Parkside Cordless Fan 20V PVA 20 LI-B1
User Manual
Introduction
Congratulations on the purchase of your new Parkside product. This user manual is an integral part of the product and contains important information regarding safety, use, and disposal. Please familiarize yourself with all safety information and operating instructions before using the product. Use the product only as described and for the specified applications. If passing the product on to another person, ensure all documentation is included.
Intended Use
- This product is intended for general ventilation in most household areas.
- Use the product only as described and for the specified applications.
- The product is not intended for commercial use.
- Any other usage or modification of the product is deemed improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.
Scope of Delivery
- 1 Cordless Fan
- 1 User manual
Parts List
Before reading, unfold the pages containing the illustrations and familiarize yourself with all the functions of the product.
(Fig. A, B, C)
- [1] Adjustable fan head with carrying handle
- [2] Carrying handle
- [3] Stand with 8-stage setting (120°)
- [4] Battery slot
- [5] Battery pack *
- [6] Release button for the battery pack
- [7] Battery display LED
- [8] Battery charge level button
- [9] Hook
- [10] On/off switch (Speed level 1 and 2)
- [11] Charger *
- [12] Red charge control LED
- [13] Green charge control LED
- [14] Power cord with power plug
* Battery pack and charger are not included in the scope of delivery.
Technical Data
Rated voltage: | 20 V (DC) |
Speed setting 1: | n₀ 1,400 min⁻¹ |
Speed setting 2: | n₀ 2,100 min⁻¹ |
Operating time at speed level 1: | approx. 7.5 h (2 Ah battery pack), approx. 15 h (4 Ah battery pack), approx. 30 h (8 Ah battery pack) |
Operating time at speed level 2: | approx. 3.5 h (2 Ah battery pack), approx. 7 h (4 Ah battery pack), approx. 14 h (8 Ah battery pack) |
Rotor blade diameter: | approx. 180 mm |
No. of rotor blades: | 3 |
Total diameter: | approx. 230 mm |
Battery pack PAP 20 A3
Type: | Lithium-ion |
Rated voltage: | 20 V (DC) |
Capacity: | 4000 mAh/80 Wh |
Cells: | 10 |
High-speed battery charger PLG 20 C2
Input
Rated voltage: | 230–240 V~, 50 Hz (AC) |
Rated power consumption: | 85 W |
Fuse (internal): | 3.15 A [T3.15A] |
Output
Rated voltage: | 21.5 V (DC) |
Rated current: | 3.5 A |
Charging time: | approx. 80 min |
Protection class: | II / [double insulation] |
Noise emission value
The measured values have been determined in accordance with EN IEC 60704-2-7:2020. The A-rated noise level of the product is typically as follows:
A-rated noise level
Sound pressure level LpA: | 53.3 dB (A) |
Uncertainty KPA: | 2.5 dB |
Sound power level LWA: | 65.4 dB (A) |
Uncertainty KWA: | 2.5 dB |
General Safety Notes
[!] WARNING! Danger to life and risk of injury!
Read all safety warnings, instructions, illustrations and specifications provided with this product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
- This product may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the product safely and are aware of the potential risks. Do not allow children to use the product as a toy. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
- Do not expose the product to rain.
- Store the product indoors only.
- Do not use the product as a toy. Special care must be taken when the product is used by or near children.
- Use the product only as described in this user manual.
- Do not use the product if the battery pack is damaged. Contact customer service if the product is not working properly, has been dropped, left outdoors or dropped into water.
- If the product has been dropped, check it carefully for cracks or damage before use.
- Do not use the product if it is damaged, bent or cracked. Stop using the product immediately if it appears to be damaged in any way or is operating abnormally.
- Check the product for damage and defects before every use.
- Do not touch the product with wet hands.
- Do not insert any objects into the openings of the product.
- Keep hair, loose clothing, fingers and all other parts of the body away from the openings and moving parts.
- Switch off the product before removing the battery pack.
- Only use the charger recommended by the manufacturer. Accessories that may be suitable for one particular cordless fan may no longer be safe if used with other cordless fans.
- Do not charge the battery pack outdoors.
- Do not expose the product to fire or high temperatures.
- Do not use the product near naked flames, smouldering ashes or explosive substances, e.g. in the presence of flammable liquids, gases or dust. The product may generate sparks that can ignite dust or fumes.
- Do not use this product to blow off hazardous or explosive materials and fumes. The product is intended for general ventilation only.
- Switch the product off immediately if you notice anything unusual.
- Do not leave the product unattended when it is switched on.
- Before removing the guard, switch off the product and remove the battery pack.
Safety Guidelines for Battery Chargers
This appliance may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks. Do not allow children to use the appliance as a toy. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
The charger is suitable for indoor use only.
To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their customer service department or a similarly qualified person.
[!] WARNING! Danger to life!
Do not operate the appliance with a damaged power cord or power plug. Damaged power cords can result in danger to life due to electric shock.
First Set-up of the Product
Unpacking the product and basic cleaning
- Take the product out of the packaging and remove all packaging materials and plastic wrappings.
- Check to make sure that all listed parts are included (see "Scope of delivery").
- Check whether the product and all parts are in good condition. If any damage or defect is detected, do not use the product, but follow the procedure described in chapter "Warranty".
Charging the battery pack
(Fig. B, C)
[!] NOTICE! Risk of property damage!
- Always disconnect the power plug [14] before removing or inserting the battery pack [5] from the charger [11].
- Do not charge the battery pack [5] if the ambient temperature is below +10 °C or above +40 °C.
- Insert the battery pack [5] into the charger [11].
- Insert the power plug [14] into the socket outlet. The control LED [12] lights up red.
- The green control LED [13] indicates that the charging process is complete and the battery pack [5] is ready for use.
NOTE:
- If the red control LED [12] flashes, the battery pack [5] is overheated and cannot be charged.
- If the red [12] and green control LED [13] flash simultaneously, the battery pack [5] is defective.
Inserting/removing the battery pack
Inserting the battery pack
- Push the battery pack [5] into the product. Snap the battery pack into the battery slot [4].
Removing the battery pack
- Press the release button [6] and remove the battery pack [5].
Checking the battery charge level
- Press the battery charge level button [8] to check the battery status.
- The battery charge level is shown on the battery display LED [7] as follows:
Display LED | Battery charge level |
---|---|
Red + Orange + Green | maximum battery charge level |
Red + Orange | medium battery charge level |
Red | low battery charge level (Charge the battery pack [5].) |
Operation
Switching on/off
Status | Speed level | Position of the on/off switch |
---|---|---|
On | 1 | I |
2 | II | |
Off | - | 0 |
Adjusting the fan head
- Turn the fan head [1] to the desired position. There are 8 setting options available.
Carrying handle
- Carry and transport the product by the carrying handle [2].
Fastening hook
- Fold the hook [9] out of the stand [3] so that you can attach it to a suitable place, such as a wall hook.
Cleaning and Maintenance
Original accessories
Customers from DK (Denmark), BE (Belgium) & NL (Netherlands) can obtain compatible replacement batteries and chargers from the LIDL online shop www.lidl.de. Customers from GB (Great Britain), IE (Ireland) & NI (Northern Ireland) via www.optimex-shop.com.
- Only use accessories that are specified in the user manual. The use of accessories that are not recommended in the user manual may pose a risk of injury to you.
Cleaning
[!] WARNING! Risk of injury!
- Switch off the product and remove the battery pack [5] before carrying out any work on the product.
- Never allow liquids to get into the product or the accessories (battery pack, charger).
- Use a damp cloth to clean the housing. Never use petrol, solvents or cleansers which can damage plastic.
- If a lithium-ion battery pack is going to be stored for an extended period, the charge level should be checked regularly. The optimum charge level is between 50% and 80%. The optimum storage environment is cool and dry.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics/20-22: paper and fibreboard/80-98: composite materials.
Product: Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
EU Declaration of Conformity
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
- Directive 2006/42/EC
- Directive 2014/30/EU
- Directive 2011/65/EU and all related amendments
References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:
N°/Parts | Directive 2006/42/EC |
---|---|
EN 62233:2008 | |
EN ISO 12100:2010 | |
EN 60335-1:2012/A15:2021 | |
EN 60335-2-80:2003/A2:2009 |
N° / Parts | Directive 2014/30/EU |
---|---|
EN IEC 55014-1:2021 | |
EN IEC 55014-2:2021 |
The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment:
N° / Parts | |
---|---|
EN IEC 63000:2018 |
Keeper of the technical documentation: OWIM GmbH & Co.KG
Signed for and on behalf of:
OWIM GmbH & Co. KG, Stiftsbergstraße 1, 74167 Neckarsulm, Germany
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Warranty
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.
Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.
Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts.
This warranty becomes void if the product has been damaged, or used or maintained improperly.
The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
- Please have the till receipt and the item number (IAN 445998_2307) available as proof of purchase.
- You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
- If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
- You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
Service
Service Great Britain
Tel.: 0800 0569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
Service Northern Ireland
Tel.: 0800 0927852
E-Mail: owim@lidl.ie