Instruction Manual
Product Models
- Halo - løs fatning Sort E27 (Loose fitting Black E27)
- Halo - løs fatning Antik messing E27 (Loose fitting Antique Brass E27)
- Halo - fatning Silver E27 (Fitting Silver E27)
Assembly Diagrams Explained
The diagrams provide a visual guide for assembling the Halo E27 lamp holder.
Main Lamp Holder Illustration: A cylindrical lamp holder with a cross-hatched texture. Callout '1' indicates the lower part, and callout '2' indicates the upper part.
Assembly Sequence 1 (Top Right): Shows the lower part (labeled '1') being inserted into the upper part (labeled '2').
Assembly Sequence 2 (Bottom Right): Details the assembly process:
- Step 1: The lower part (labeled '1') is shown connecting to the socket component (labeled '2').
- Step 2: Wire connection terminal (labeled '3') is shown.
- Step 3: A cable grip or strain relief (labeled '4') is depicted.
- Step 4: A power plug (labeled '5') is presented.
- Step 5: The fully assembled lamp holder, ready for a light bulb (labeled '6').
Installation Instructions
- Follow the provided instruction sketch.
- Ensure the power supply to the outlet is OFF before starting the installation.
- Insert the light bulb into the socket.
- Complete steps 1 and 2 of the assembly before connecting the lamp to the power source.
Electrical Specifications: 230V, E27 socket, Maximum 40W.
Safety and Compliance Marks: ⚡ [power symbol], CE, [Class II protection], [indoor use symbol]
