Power Line Conducted Emissions Test Setup
This section documents the test configuration for measuring power line conducted emissions. The Sagemcom FAST5260 home router is positioned on a light-colored wooden table. Cables extend from the router to a white test unit, which is then connected to larger test equipment situated on the floor. The setup is depicted within a laboratory environment.
Radiated Field Strength Test Setup (Frequency < 1 GHz)
This part illustrates the test arrangement for radiated field strength measurements below 1 GHz. The Sagemcom FAST5260 router is placed on a large, flat, white surface, supported by a wheeled base. This assembly is located inside a specialized testing enclosure, characterized by its domed or semi-circular structure, indicative of an anechoic or controlled RF environment.
A second view shows the router, which features a small display screen, connected via cables to measurement instruments. The router remains on the elevated white platform within the testing chamber.
Radiated Field Strength Test Setup (Frequency > 1 GHz)
This section details the test setup for radiated field strength measurements above 1 GHz. The Sagemcom FAST5260 router is elevated on a multi-tiered wooden structure, which is itself placed upon the previously mentioned white platform. This entire configuration is situated within the domed testing chamber to ensure accurate electromagnetic measurements.
