket |
| A26 | X axis driving wheel support holder | I3B1-26 | 1 | Black acrylic support for driving wheel |
Others
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A27 | X axis Fender | I3B1-27 | 2 | Black acrylic fender component |
| A28 | Z endstop mount | I3B1-28 | 1 | Black acrylic Z-axis endstop mount |
Extruder Carriage
| No | Name | Model | Qty | Description |
|---|---|---|---|---|
| A29 | X asix bearing support plate | I3B1-29 | 1 | Black acrylic support plate for extruder carriage bearings |
| A30 | Extruder Braket | I3B1-30 | 1 | Black acrylic bracket for extruder assembly |
| A31 | extruder bracket support | I3B1-31 | 2 | Black acrylic support for extruder bracket |
Free Add-on
| No | Name | Specifications | Qty | Description |
|---|---|---|---|---|
| 1 | Ejector pin | 1 | Thin metal rod | |
| 2 | Grater | 1 | Metal rod with a serrated end | |
| 3 | Screw-drivers | 1 | Set of screwdrivers and Allen keys | |
| 4 | Starter filament | 3 meters | 1 | Green spool of 3D printer filament |
| 5 | Spool holder set | Acrylic | 1 | Acrylic components for a spool holder assembly |
*The acrylic plate for the spool holder and the LCD frame are 5mm.
General Care and Maintenance
As with all electronic equipment, it is important to keep your printer clean to extend its life. Regularly remove dust and debris with a microfiber cloth or compressed air. Clean the tube and the nozzle after each use to ensure fluent performance.
- Do not leave the heaters on the printer turned on for long periods when not used.
- Do not leave your printer in shady and moist places, which may exacerbate problems associated with erosion.
- The three axes of the Geeetech I3 Pro B are lubricated with grease for smooth operation and can last for a long time. Grease may need to be re-applied to maintain smooth performance.
- Avoid positioning your power supply unit in such a way that the brick is hanging, pulling, or putting unnecessary stress on the electrical wires and components.
geeetech 3d printers onlinestore, one-stop shop for 3d printers,3d printer accessories,3d printer parts
geeetech 3d printers onlinestore, one-stop shop for 3d printers,3d printer accessories,3d printer parts
null - YouTube
Geeetech - YouTube
