Lumena SOLLUX Solar Spike Light (Remote Control)
User Manual
Thank You
Thank you for your purchase. Please read these instructions carefully prior to installation/maintenance.
Specifications
Wattage: 25W, 60W, 120W
Lamp: In-built Sanan 5730 LEDs (120° Beam Angle)
Colour Temperature: 6500K (Daylight)
Lumen Output: 500 lm, 1200 lm, 2400 lm
LED Life Expectancy: Up to 50,000 hours
Sensor: Light Sensor
IP Rating: IP67
Battery Type: Lithium 36250 LifePO4 (replaceable)
Battery Specifications:
- 25W: 3.7V 6AH
- 60W: 3.7V 820AH
- 120W: 6.4V 30AH
Battery Charge Time: 5-6 hours (approx.)
Solar Panel: Polycrystalline
- 25W: 6V 10W
- 60W: 6V 18W
- 120W: 12V 30W
Max Illumination Time at Full Charge: 12-14 hours (varies by function)
Illumination Area:
- 25W: 80 sq.m
- 60W: 120 sq.m
- 120W: 150 sq.m (approx.)
Cable Length: Solar Panel: Over 4m // Flood Light: 0.3m approx. (plug & play adaptor)
Materials: Aluminium Alloy, Die Cast Aluminium, Tempered Glass
Mounting: Surface mount (adjustable brackets), spike mount
Remote Control: Infrared (up to 20m range) – requires 2 x AAA batteries (included)
Working Temperature: -25°C to 60°C
Included:
- Flood Light with Bracket
- Solar Panel
- Solar Panel Bracket (packed separately)
- 4 Ground Spikes (2 x solar panel & 2 x floodlight)
- Solar Panel Bracket Fixings
- 2 x Allen Key
- Remote Control & Batteries
Accessories: 5m extension cable available.
Certifications & Guarantees: [RoHS compliant symbol], [CE marking symbol], 3 Year Guarantee (see website for more details).
Warnings ⚠️
- If a fitting is found to be damaged, cease use immediately.
- The unit may get warm whilst on for a period of time.
- Always take care when installing your solar light, especially when mounting it in high places.
- Ensure the fitting is mounted out of range of head height to avoid injury.
- Fitting must be mounted to a solid surface.
- This Solar Light will not charge correctly if the panel is behind glass or artificial light is used.
Cleaning & Maintenance
Occasional cleaning and care are recommended for this product. Wipe with a soft, slightly damp cloth to remove any surface dirt. To maintain efficiency, specifically clean the solar panel and glass flood light lens on a regular basis. Also, keep the solar panel free of debris and snow to prevent reduced battery life or malfunction. Do not use abrasive cleaners or a lot of water as this could damage the fitting. Please refer to the Lumena website for more information on the best way to clean different materials.
Returns
If purchased from a 3rd party, please contact your supplier. If purchased direct from Lumena Lights Ltd, contact them by phone or email:
Lumena Lights Ltd
Centre 33 Long March, Daventry, NN11 4NR
Tel: +44 1327 871161
Email: sales@lumenalights.com
Lumena's full returns policy is available on their website.
Disposal
Waste Electrical Products should not be disposed of with household waste. Please check with your local authority or contact Lumena Lights Ltd for more information. Please recycle packaging whenever possible.
Producer Registration Numbers: WEE/KC3440XY / BPRN0843
Installation
The SOLLUX is designed to be mounted into soft ground via the 2x aluminium spike supports, with the solar panel located up to approximately 4.5m away to ensure maximum light exposure. The panel can be surface mounted or spike mounted into soft ground. It is ideal as an up light for larger trees. A 5m extension cable is available to extend the distance between the solar panel & flood light, which may increase the charging time slightly.
Location
It is important that the installation location of the solar panel is carefully considered, avoiding shady areas. The best position for the solar panel is south facing; however, it will still charge the battery when facing in other directions, especially when in full sunshine. Ensure there are no other lights which could interfere with the light sensor, imitating daylight.
Installation Steps
- Plug the flood light into the solar panel and secure in place by screwing on and fully tightening the cap.
- Attach the white mounting bracket to the solar panel with the 2 x socket screws, washer, and nut provided (washer & nut on outside of panel).
- Experiment with the desired position of both the flood light and solar panel, ensuring there is enough slack in the cable to safely hook up when they are mounted in the desired location.
- Once happy with the positioning, follow the relevant installation method below:
Spike Mount
a. Attach 2 x ground spikes to the outer mounting holes of the floodlight bracket via the stainless steel screw and washer provided with each spike.
b. Dampen the soil in the desired location and push the spikes into the ground evenly to secure in place. A rubber mallet may be used if required. Only apply pressure to the spikes.
c. Attach the ground spikes to the outer mounting holes of the solar panel bracket and mount in position as per above.
Description of Spike Mount diagram: Illustrates attaching ground spikes to the floodlight and solar panel brackets, and then inserting them into the ground. Surface Mount (Panel Only)
a. Mark the mounting holes of the solar panel bracket in the desired location.
b. Drill out the holes and use relevant screws / plugs for the mounting surface (not included) and secure the solar panel bracket in place.
c. Attach the solar panel to the bracket with the 2 x socket screws, washer, and nut provided (shorter screws located in battery pack to substitute longer panel screws). Position washer and nut on the outside of the bracket – hold the allen key inside the socket screw and tighten the nut with a spanner.
Description of Surface Mount diagram: Shows marking and drilling holes for the solar panel bracket on a surface, and then attaching the solar panel to the bracket. - Adjust the angle of the solar panel & flood light, as desired, and tighten into position with the allen keys provided. Adjust the solar panel to approximately 45 degrees for maximum charge effectiveness.
- Check the waterproof cable connector is secure and the cable is in a safe position.
- Press the dusk to dawn button on the remote to activate the dusk to dawn setting & test the flood light (batteries will need to be inserted).
Modes / Settings
Note: When the remote is turned "ON", the previous setting will be remembered. Timer setting will start instantly, regardless of daylight.
Digital Display: Shows Battery Charge Percentage.
Before use, insert the batteries into the remote control.
For first use, press the "AUTO" button on the solar light control panel to activate the light and remote.
To switch between modes, select the relevant button for the desired setting after installation.
Modes can be changed via the remote control, up to 20m range.
The "ON" button will remember the previous mode set, and "OFF" will be overruled the following evening.
The remote control can command more than one fitting in range.
The infra-red sensor is located in the bottom left corner of the flood light lens.
Further Information
Full product range & more information: www.lumenalights.com
