VIDEX LED Dimmable Desk Lamp
Model: VLE-TF05W-RGB
Product Overview & Features
This LED desk lamp offers adjustable color temperature (warm, neutral, cold white), dimmable brightness (five-step), and an integrated clock with alarm functionality. It also features RGB illumination.
Key Specifications:
- Rated Voltage/Frequency: 100-240V ~50Hz
- Rated Power: 7.5W
- Rated Luminous Flux: 300 Lm (luminaire), 490 Lm (light source 360°)
- Color Rendering Index (CRI): Ra ≥ 80
- Nominal Lifetime: 30,000 hours
- Working Temperature: -10°C to +40°C
- Protection: IP20 rating, Protection against solid foreign objects > 12mm
- Flicker: No perceptible flicker to the human eye
- Insulation Class: Class II, Class III
- Safety: Short-circuit-proof safety isolating transformer
- Light Source: Non-replaceable LED
- Control Gear: Can work independently, can be replaced by end-user
Product Purpose and Application
This product is designed for home use and similar general applications.
Installation Instructions
Before the first use, verify that the lamp housing, cable, and adapter are not damaged (See Figure 1: Lamp housing, cable, and adapter connection).
Connect the cable to the lamp's power connector and the adapter, then connect to the power supply and turn on the lamp (See Figure 2: Connecting cable to lamp, adapter, and power supply).
Operation Modes
1. Standard Mode: Displays temperature, time, and date (See Figure 3: Standard mode display).
2. Alarm Mode: Allows setting wake-up time and selecting an alarm signal (See Figure 4: Alarm mode display).
Detailed Operation
After installing the battery, the display operates in standard mode.
Setting Clock and Calendar:
- Press and hold the 'Set' button for two seconds to set clock and calendar functions (See Figure 5: Setting clock/calendar).
- Use the 'Up' and 'Down' buttons to set the hour value (See Figure 6: Setting hour).
- Short press 'Set' to switch to minute value setting (See Figure 7: Switching to minutes).
- In standard mode, press 'Down' to select thermometer unit system (°C/°F) (See Figure 8: Selecting thermometer units).
- Press 'Mode' to complete standard mode settings (See Figure 9: Completing standard mode settings).
- Press 'Up' to select 12-hour or 24-hour time display (See Figure 10: Selecting 12/24 hour format).
Setting Alarm:
- Press 'Mode' to switch from standard mode to alarm mode (See Figure 11: Switching to alarm mode).
- Setting the alarm time is similar to setting the clock (See Figure 12: Setting alarm time).
- Set the interval for signal repetitions (1-60 minutes) and select alarm melody (See Figure 13: Setting alarm repeat interval).
- Press 'Down' in alarm mode to activate the alarm at the set time (See Figure 14: Activating alarm).
- Press 'Down' to repeat the alarm (snooze) (See Figure 15: Repeating alarm).
- Press 'Set' to turn off the alarm signal (See Figure 16: Turning off alarm).
Touch Controls (See Figure 17: Touch buttons):
- Button (M): Change color temperature (warm white, neutral white, cold white).
- Power Button: Switch ON/OFF [Power].
- '+' Button: Increase brightness (five-step).
- '-' Button: Decrease brightness (five-step).
- RGB Button: Activate RGB illumination [RGB].
Functional Characteristics
This product is for indoor use only.
Maintenance & Safety Instructions
Perform maintenance only when the power is OFF and the product has cooled down. Clean with soft, dry cloths only. Do not use chemical detergents. Do not cover the product. Ensure free air access.
The LED product may heat up. The light source is non-replaceable. The entire luminaire must be replaced if the light source is damaged. Dispose of used or damaged products according to applicable regulations.
Failure to follow these instructions may result in fire, burns, electric shock, or injury. Allegro Opt Sp. z o.o. is not responsible for damages resulting from non-compliance. The manufacturer reserves the right to make changes to the manual.
Environmental Protection
In accordance with WEEE regulations, do not dispose of this electronic equipment with general waste. Return it to a designated collection point. The equipment contains no hazardous components.
Manufacturer and Importer Information
Producer: Allegro-opt PE, Ukraine.
Importer (Poland): Allegro Opt Sp. z o.o., Krakow, Poland.
Manufactured in China.
