Mirrored Jewelry Cabinet

Important Safety Information & Preparation

Preparation:

• Please read all instructions carefully and retain them for future reference.
• Separate and count all parts and hardware before assembly.
• We recommend assembling the product near its intended use area to avoid unnecessary movement once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials away from babies and children, as they can pose a serious choking hazard.

Safety Precautions:

• Ensure all screws are securely tightened, but do not overtighten.
• Do not place the product near fire or high temperatures.
• Children are not allowed to climb or push the product.

Operation: Requires 3 x AA 1.5V batteries (not provided).

Return and Damage Claim Instructions:

• Important: Do not discard the original box or packaging. Items must be returned in their original packaging for acceptance.
• Take a photo of the box markings (text) for part identification if replacement is needed. This helps staff identify your product number.
• Take a photo of any damaged parts. A photo of the damage is always required to file a claim and ensure quick processing of replacements or refunds.
• Send an email with the requested images and a description of your claim directly from the marketplace where the item was purchased.

Assembly Instructions

Before starting assembly, please separate and count all parts and hardware. We recommend assembling near the final location to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady, and stable surface.

Parts List:

• Ax1: Base panel
• Bx1: Back panel
• Cx2: Side panels
• Dx4: Drawer fronts
• Ex1: Top panel
• Fx1: Shelf
• Gx2: Shelf supports
• Hx1: Drawer box component
• Ix1: Drawer box component
• Jx10: Screws (M4x50)
• Kx8: Screws (M3x10)
• Lx2: Fasteners (M6x35)
• Mx2: Fasteners
• Nx2: Fasteners
• Ox1: Tool

Assembly Steps:

1. Step 1: Attach part E to part H using fasteners.
2. Step 2: Attach shelf supports (G) to the inner sides of the side panels (Cx2).
3. Step 3: Connect the base panel (Ax1) to the side panels (Cx2) and attach the back panel (Bx1).
4. Step 4: Secure the assembled frame using screws (Nx2) and other fasteners.
5. Step 5: Slide the shelves (Fx1) into the pre-drilled slots on the side panels.
6. Step 6: Attach the drawer fronts (Dx4) to the drawer box components (Hx1, Ix1).
7. Step 7: Secure the base panel (Ax1) to the bottom of the cabinet structure using screws (Kx8).
8. Step 8: Complete the cabinet structure by attaching remaining fasteners (Lx2, Mx2).
9. Step 9: Insert the assembled drawers into their respective openings in the cabinet.
10. Step 10: The Mirrored Jewelry Cabinet is now fully assembled.