Fujifilm GFX 100RF: Firmware Version 1.10 New Features Guide
This guide outlines the changes introduced in firmware version 1.10 for the Fujifilm GFX 100RF digital camera. Some added or modified functions due to firmware updates may not align with the descriptions in the product's documentation. For the latest manual version, please visit: https://fujifilm-dsc.com/en-int/manual/
Important Note: A firmware update will reset the "CONNECTION MODE" setting in the "Network/USB Setup" menu to its default if "TETHERED SHOOTING" is selected. Please reconfigure settings according to the external device you intend to connect.
Content Summary of Changes
| No. | Description | Consultation | Version |
|---|---|---|---|
| 1 | Wireless communication (COMUNIC. INALÁMBRICA) has been removed from "SHOOTING MODES SETUP", "FILM SIMULATION", and "PLAYBACK MENU". | — | — |
| 2 | Instax instant printing (IMPRESIÓN IMPR. instax) has been removed from "PLAYBACK MENU". | — | — |
| 3 | The pairing procedure between the camera and smartphone has changed. | 1 | 1.10 |
| 4 | Wireless connection setup (CONF.CONEX.IMPR. instax) has been removed from the "Network/USB Setup" menu. | — | 1.10 |
| 5 | Wireless communication (COMUNIC. INALÁMB.) has been removed from assignable functions in "BUTTON/DIAL SETUP" > "FUNC. (Fn) SETUP". | — | — |
| 6 | Wireless communication (COM. INALÁMBRICA) has been removed from "BUTTON/DIAL SETUP" > "BUTTON CONFIGURATION" Fn1. | — | — |
| 7 | Fujifilm "instax SHARE SP-1/SP-2/SP-3" printers are no longer compatible. | — | — |
Changes and Additions: Connecting to a Smartphone (Ver. 1.10)
Pair your camera with your smartphone and connect via Bluetooth®.
- Press DISP/BACK while shooting information is displayed.
Illustration showing the DISP/BACK button and a Bluetooth icon with an upward arrow. Alternatively, you can proceed directly to step 3 by pressing and holding the DISP/BACK button during playback.
- Select "Bluetooth" and press MENU/OK.
Screenshot showing the camera menu with "Bluetooth" highlighted. - Select "PAIRING" and press MENU/OK.
Screenshot showing the "PAIRING" option selected within the Bluetooth menu. - Launch the smartphone application and pair it with the camera. A code will appear on the smartphone and the camera. Confirm that both codes match to pair them.
A smartphone icon and a white Bluetooth icon will appear on the camera screen when a connection is established.
Screenshot showing a smartphone icon and a Bluetooth icon on the camera display, indicating a successful connection. - Once devices are paired, the smartphone will automatically connect to the camera when the application is launched.
- Disabling Bluetooth when the camera is not connected to a smartphone reduces battery drain.
MEMO
This section is intended for notes.
