Halo Design 730018 Product Information Sheet
Compliant with COMMISSION DELEGATED REGULATION (EU) 2019/2015 on the energy labelling of light sources.
Supplier Information
Supplier Name or Brand: Halo Design
Supplier Address: Energimærkning, Gammelgårdsvej 85, 3520 Farum, DK
Model Designation: 730018
EPREL Registration Number: 866172
Model placed on the Union market from: 17/08/2021
Light Source Type
| Lighting technology used: | LED | Non-directional or directional: | DLS |
| Light source cap type (or other electrical interface): | 1 | Connected light source (CLS): | No |
| Mains-connected light source or non-mains-connected light source: | MLS | Light source with colour tuning: | No |
| High-lumen light source: | No | Can be used with a dimmer: | Yes |
| Glare-free light source: | No | Outer dimensions (mm): | Height: 290, Width: 300, Depth: 300 |
General Product Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Energy consumption in on-mode (kWh/1000 h), rounded up to the nearest integer | 18 | Energy efficiency class | F |
| Useful luminous flux (ouse), with indication of flux in a sphere (360°), wide beam (120°), or narrow beam (90°) | 1 600 in Wide beam (120°) | Correlated colour temperature, rounded to the nearest 100 K, or range of correlated colour temperatures that can be set | 3 000 |
| Power in on-mode (Pon), expressed in W | 18.0 | Power in standby mode (Psb), expressed in Watts and rounded to two decimal places | 0.00 |
| Power in network standby mode (Pnet) for connected light source, expressed in Watts and rounded to two decimal places | - | Colour rendering index (CRI), rounded to the nearest integer, or scale of CRI values that can be set | 80 |
Spectral Power Distribution
The spectral power distribution describes how the light source emits power across different wavelengths of light, from 250 nm to 800 nm at full load. The graph on page 3 illustrates this for various light source technologies:
- Halogen: Shows a broad, smooth curve peaking in the red/infrared region.
- Fluorescent: Displays distinct peaks in the blue, green, and yellow/orange parts of the spectrum.
- LED (RGB): Characterized by sharp, narrow peaks in the red, green, and blue regions, indicating precise colour generation.
- LED (PC): Presents a broader spectral distribution with a significant peak in the blue region and a wider hump extending through the green, yellow, and red parts of the spectrum.
Parameters for Directional Light Sources
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Peak luminous intensity (cd) | 1 | Beam angle in degrees, or range of beam angles that can be set | 1 |
Parameters for LED and OLED Light Sources
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| R9 value for colour rendering index | 1 | Lifetime factor | 1.00 |
| Luminous flux ratio | 1.00 | Consistent colour rendering in MacAdam ellipses | 1 |
Parameters for Mains-Connected LED and OLED Light Sources
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Power factor (cos φ1) | 1.00 | Statement that a LED light source replaces a fluorescent light source without integrated ballast with a certain power | - |
| If yes, stated replaced power (W) | - | Flicker measure (Pst LM) | 1.0 |
| Stroboscopic effect measure (SVM) | 1.0 |
Customer Care and Contact
Customer care service:
- Name: Energimærkning
- Email: mw@halodesign.dk
Address: Gammelgårdsvej 85, 3520 Farum, Danmark
Website: www.halodesign.dk
Phone: 21820051
EPREL Information: https://eprel.ec.europa.eu/qr/866172
