Welcome
With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
US Office: Fontana
UK Office: Ipswich
DE Office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
FR Office: 26 RUE DU VERTUQUET, 59960 NEUVILLE EN FERRAIN, FRANCE
Email: ✉️ US: cs.us@costway.com | UK: cs.uk@costway.com | DE: cs.de@costway.com | FR: cs.fr@costway.com | ES: cs.es@costway.com | IT: cs.it@costway.com | PL: sklep@costway.pl
Before You Start
- ⚠️ Please read all instructions carefully.
- ⚠️ Retain instructions for future reference.
- ⚠️ Separate and count all parts and hardware.
- ⚠️ Read through each step carefully and follow the proper order.
- ⚠️ We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- ⚠️ Always place the product on a flat, steady and stable surface.
- ⚠️ Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Parts Included
- A: Wall mount bracket (x1)
- B: Over-the-door hook (x2)
- C: Screw (6*12mm) (x4)
- D: Wall anchor (x2)
- E: Screw (4*30mm) (x2)
- F: Adhesive pad (x2)
- H: Key (x2)
Assembly Instructions
Method 1: Wall Mount
Step 1: Mark Wall Measure the distance between the cabinet's rear hanging holes. Mark these measurements on the wall.
Step 2: Drill and Insert Anchors Drill two holes on the wall marks. Insert wall anchors (D) into the holes.
Step 3: Attach Cabinet Insert screws (E) through the cabinet's hanging holes into the anchors. Tighten securely but do not overtighten.
Step 4: Hang Cabinet Carefully hang the cabinet on the installed screws.
Method 2: Over-the-Door Mount
Step 1: Attach Hooks & Adhesive Attach over-the-door hooks (B) to the cabinet top. Apply adhesive pads (F) to the cabinet back if included.
Step 2: Secure Hooks Use screws (C) ? to attach hooks (B) to the cabinet.
Step 3: Hang on Door Hang the cabinet on the top edge of a door.
Step 4: Use Key Use the key (H) ? to unlock and open the cabinet.
Battery Instructions
Note: Requires 2- AA batteries (NOT INCLUDED).
- Locate the battery panel inside the top left corner of the cabinet.
- Slide the battery tab down to open the panel.
- Place 2-AA batteries into the compartment, observing correct polarity (+/-).
- Slide the panel closed.
- Turn on the LED light using the On/Off switch.
- Replace batteries as a set when needed.
Manual Guide and Notes
Guide
- Read and follow all instructions and safety warnings. Use the product as intended.
- Keep this manual for future reference. Pass it on if the product is transferred.
- Content is detailed; not all variations are included. Contact us for more information or difficulties.
Important Notes
- Product is a mirror and storage cabinet. Assemble and use strictly per manual. Seller not liable for incorrect assembly/use.
- Check cabinet and accessories are complete before mounting. Avoid placing unwrapped cabinet edge on the floor.
- When wall mounting, ensure holes are away from electrical wires or water pipes.
- Follow diagrams, position parts, and gradually tighten screws (do not overtighten).
- Mount using supplied or purchased accessories.
