Manuals+

FUJIFILM GFX 100 New Features Guide

Version 4.10

Features added or changed as a result of firmware updates may no longer match the descriptions in the documentation supplied with this product. Visit our website for information on the updates available for different products:

https://fujifilm-x.com/support/download/firmware/cameras/

Firmware Version 4.10 Updates

GFX100 firmware version 4.10 adds or updates the features listed below. For the latest manuals, visit the following website:

http://fujifilm-dsc.com/en/manual/

No.DescriptionGFX100 [manual]See [see]Ver.
1RAW (ATOMOS) and RAW (Blackmagic) options have been added under F-Log/HLG/RAW RECORDING in the movie menu.16814.10

Changes and Additions: F-Log/HLG/RAW RECORDING

Changes and additions are as follows.

GFX100 Owner's Manual Reference: Page 168, Version 4.10

Choose the destination for F-Log, HLG (Hybrid Log-Gamma), or RAW movies shot while the camera is connected to an HDMI device.

OptionDescription
[internal storage] / [HDMI output]The footage is processed using film simulation and both saved to the memory card and output to the HDMI device.
[internal storage] F-Log / [HDMI output] F-LogThe footage is recorded to the memory card and output to the HDMI device in F-Log format.
[HDMI output] F-Log / [internal storage] (with film simulation)The footage is output to the HDMI device in F-Log format but saved to the memory card with film simulation applied.
[internal storage] F-Log / [HDMI output] (with film simulation)The footage is recorded to the memory card in F-Log format but output to the HDMI device with film simulation applied.
[internal storage] HLG / [HDMI output] HLGThe footage is recorded to the memory card and output to the HDMI device in HLG format.
[HDMI output] RAW (ATOMOS) / [internal storage] (with film simulation)The footage is output to Atomos video recorders in RAW format but saved to the memory card with film simulation applied.
[internal storage] F-Log / [HDMI output] RAW (ATOMOS)The footage is recorded to the memory card in F-Log format and output to Atomos video recorders in RAW format.
[internal storage] HLG / [HDMI output] RAW (ATOMOS)The footage is recorded to the memory card in HLG format and output to Atomos video recorders in RAW format.
[HDMI output] RAW (Blackmagic) / [internal storage] (with film simulation)The footage is output to Blackmagic Design video recorders in RAW format but saved to the memory card with film simulation applied.
[internal storage] F-Log / [HDMI output] RAW (Blackmagic)The footage is recorded to the memory card in F-Log format and output to Blackmagic Design video recorders in RAW format.
[internal storage] HLG / [HDMI output] RAW (Blackmagic)The footage is recorded to the memory card in HLG format and output to Blackmagic Design video recorders in RAW format.

Detailed Explanations

  • F-Log offers a gentle gamma curve with a wide gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 800 and ISO 12800.
  • The HLG (Hybrid Log-Gamma) recording format conforms to the international ITU-R BT2100 standard. When viewed on HLG-compatible displays, high-quality HLG footage faithfully captures high-contrast scenes and vivid colors. Sensitivity is restricted to values between ISO 1250 and ISO 12800. HLG recording is available when MOV/H.265(HEVC) LPCM is selected for [MOVIE SETTING] > FILE FORMAT in the shooting menu.
  • [Film simulation] footage is recorded using the option selected for [MOVIE SETTING] > [FILM SIMULATION] in the shooting menu.
  • Footage shot with [internal storage] F-Log or [internal storage] F-Log [HDMI output] cannot be recorded to the memory card and output to the HDMI at different frame sizes (4K, Full HD). In addition, the following [MOVIE SETTING] options are unavailable:
    • MOVIE MODE frame rate options of 59.94P and 50P
    • 4K INTERFRAME NR
    • HDMI OUTPUT INFO DISPLAY
  • RAW (ATOMOS) is used for output RAW footage to Atomos video recorders.
  • RAW (Blackmagic) is used for output RAW footage to Blackmagic Design video recorders.
  • RAW output cannot be recorded to the memory card.
  • In-camera image enhancements are not applied to the RAW output.
  • The crop (picture angle) and quality of footage output to external devices differs from that shown in the camera monitor. View footage output using RAW (ATOMOS) or RAW (Blackmagic) on the external device.
  • Footage output to external devices is generated from the original RAW data and its quality, which varies with device specifications, may not be equal to that achieved as the end result of post-production or the like.
  • Focus zoom is not available when RAW (ATOMOS) or RAW (Blackmagic) is selected for HDMI output.
  • RAW footage output via HDMI to incompatible devices will not display correctly but will instead display as a mosaic.
  • The minimum and maximum sensitivities for [film simulation], F-Log, or HLG footage recorded to the memory card when RAW (ATOMOS) or RAW (Blackmagic) is selected for HDMI output are ISO 1250 and ISO 12800, respectively.

Company Information

FUJIFILM Corporation

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

https://fujifilm-x.com

Supported Technologies: [SDXC II], [Wi-Fi CERTIFIED], [Wi-Fi PROTECTED SETUP], [Exif Print], [HDMI], [Bluetooth]

Models: GFX 100, Digital Camera

File Info : application/pdf, 6 Pages, 129.82KB

PDF preview unavailable. Download the PDF instead.

gfx100 v40 nfg en s f

References

Related Documents

Preview Fujifilm GFX 100 II New Features Guide - Firmware Updates and Enhancements
Explore the new features and firmware updates for the Fujifilm GFX 100 II digital camera. This guide details enhancements in F-Log/HLG recording, time code synchronization, Frame.io integration, remote recording capabilities, and firmware update procedures.
Preview FUJIFILM GFX 100 II New Features Guide: Firmware 1.20 Updates
Details new features for the FUJIFILM GFX 100 II digital camera with firmware 1.20, including remote recording display updates like 4-screen view, clean display mode, and priority settings, plus menu options. Visit FUJIFILM for latest manuals.
Preview FUJIFILM GFX 100RF Series New Features Guide
A guide detailing new features, updates, and changes for the FUJIFILM GFX 100RF series cameras, including firmware version 1.10. Learn about Bluetooth connectivity, instax printer support removal, and pairing procedures.
Preview Fujifilm GFX 100S II New Features Guide - Firmware v1.20
Learn about the new features, additions, and changes in the Fujifilm GFX 100S II digital camera with firmware version 1.20, including smartphone connectivity updates.
Preview Fujifilm GFX 100RF New Features Guide
This guide details the new features, additions, and updates for the Fujifilm GFX 100RF digital camera, specifically focusing on firmware version 1.10. It covers changes to wireless connectivity, instax printing, and smartphone pairing.
Preview Fujifilm GFX 100RF Firmware Update Guide
This guide details the new features, additions, and eliminations in firmware version 1.10 for the Fujifilm GFX 100RF digital camera, focusing on connectivity and menu changes.
Preview Fujifilm GFX 100RF New Features Guide - Firmware Version 1.10
This guide details the new features, additions, and changes in the Fujifilm GFX 100RF digital camera firmware version 1.10. It covers updates to wireless communication, instax printer connectivity, and smartphone pairing procedures.
Preview FUJIFILM GFX 100 II: Manual Básico
Guía completa para la cámara digital FUJIFILM GFX 100 II, cubriendo desde los primeros pasos hasta funciones avanzadas de captura, video y conectividad. Acceda a recursos adicionales en línea.